|
US$519.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11144-2007: Standard test method for measurement of extreme-pressure properties of lubricating fluids (Timken method)
Status: Valid GB/T 11144: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 11144-2007 | English | 519 |
Add to Cart
|
4 days [Need to translate]
|
Standard test method for measurement of extreme-pressure properties of lubricating fluids (Timken method)
| Valid |
GB/T 11144-2007
|
| GB/T 11144-1989 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Lubricating fluids--Measurement of extreme pressure properties--Timken method
| Obsolete |
GB/T 11144-1989
|
PDF similar to GB/T 11144-2007
Basic data | Standard ID | GB/T 11144-2007 (GB/T11144-2007) | | Description (Translated English) | Standard test method for measurement of extreme-pressure properties of lubricating fluids (Timken method) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E30 | | Classification of International Standard | 75.080 | | Word Count Estimation | 20,280 | | Date of Issue | 2007-07-17 | | Date of Implementation | 2008-01-01 | | Older Standard (superseded by this standard) | GB/T 11144-1989 | | Quoted Standard | GB/T 686; SH 0114; SH/T 0203 | | Adopted Standard | ASTM D2782-2001, MOD | | Regulation (derived from) | China National Standard Announcement 2007 No.7 (Total No.107) - National-Standard-Commission | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the use of Timken extreme pressure lubricant testing machine measuring method of carrying capacity. This standard applies to evaluate the performance of extreme pressure lubricating fluid. 1. 2 standard used in SI units. But the standards used equipment is used imperial units, so when it comes to test equipment and test pieces, retaining the imperial units. 1. 3 This standard relates to certain hazardous materials, operation and equipment, but has no intention of all the security issues related to this are recommendations. Therefore, the user before using this standard to establish appropriate safety and health practices and determine the applicability of the management system, as detailed in Appendix C. | GB/T 11144-2007: Standard test method for measurement of extreme-pressure properties of lubricating fluids (Timken method)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard test method for measurement of extreme-pressure prosperties of lubricating fluids (Timken method)
ICS 75.080
E30
National Standards of People's Republic of China
GB/T 11144-2007
Replace GB/T 11144-1989
Lubricating fluid extreme pressure performance method
Released on.2007-07-17
2008-01-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration issued
Foreword
This standard is modified by the American Society for Testing and Materials Standard ASTM D2782-01 "Lubricating Fluid Extreme Pressure Performance Test Method (Temken
law)".
This standard was redrafted in accordance with ASTM D2782-01.
For comparison purposes, a checklist of the numbering of this standard chapter number and the ASTM D2782-01 chapter number is listed in Appendix G.
In order to be more suitable for China's national conditions, this standard has been modified when ASTM D2782-01 is adopted. This standard and ASTM
The main differences of D2782-01 are as follows.
--- Removed the standard that is not directly quoted by this standard in the reference standard of ASTM D2782-01, and the adopted standard adopts China.
Corresponding current standards.
For ease of use, the following editorial changes have been made to ASTM D2782-01.
--- The textual representation of the repeatability and reproducibility of ASTM D2782-01 has been modified according to the customs of our country;
--- ASTMD2782-01 Appendix X2.3 "Repetition and Reproducibility Limits" into the body of Chapter 12 "Precision";
--- omitted the description of the precision in ASTM D2782-01;
--- omitted the 13th chapter "Keywords" in ASTM D2782-01.
This standard replaces GB/T 11144-1989 "Test method for extreme pressure performance of lubricating oil (Temken test machine method)".
The main differences between this standard and GB/T 11144-1989 are as follows.
---The standard name has changed, from "Lubricating Oil Extreme Pressure Performance Measurement Method (Timken Test Machine Method)" to "Lubricating Fluid Extreme Pressure Performance Measurement Method"
Timken Act;
--- This standard is suitable for measuring the viscosity at 40 ° C is not higher than 5000mm2/s at the test temperature of 37.8 ° C ± 2.8 ° C
Sample; GB/T 11144-1989 version is suitable for the determination of the sample at 37.8 ° C viscosity not higher than 5400mm2/s;
--- The precision of the test method of this standard is. when the OK load is not lower than 66.7N (151bf), the repeatability is not more than the average value.
30%, the reproducibility is not more than 74% of the average value; the precision of GB/T 11144-1989 version is. the repeatability is not more than 2
At the load level, the reproducibility is no more than 4 load levels.
Appendix A, Appendix B and Appendix C of this standard are normative appendices, and Appendix D, Appendix E, Appendix F and Appendix G are informative appendices.
This standard was proposed by China Petrochemical Corporation.
This standard is under the jurisdiction of the National Petroleum Products and Lubricants Standardization Technical Committee (SAC/TC280).
This standard is mainly drafted by. China National Petroleum Corporation Lubricant Research and Development Center.
The main drafters of this standard. Lei Ailian, Min Minjie, Cai Jiyuan, Wu Jing.
This standard was first published as.
---GB/T 11144-1989.
GB/T 11144-2007
Lubricating fluid extreme pressure performance method
1 Scope
1.1 This standard specifies the method for determining the bearing capacity of lubricating fluids using the Timken Extreme Pressure Tester. This standard applies to the evaluation of lubricating fluid
Extreme pressure performance.
Note. This standard is suitable for the determination of samples with a viscosity below 40mm2/s at 40 °C. For samples with higher viscosity, refer to Note 2 in 9.1.
1.2 The International System of Units is used in this standard. However, the equipment used in this standard is in English units, so when it comes to test equipment
And the test piece, the English unit was retained.
1.3 This standard covers certain hazardous materials, operations and equipment, but is not intended to advise on all safety issues related to this.
Therefore, users should establish appropriate safety and protective measures before using this standard, and determine the applicable management system. See Appendix C for details.
2 Normative references
The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all
Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study
Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard.
GB/T 686 chemical reagent acetone
SH0114 Aviation washing gasoline
SH/T 0203 Grease extreme pressure performance test method (Temken test machine method)
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
It can react with the contacted metal surface to form a high-melting inorganic film to prevent sintering, chipping (or seizure) under high load,
Scratch or scratching additives.
3.2
A substance that is added between two opposing moving surfaces to reduce friction and reduce wear.
3.3
In the process of determining the bearing capacity of the lubricant, when the lubricant film is broken, the surface of the test piece is wide and deep in the sliding direction.
Bad phenomenon.
3.4
Refers to the phenomenon that the surface material of the test piece is continuously lost or residual deformation is measured when the extreme pressure performance of the lubricant is measured.
3.5
Usually means that under the given test conditions, the lubricant can withstand surfaces that do not scratch, bite or melt between the surfaces of the metal.
The maximum load or pressure in the form of a knot or the like.
GB/T 11144-2007
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11144-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 11144-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 11144-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11144-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 11144-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11144-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|