HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

GB/T 10002.2-2023 English PDF

US$799.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10002.2-2023: Unplasticized poly(vinyl chloride)(PVC-U)fittings for water supply
Status: Valid

GB/T 10002.2: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 10002.2-2023	English	799	Add to Cart	6 days [Need to translate]	Unplasticized poly(vinyl chloride)(PVC-U)fittings for water supply	Valid	GB/T 10002.2-2023
GB/T 10002.2-2003	English	RFQ	ASK	7 days [Need to translate]	Fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply	Obsolete	GB/T 10002.2-2003
GB/T 10002.2-1988	English	RFQ	ASK	9 days [Need to translate]	Unplasticized polyvinyl chloride (PVC-U) fitting for water supply	Obsolete	GB/T 10002.2-1988

PDF similar to GB/T 10002.2-2023

Standard similar to GB/T 10002.2-2023

GB/T 10006 GB/T 10004 GB/T 10003 GB/T 10002.1 GB/T 10002.3 GB 10010

Basic data

Standard ID	GB/T 10002.2-2023 (GB/T10002.2-2023)
Description (Translated English)	Unplasticized poly(vinyl chloride)(PVC-U)fittings for water supply
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	G33
Classification of International Standard	83.140.30
Word Count Estimation	42,481
Date of Issue	2023-09-07
Date of Implementation	2024-04-01
Issuing agency(ies)	State Administration for Market Regulation, China National Standardization Administration

GB/T 10002.2-2023: Unplasticized poly(vinyl chloride)(PVC-U)fittings for water supply

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 83.140.30 CCSG33 National Standards of People's Republic of China Rigid polyvinyl chloride (PVC-U) pipe fittings for water supply Published on 2023-09-07 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Preface III Introduction IV 1 Scope 1 2 Normative reference documents 1 3 Terms and definitions, symbols, abbreviations2 4 Material 2 5 Product Category 3 6 Requirement 3 7 System suitability 7 8 Test method 7 9 Inspection rules 8 10 Marking, packaging, transportation and storage 10 Appendix A (informative) Performance of rigid polyvinyl chloride (PVC-U) pipe fittings for water supply 11 Appendix B (informative) Installation dimensions of pipe fittings12 Appendix C (informative) Flange connection dimensions 31 Appendix D (Informative) Saddle type pipe fitting size 33 Reference 37

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is Part 2 of GB/T 10002.GB/T 10002 has published the following parts. ---Part 1.Rigid polyvinyl chloride (PVC-U) pipes for water supply; ---Part 2.Rigid polyvinyl chloride (PVC-U) pipe fittings for water supply; ---Part 3.Rigid polyvinyl chloride (PVC-U) valves for water supply. Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by China Light Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Plastic Products (SAC/TC48). This document was drafted by. AD Co., Ltd., Chengdu Chuanlu Plastic Group Co., Ltd., Guangdong Liansu Technology Industrial Co., Ltd., Zhejiang Jiangzhongcai Pipeline Technology Co., Ltd., Liaoning Provincial Product Quality Supervision and Inspection Institute, Beijing Building Materials Inspection Institute Co., Ltd., Jinde Pipe Industry Group Co., Ltd., Nanya Plastics Industry (Xiamen) Co., Ltd., Zhongshan Huanyu Industrial Co., Ltd., Light Industrial Plastic Processing Application Research Institute. The main drafters of this document. Huang Jian, Jia Lirong, Li Tongyi, Wang Baiti, Liu Hongbo, Yin Duoyuan, Chen Min, Lin Yanqing, Zeng Zhenguo, Xiang Aimin, Li Xiaohan.

Introduction

Plastic pipes and pipe fittings are widely used in urban tap water supply projects, internal and external building water supply projects, and farmland water conservancy and irrigation. Engineering, water supply projects for industrial and mining enterprises, water supply projects for landscaping and greening, aquaculture water supply and drainage projects, etc. GB/T 10002 aims to standardize the production and use of rigid polyvinyl chloride (PVC-U) pipes, fittings and valves for water supply. The olefin piping system consists of the following 3 parts. ---Part 1.Rigid polyvinyl chloride (PVC-U) pipes for water supply, the purpose is to standardize the technology of rigid polyvinyl chloride pipe products for water supply technical requirements; ---Part 2.Rigid polyvinyl chloride (PVC-U) pipe fittings for water supply, the purpose is to standardize the technology of rigid polyvinyl chloride pipe fittings for water supply technical requirements; ---Part 3.Rigid polyvinyl chloride (PVC-U) valves for water supply, the purpose is to standardize the technology of rigid polyvinyl chloride valve products for water supply technical requirements. Among them, Part 2 was first published as GB/T 10002.2-1988 in 1988, revised for the first time in.2003, and later changed to GB/T 10002.1- Replaced in.2006 and reformulated this time. Rigid polyvinyl chloride (PVC-U) pipe fittings for water supply

1 Scope

This document specifies the rigid polyvinyl chloride (PVC-U) compound used as raw material, which is injection molded and pipe-bent. Materials, product classifications, requirements, system applicability, inspection rules, marking, packaging and transportation of vinyl chloride (PVC-U) pipe fittings (hereinafter referred to as "pipe fittings") Transmission, storage, and test methods are described. This document is applicable to rigid polyvinyl chloride (PVC-U) pipe systems for underground water supply in buildings or outdoors with water temperatures not exceeding 45°C, including Pressure water transmission and potable water distribution for general purposes. This document also applies to pressure drainage piping systems. Note 1.For the pressure reduction coefficient at operating temperatures between 0°C and 45°C, see Appendix A in GB/T 10002.1-2023. Note 2.The purchaser is responsible for appropriately selecting the products specified in this document based on its specific application needs and in conjunction with relevant regulations, standards or specifications.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 1033.1 Determination of density of plastic non-foam plastics Part 1.Dip method, liquid pycnometer method and titration method GB/T 2828.1 Enumeration sampling inspection procedures Part 1.Batch-by-batch inspection sampling plan retrieved by acceptance quality limit (AQL) GB/T 2918 Standard environment for conditioning and testing of plastic specimens GB/T 4615 Determination of residual vinyl chloride monomer in polyvinyl chloride by gas chromatography GB/T 5761 Suspension method general-purpose polyvinyl chloride resin GB/T 6111 Determination of internal pressure resistance of thermoplastic piping systems for fluid transportation GB/T 7306 (all parts) 55° sealed pipe thread GB/T 8801 Drop test method for rigid polyvinyl chloride (PVC-U) pipe fittings GB/T 8802 Determination of Vicat softening temperature of thermoplastic pipes and fittings GB/T 8803 Injection molding rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C), acrylonitrile-butadiene-styrene triethylene Thermal oven test method for terpolymer (ABS) and acrylonitrile-styrene-acrylate terpolymer (ASA) pipe fittings GB/T 8806 Determination of dimensions of plastic components of plastic piping systems GB/T 10002.1-2023 Rigid polyvinyl chloride (PVC-U) pipes for water supply GB/T 17219 Safety Evaluation Standard for Drinking Water Transmission and Distribution Equipment and Protective Materials GB/T 19278 General terms and definitions for thermoplastic pipes, fittings and valves GB/T 19471.1 Angle sealing test for elastic sealing ring type socket joints of rigid polyvinyl chloride (PVC-U) pipes in plastic piping systems test method GB/T 19471.2 Negative pressure sealing test of elastic sealing ring socket joints for rigid polyvinyl chloride (PVC-U) pipes in plastic piping systems test method GB/T 21300 Determination of opacity of plastic pipes and fittings QB/T 2568 Solvent-based adhesive for rigid polyvinyl chloride (PVC-U) plastic piping systems

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10002.2-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10002.2-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10002.2-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10002.2-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10002.2-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10002.2-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.