|
US$1059.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10241-2020: General specification for electrical resolver
Status: Valid GB/T 10241: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10241-2020 | English | 1059 |
Add to Cart
|
7 days [Need to translate]
|
General specification for electrical resolver
| Valid |
GB/T 10241-2020
|
| GB/T 10241-2007 | English | RFQ |
ASK
|
5 days [Need to translate]
|
General specification for electrical resolver
| Obsolete |
GB/T 10241-2007
|
| GB/T 10241-1988 | English | RFQ |
ASK
|
9 days [Need to translate]
|
Resolver, electrical, General specification for
| Obsolete |
GB/T 10241-1988
|
PDF similar to GB/T 10241-2020
Basic data | Standard ID | GB/T 10241-2020 (GB/T10241-2020) | | Description (Translated English) | General specification for electrical resolver | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K24 | | Classification of International Standard | 29.160.30 | | Word Count Estimation | 57,521 | | Date of Issue | 2020-12-14 | | Date of Implementation | 2021-07-01 | | Older Standard (superseded by this standard) | GB/T 10241-2007 | | Quoted Standard | GB/T 2423.16-2008; GB/T 2828.1-2012; GB/T 2900.26; GB/T 7345-2008; GB/T 7346-2015; GB/T 18211-2017; JB/T 8162 | | Regulation (derived from) | National Standard Announcement No. 28 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | | Summary | This standard specifies the terms and definitions, classification and basic parameters, technical requirements and test methods, inspection rules, delivery preparations and user services for resolvers. This standard applies to the design, manufacture, inspection and acceptance of resolvers. | GB/T 10241-2020: General specification for electrical resolver---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(General technical requirements for resolvers)
ICS 29:160:30
K24
National Standards of People's Republic of China
Replace GB/T 10241-2007
General technical requirements for resolver
2020-12-14 release
2021-07-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Classification and basic parameters 1
5 Technical requirements and test methods 11
6 Inspection rules 45
7 Delivery preparation 48
8 User Service 49
Appendix A (informative appendix) Classification and product model 50
Reference 54
Foreword
This standard was drafted in accordance with the rules given in GB/T 1:1-2009:
This standard replaces GB/T 10241-2007 "General Technical Conditions for Resolvers": Compared with GB/T 10241-2007, the main technical
The technical changes are as follows:
--- Added XDX, XT, XFD, XBD, XUD, XFS, XBS, XBW, XFW, XFDW, XBDW, XFSW and XBSW
Technical requirements and test methods of type resolver (see 4:3);
---The direction of rotation has been increased from the end of the shaft extension (see 4:5, 5:3 in the:2007 edition);
---The voltage vector diagram specification is the voltage vector diagram (see 4:6, 5:5 in the:2007 edition);
--- The reference electrical zero position is deleted (see 5:7 in the:2007 edition);
---The terminal is divided into two parts: marking and strength (see 5:8 and 5:32, 5:10 and 6:7 of the:2007 edition);
---Added the technical requirements and test methods for the coaxiality of the installation mating surface (see 5:6);
---Added the technical requirements and test methods for the verticality of the installation mating end face (see 5:7);
---The function error expression has been deleted, and the function error direct reading voltage test method has been added (see 5:21, 5:21 and the:2007 edition
6:18);
---The linear error expression has been deleted, and the linear error direct reading voltage test method has been added (see 5:22, the:2007 edition of 5:22 and
6:19);
---The electrical error proportional voltage gradient method test method was deleted, and the electrical error angle indicator method and spin simulator method test were added
Method (see 5:23, 6:20 in:2007 edition);
--- Change electromagnetic interference to electromagnetic compatibility (see 5:31, 5:31 and 6:28 of the:2007 edition);
---Added vibration split-mounted stator and rotor fixing methods (see 5:34, 6:29 in:2007 edition);
---Added shock-mounted split stator and rotor fixing methods (see 5:35, 6:30 in:2007 edition);
--- Increased steady-state acceleration (see 5:36);
---Added the provisions of the wiring energization method in the low temperature test method (see 5:39, 6:33 of the:2007 edition);
---Added the regulation of the power connection method in the high temperature test method (see 5:40, 6:34 of the:2007 edition);
--- Increased temperature change (see 5:41);
---Added the provisions for the duration of constant heat and humidity (see 5:42:1, 5:38 in the:2007 edition);
---Added alternating damp heat (see 5:42:2);
--- Increase the duration of salt spray requirements (see 5:44, 5:40 in the:2007 edition);
--- Increased mold growth (see 5:45);
---Appendix A has been added:
This standard was proposed by China Electrical Equipment Industry Association:
This standard is under the jurisdiction of the National Micromotor Standardization Technical Committee (SAC/TC2):
Drafting organizations of this standard: Xi'an Institute of Micromotors, Shanghai Yingshuang Motor Co:, Ltd:, Zhejiang Julong Automation Equipment Co:, Ltd:, Shenzhen
Zhengde Intelligent Control Co:, Ltd:, Xiamen Yangmai Electric Co:, Ltd:, Shandong Depuda Motor Co:, Ltd:, Chengdu Micro Precision Motor Co:, Ltd:
Company, Hangzhou Jiangchao Motor Co:, Ltd:
The main drafters of this standard: Shen Guixia, Ling Shimao, Chen Zhaoming, Li Hao, Chen Geng, Wang Fujie, Xie Haidong, Lan Yuhua:
The previous versions of the standard replaced by this standard are as follows:
---GB/T 10241-1988, GB/T 10241-2007:
General technical requirements for resolver
1 Scope
This standard specifies the terms and definitions, classification and basic parameters, technical requirements and test methods, inspection rules, and delivery criteria for resolvers:
Equipment and user service:
This standard applies to the design, manufacture, inspection and acceptance of resolvers:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 2423:16-2008 Environmental testing of electric and electronic products Part 2: Test method Test J and guideline: Mould
GB/T 2828:1-2012 Sampling inspection procedure by attributes Part 1: Batch inspection sampling searched by acceptance quality limit (AQL)
plan
GB/T 2900:26 Electrician terminology control motor
GB/T 7345-2008 Basic technical requirements for control motors
GB/T 7346-2015 Control motor basic shape structure type
GB/T 18211-2017 General safety requirements for micromotors
JB/T 8162 Control Motor Packaging Technical Conditions
3 Terms and definitions
The following terms and definitions defined in GB/T 2900:26 apply to this document:
3:1
Harmonic distortion
The Fourier difference between the excitation power supply voltage waveform and the output voltage waveform:
4 Classification and basic parameters
4:1 Classification
Refer to Appendix A for the classification of resolvers:
4:2 Model naming
Refer to Appendix A for the model name of resolver, which is specified by the product-specific technical conditions:
4:3 Basic appearance structure and installation type
The basic shape structure and installation type of the resolver should meet the requirements of GB/T 7346-2015 or product-specific technical conditions:
Type; 28, 36 and 45 frame sizes use K3; 55 and 70 frame sizes use K4; 70 and above frame sizes use K6 or K7; 55 and
|