HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (12 Oct 2025)

GB/T 11016.3-2009 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11016.3-2009: Plastic or rubber insulated telephone cords -- Part 3: Polypropylene insulated telephone cords
Status: Valid

GB/T 11016.3: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 11016.3-2009	English	189	Add to Cart	3 days [Need to translate]	Plastic or rubber insulated telephone cords -- Part 3: Polypropylene insulated telephone cords	Valid	GB/T 11016.3-2009
GB/T 11016.3-1989	English	199	Add to Cart	2 days [Need to translate]	Plastic or rubber insulated telephone cords--Part 3: Polypropylene insulated telephone cords	Obsolete	GB/T 11016.3-1989

PDF similar to GB/T 11016.3-2009

Standard similar to GB/T 11016.3-2009

GB/T 9330 GB/T 12706.1 GB/T 12528 GB/T 11017.1 GB/T 11016.4 GB/T 11016.1

Basic data

Standard ID	GB/T 11016.3-2009 (GB/T11016.3-2009)
Description (Translated English)	Plastic or rubber insulated telephone cords -- Part 3: Polypropylene insulated telephone cords
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	K13
Classification of International Standard	29.060.20
Word Count Estimation	8,831
Date of Issue	2009-03-19
Date of Implementation	2009-12-01
Older Standard (superseded by this standard)	GB/T 11016.3-1989
Quoted Standard	GB/T 2951.11-2008; GB/T 2951.14-2008; GB/T 2951.31-2008; GB/T 3048.4-2007; GB/T 3048.5-2007; GB/T 3048.8-2007; GB/T 4909.2-2009; GB/T 4909.3-2009; GB/T 11016.1-2009; GB/T 11016.2-2009; YD/T 577-1992
Regulation (derived from)	Announcement of Newly Approved National Standards No. 3, 2009 (No. 143 overall)
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This standard specifies the polypropylene insulated telephone cords variety of products, technical requirements and inspection rules. This section applies to the telephone base and the telephone connection or junction box handle polypropylene insulated telephone cords. Polypropylene insulated telephone cords shall meet the requirements of this part, we must also comply with GB/T 11016. 1-2009 the corresponding requirements.

GB/T 11016.3-2009: Plastic or rubber insulated telephone cords -- Part 3: Polypropylene insulated telephone cords

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastic or rubber insulated telephone cords Part 3. Polypropylene insulated telephone cords ICS 29.060.20 K13 National Standards of People's Republic of China Replacing GB/T 11016.3-1989 Plastic or rubber insulated telephone cords Part 3. Polypropylene insulated telephone cords Posted 2009-03-19 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 11016 "plastic or rubber insulated telephone cords" is divided into four parts. --- Part 1. General requirements; --- Part 2. PVC insulated telephone cords; --- Part 3. Polypropylene insulated telephone cords; --- Part 4. Rubber insulated telephone cords. This section GB/T Part of 311,016. This Part replaces GB/T 11016.3-1989 "plastic or rubber insulated telephone cords Polypropylene insulated telephone cords." This section compared with the GB/T 11016.3-1989 The main changes are as follows. --- Increase the "Normative references" (1989 edition no; Chapter 2 of this section); --- Former version of the standard reference GB/T 10753 "indoor phone plug housing" is now changed to YD/T 577 "indoor telephone plugs and sockets"; --- According to GB/T 1.1-2000 requirements, the original standard format be modified. Appendix A of this section is normative appendix, Appendix B is an informative annex. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee Wire and Cable (SAC/TC213) centralized. This part of the unit responsible for drafting. Shanghai Electric Cable Research Institute. Participated in the drafting of this section. Hai Saike force on Optical Cable Co., Ltd., Ningbo, a boat Investment Group Co., Ltd., Wenzhou Yaohua Electric Communications Limited. The main drafters of this section. Song Jie, Wang Qingsong, Chen Jiande, Xinxiu Dong, Ye Qinghua, Lu Xiang, Geely, Zou Ye Long, Meng Qingfeng, Gao Huan. This part of the standard replaces the previous editions are. --- GB/T 11016.3-1989. Plastic or rubber insulated telephone cords Part 3. Polypropylene insulated telephone cords

1 Scope

GB/T 11016 provisions of this part of the polypropylene insulated telephone cords product variety, technical requirements and inspection rules. This section applies to connect the telephone base and the telephone junction box handle or polypropylene insulated telephone cords. Polypropylene insulated telephone cords shall comply with the requirements of this part, it must also comply with GB/T 11016.1-2009 the corresponding requirements.

2 Normative references

The following documents contain provisions which, through reference GB/T 11016 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2951.11-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 11. General test side Law --- --- Measurement of thickness and overall dimensions of mechanical tests (IEC 60811-1-1.2001, IDT) GB/T 2951.14-2008 cable insulation and sheathing materials test methods - Part 14. General test methods for low temperature --- Test (IEC 60811-1-4. 1985, IDT) GB/T 2951.31-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 31. Polyvinyl chloride mixture Special test methods for high temperature pressure test --- --- resistance to cracking (IEC 60811-3-1. 1985, IDT) GB/T 3048.4-2007 Test methods for electrical properties of the wire and cable conductor DC resistance test GB/T 3048.5-2007 Test methods for electrical properties of the wire and cable insulation resistance test GB/T 3048.8-2007 electrical wire and cable performance test methods AC voltage test GB/T 4909.2-2009 Test methods for bare wires - Part 2. Measure GB/T 4909.3-2009 Test methods for bare wires - Part 3. Tensile Test GB/T 11016.1-2009 plastic or rubber insulated telephone cords - Part 1. General requirements GB/T 11016.2-2009 plastic or rubber insulated telephone cords - Part 2. PVC insulated telephone cords YD/T 577-1992 indoor telephone plugs and sockets

3 Models

As shown in Table 1 Type polypropylene insulation telephone cord, the telephone cord suitable for use -10 ℃ ~ + 40 ℃ at room conditions. Table 1 Polypropylene insulated telephone cords models Model Name Purpose HRBBT polypropylene insulated PVC sheathed flat spring-shaped telephone cord to connect the telephone base and the telephone handle HRBB polypropylene insulated PVC sheathed flat flexible cable telephone base and the telephone junction box (or cartridge socket)

4 Specification

Polypropylene insulated telephone cords specifications as shown in Table 2.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11016.3-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 11016.3-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11016.3-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11016.3-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 11016.3-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11016.3-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.