|
US$449.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10067.37-2024: Basic specifications for electroheating and electromagnetic processing installations - Part 37: Superconducting direct current induction through-heating installations
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10067.37-2024 | English | 449 |
Add to Cart
|
4 days [Need to translate]
|
Basic specifications for electroheating and electromagnetic processing installations - Part 37: Superconducting direct current induction through-heating installations
| Valid |
GB/T 10067.37-2024
|
Standard similar to GB/T 10067.37-2024 GB/T 10067.36 GB/T 10067.35 GB/T 10067.34 Basic data | Standard ID | GB/T 10067.37-2024 (GB/T10067.37-2024) | | Description (Translated English) | Basic specifications for electroheating and electromagnetic processing installations - Part 37: Superconducting direct current induction through-heating installations | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K61 | | Classification of International Standard | 25.180.10 | | Word Count Estimation | 22,222 | | Date of Issue | 2024-10-26 | | Date of Implementation | 2025-05-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 10067.37-2024: Basic specifications for electroheating and electromagnetic processing installations - Part 37: Superconducting direct current induction through-heating installations
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT10067.37-2024
ICS 25.180.10
CCSK61
National Standard of the People's Republic of China
Basic technical requirements for electric heating and electromagnetic treatment equipment
Part 37.Superconducting direct current induction diathermy devices
Released on October 26, 2024
Implementation on May 1, 2025
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction V
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Product Categories 3
5 Technical Requirements 4
6 Test Method 10
7 Inspection Rules 11
8 Marking, packaging, transportation and storage 12
9 Ordering and Delivery 12
Appendix A (Informative) Some Typical Temperatures of Hot Forming Processes 14
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document is part 37 of GB/T 10067 "Basic technical requirements for electrothermal and electromagnetic treatment equipment". GB/T 10067 has been published.
The following sections.
--- Part 1.General part;
--- Part 101.General requirements for vacuum electrothermal and electromagnetic treatment equipment;
--- Part 2.Arc heating device;
--- Part 21.Large AC electric arc furnaces;
--- Part 3.Induction heating device;
--- Part 31.Medium frequency coreless induction furnace;
--- Part 32.Voltage type variable frequency multiple medium frequency coreless induction furnace complete set;
--- Part 33.Power frequency coreless induction copper melting furnace;
--- Part 34.Transistor high frequency induction heating device;
--- Part 35.Medium frequency vacuum induction melting furnace;
--- Part 36.Induction heating devices;
--- Part 37.Superconducting DC induction diathermy device;
--- Part 4.Indirect resistance furnace;
--- Part 41.Mesh belt resistance heating unit;
--- Part 42.Push-type resistance heating units;
--- Part 43.Forced convection pit resistance furnace;
--- Part 44.Box-type resistance furnace;
--- Part 45.Vacuum quenching furnace;
--- Part 46.Bell-type resistance furnace;
--- Part 47.Vacuum heat treatment and brazing furnaces;
--- Part 48.Trolley-type resistance furnace;
--- Part 49.Natural convection pit type resistance furnace;
--- Part 410.Single crystal furnace;
--- Part 411.Electric heating baths;
--- Part 412.Box-type quenching furnace;
--- Part 413.Experimental resistance furnace;
--- Part 414.Industrial lapidary furnaces;
--- Part 415.Aluminum annealing furnace;
--- Part 416.Polysilicon ingot furnace;
--- Part 417.Silicon carbide single crystal growth apparatus;
--- Part 5.High frequency dielectric heating equipment;
--- Part 6.Industrial microwave heating equipment;
--- Part 8.Electroslag remelting furnace.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed by the China Electrical Equipment Industry Association.
This document is under the jurisdiction of the National Technical Committee for Standardization of Industrial Electric Heating Equipment (SAC/TC121).
This document was drafted by. Jiangxi Lianchuang Optoelectronics Superconducting Application Co., Ltd., Beijing Jiaotong University, Xi'an Electric Furnace Research Institute Co., Ltd., Xi'an
Huijin Technology Co., Ltd., CISDI Engineering Technology Co., Ltd., Zhejiang Baimahu Laboratory Co., Ltd., Shandong Huaning Electric Heating Technology Co., Ltd.
Technology Co., Ltd., Shaanxi Ruisen Metal Composite Materials Co., Ltd., Dongguan Maximco Electronic Technology Co., Ltd., Hengjin Induction Technology (Shiyan)
Co., Ltd., Shaanxi Energy Vocational and Technical College, Beijing Rexie Heat Treatment Technology Co., Ltd., Shanghai Superconducting Technology Co., Ltd.,
Jiangxi Lianchuang Optoelectronics Technology Co., Ltd., Northeast Light Alloy Co., Ltd., Shandong Nanshan Aluminum Co., Ltd., Xi'an Juneng Super
GUIDE MAGNET TECHNOLOGY CO., LTD.
The main drafters of this document are. Dai Shaotao, Mao Runhui, Xiao Xuewen, Xiao Peng, Ma Tao, Li Zhi, Li Kun, Zhang Yongwu, Yu Weijiang, Tong Xiaohui, Wu Rui,
Jiang Guozhong, Wang Weigang, Hong Zhiyong, Zeng Zhibin, Li Fangxin, Liu Xiandong, Cao Shanpeng, Li Chao, Chen Sikan, Zhou Xiangcheng, Zhao Jianxin, Du Yi, Cao Jiao,
Yin Qingjun, Zhong Xingli, Wu Yanmei, Sun Shien, Yu Libin, Liu Hongmei, Pan Zhenhua, Zhao Yuan, Zhang Jianhua, Xie Wenxia, and He Liqing.
introduction
Electric heating and electromagnetic treatment devices are important thermal process equipment in various industrial sectors of the national economy.
Electromagnetic treatment can also be classified according to different applications, different working frequencies and different working atmospheres. In order to ensure the development, production,
To promote the orderly use and sales of the device, promote its technological progress and improve product quality, and better meet the requirements of thermal process, it is necessary to formulate
This also provides the necessary conditions for the formulation of its safety and test method standards. In this regard, my country has established
GB/T 10067 "Basic Technical Requirements for Electric Heating and Electromagnetic Processing Equipment" series of standards consists of the general part and its supplement and the various specialized parts classified as above.
GB/T 10067 is intended to specify the product classification of electric heating and electromagnetic treatment devices and their design, manufacturing, safety, energy saving and
The requirements for environmental protection, performance and completeness need to be met and the verification method used to determine whether the requirements are met is described.
It consists of 40 parts.
--- Part 1.General. The purpose is to specify the general technical requirements for various types of electrothermal and electromagnetic processing equipment.
--- Part 101.General requirements for vacuum electrothermal and electromagnetic treatment devices. The purpose is to specify vacuum electrothermal and electromagnetic treatment devices
General technical requirements.
--- Part 102.General requirements for electrothermal and electromagnetic treatment equipment with protective and reactive atmospheres. The purpose is to specify various
General technical requirements for the device.
--- Part 2.Arc heating devices. The purpose is to specify the special technical requirements of arc heating devices.
--- Part 21.Large AC electric arc furnaces. The purpose is to specify the special technical requirements for large AC electric arc furnaces.
--- Part 22.Vacuum remelting arc furnace. The purpose is to specify the special technical requirements for vacuum remelting arc furnace.
--- Part 3.Induction heating devices. The purpose is to specify the special technical requirements of induction heating devices.
--- Part 31.Medium frequency coreless induction furnace. The purpose is to specify the special technical requirements for medium frequency coreless induction furnace.
--- Part 32.Voltage type frequency conversion multiple medium frequency coreless induction furnace complete set. The purpose is to specify the voltage type frequency conversion multiple medium frequency coreless induction furnace complete set.
Special technical requirements for complete sets of induction furnaces.
--- Part 33.Power frequency coreless induction copper melting furnace. The purpose is to specify the special technical requirements of power frequency coreless induction copper melting furnace.
--- Part 34.Transistor type high frequency induction heating device. The purpose is to specify the special technical requirements of transistor type high frequency induction heating device.
Technical requirements.
--- Part 35.Medium frequency vacuum induction melting furnace. The purpose is to specify the special technical requirements for medium frequency vacuum induction melting furnace.
--- Part 36.Induction diathermy devices. The purpose is to specify the special technical requirements for induction diathermy devices.
--- Part 37.Superconducting DC induction diathermy device. The purpose is to specify the special technical requirements of superconducting DC induction diathermy device.
--- Part 4.Indirect resistance furnace. The purpose is to specify the special technical requirements for indirect resistance furnaces.
--- Part 41.Mesh-belt resistance heating units. The purpose is to specify the special technical requirements for mesh-belt resistance heating units.
--- Part 42.Push-type resistance heating units. The purpose is to specify the special technical requirements for push-type resistance heating units.
--- Part 43.Forced convection pit type resistance furnace. The purpose is to specify the special technical requirements for forced convection pit type resistance furnace.
--- Part 44.Box-type resistance furnace. The purpose is to specify the special technical requirements for box-type resistance furnaces.
--- Part 45.Vacuum quenching furnaces. The purpose is to specify the special technical requirements for vacuum quenching furnaces.
--- Part 46.Bell-type resistance furnace. The purpose is to specify the special technical requirements for bell-type resistance furnaces.
--- Part 47.Vacuum heat treatment and brazing furnaces. The purpose is to specify the special technical requirements for vacuum heat treatment and brazing furnaces.
--- Part 48.Trolley-type resistance furnace. The purpose is to specify the special technical requirements for trolley-type resistance furnaces.
--- Part 49.Natural convection pit type resistance furnace. The purpose is to specify the special technical requirements for natural convection pit type resistance furnace.
--- Part 410.Single crystal furnace. The purpose is to specify the special technical requirements of single crystal furnace.
--- Part 411.Electric heating baths. The purpose is to specify the special technical requirements for electric heating baths.
--- Part 412.Box-type quenching furnaces. The purpose is to specify the special technical requirements for box-type quenching furnaces.
--- Part 413.Experimental resistance furnaces. The purpose is to specify the special technical requirements for experimental resistance furnaces.
--- Part 414.Industrial lapidary furnaces. The purpose is to specify the special technical requirements for industrial lapidary furnaces.
--- Part 415.Aluminium annealing furnaces. The purpose is to specify the special technical requirements for aluminium annealing furnaces.
--- Part 416.Polycrystalline silicon ingot furnace. The purpose is to specify the special technical requirements for polycrystalline silicon ingot furnace.
--- Part 417.Silicon carbide single crystal growth apparatus. The purpose is to specify the special technical requirements for silicon carbide single crystal growth apparatus.
--- Part 5.Electrothermal and electrochemical plasma equipment. The purpose is to specify the characteristics of electrothermal and electrochemical plasma equipment
Special technical requirements.
--- Part 6.Industrial microwave heating devices. The purpose is to specify the special technical requirements for industrial microwave heating devices.
--- Part 7.Electrothermal devices with electron guns. The purpose is to specify special technical requirements for electrothermal devices with electron guns.
--- Part 8.Electroslag remelting furnace. The purpose is to specify the special technical requirements of electroslag remelting furnace.
--- Part 9.High-frequency dielectric heating equipment. The purpose is to specify the special technical requirements for high-frequency dielectric heating equipment.
--- Part 10.Heating systems. The purpose is to specify the special technical requirements for heating systems.
--- Part 11.Electromagnetic processing equipment. The purpose is to specify the special technical requirements of electromagnetic processing equipment.
--- Part 12.Infrared electrothermal devices. The purpose is to specify the special technical requirements for infrared electrothermal devices.
This document is formulated in accordance with GB/T 10067.1-2019, and is based on the characteristics of superconducting DC induction diathermy devices.
The relevant regulations of.2019 are improved and supplemented.
Basic technical requirements for electric heating and electromagnetic treatment equipment
Part 37.Superconducting direct current induction diathermy devices
1 Scope
This document specifies the product classification, technical requirements, inspection rules, marking, packaging, transportation and storage of superconducting DC induction diathermy devices.
and ordering and supply, and describes the corresponding test methods.
This document is applicable to the working frequency of 3Hz~25Hz, for the blanks (or workpieces) mainly made of low resistivity, non-ferromagnetic metals and alloys.
A superconducting direct current induction diathermy device for overall or local heating (hereinafter referred to as "superconducting diathermy device").
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 150.4-2011 Pressure vessels Part 4.Manufacturing, inspection and acceptance
GB/T 2900.23 Electrical terminology Industrial electric heating devices
GB/T 2900.100 Electrical terminology - Superconductivity
GB/T 5959.1-2019 Safety of electric heating and electromagnetic processing equipment Part 1.General requirements
GB 5959.3-2008 Safety of electric heating devices Part 3.Special requirements for induction and conductive heating devices and induction melting devices
Require
GB/T 10066.1-2019 Test methods for electric heating and electromagnetic treatment equipment Part 1.General
GB/T 10066.32-2021 Test methods for electric heating and electromagnetic treatment devices Part 32.Induction heating devices
GB/T 10067.1-2019 Basic technical requirements for electric heating and electromagnetic treatment equipment Part 1.General
GB/T 10067.3-2015 Basic technical requirements for electric heating devices Part 3.Induction heating devices
GB/T 12604.6 Non-destructive testing terminology Eddy current testing
GB/T 16895.2 Low voltage electrical installations Part 4-42.Safety protection Thermal effects protection
GB/T 18442.4-2019 Stationary vacuum insulated cryogenic pressure vessels Part 4.Manufacturing
JB/T 9691 Method for compiling product models of electric heating equipment
3 Terms and Definitions
GB/T 2900.23, GB/T 2900.100, GB/T 12604.6 and GB/T 10066.32-2021 and the following terms and
Definitions apply to this document.
3.1
ferromagnetic
The magnetic permeability is much greater than 1, and the material can be magnetized and conduct magnetism.
3.2
non-ferromagnetic
Does not have ferromagnetic material properties.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10067.37-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 10067.37-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10067.37-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10067.37-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|