|
US$459.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7121.1-2008: The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors -- Part 1: Static testing method of rear mounted ROPS
Status: Valid GB/T 7121.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 7121.1-2008 | English | 459 |
Add to Cart
|
4 days [Need to translate]
|
The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors -- Part 1: Static testing method of rear mounted ROPS
| Valid |
GB/T 7121.1-2008
|
| GB 7121-1986 | English | 879 |
Add to Cart
|
6 days [Need to translate]
|
Agricultural and forestry wheeled tractors--Protective structures--Test method in the strength and acceptance conditions
| Obsolete |
GB 7121-1986
|
PDF similar to GB/T 7121.1-2008
Basic data | Standard ID | GB/T 7121.1-2008 (GB/T7121.1-2008) | | Description (Translated English) | The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors -- Part 1: Static testing method of rear mounted ROPS | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | T69 | | Classification of International Standard | 65.060.10 | | Word Count Estimation | 20,217 | | Date of Issue | 2008-06-03 | | Date of Implementation | 2009-01-01 | | Older Standard (superseded by this standard) | GB 7121-1986 | | Quoted Standard | GB/T 229; GB/T 700; GB/T 3098; GB/T 6236; GB/T 6960.7-2007 | | Adopted Standard | ISO 5700-2006, MOD | | Regulation (derived from) | National Standard Approval Announcement 2008 No.9 (Total No.122) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the static test methods and acceptance criteria guards wheeled agricultural and forestry tractors. The purpose of the test is to guard the possibility that the normal operation of the tractor is caused by the roll-over accident to minimize driver injury. (Fall vacant except) is applied to the cab or safety shelves to test the strength of the load guard with analog back or side of the tractor overturned. This test can check the strength of the tractor guards and connecting bracket and the strength exerted by the load on the bearing device may affect those tractor parts. This section applies to a pneumatic tire tractor having at least two axes. A mass of 800kg ~ 15000kg, the rear wheel should be larger than the minimum track 1150mm. | GB/T 7121.1-2008: The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors -- Part 1: Static testing method of rear mounted ROPS
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors Part 1. Static testing method of rear mounted ROPS
ICS 65.060.10
T69
National Standards of People's Republic of China
Partly replace GB 7121-1986
Agricultural and forestry tractors guard strength
Test methods and acceptance criteria
Part 1. Static testing method of rear
(ISO 5700.2006, Tractorsforagricultureandforestry-Rol-overprotective
structures (ROPS) -Statictestmethodandacceptanceconditions, MOD)
Posted 2008-06-03 2009-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 7121 "agricultural and forestry tractors guard strength test method and acceptance conditions" is divided into four parts.
--- Part 1. Static testing method of rear;
--- Part 2. Rear dynamic test methods;
--- Part 3. front-static test methods;
--- Part 4. Front Dynamic testing method.
This section GB/T 7121 Part 1.
The partial modification of the use of ISO 5700.2006 "Agricultural and forestry wheeled tractors guard Static test method and acceptance conditions" (English
Chinese Version).
This section according to ISO 5700.2006 re-drafted.
Taking into account China's national conditions, in the use of ISO 5700.2006 When the following changes.
--- Changed the scope of application;
--- Normative documents references to our standards;
--- Increasing the elastic deformation measuring device;
--- Increasing the crush test side of the device shown in FIG.
These technical differences have been incorporated into the text, and they are involved in terms of the margin of a single vertical line identification.
For ease of use, this section also made the following editorial changes.
--- "This International Standard" be replaced by "this section";
"." --- With a decimal point instead of a comma as the decimal point, "";
--- Delete ISO 5700.2006 Foreword;
--- Increase the national standard foreword;
--- Change the standard name.
This Part replaces GB 7121-1986 "agricultural and forestry tractors guard strength test method and acceptance conditions" rear-mounted static
Test Methods section, because the development of the original standard international technically obsolete, according to the status change of tractor industry and the market
Modifications and additions of the corresponding content. In addition to editorial changes made the revision, but this part of the main changes compared with the GB 7121-1986
as follows.
--- Increased Chapter 2, "Normative references", modify the corresponding reference standard;
--- Increasing the term "agricultural and forestry tractors", "guard";
--- Increased in Chapter 4, "allows the measurement error", the tolerance has been modified;
--- Increasing the symbol "Rao h", "Rao v", "W";
--- To Chapter 6, "Test Equipment" supplement;
--- For dynamic load test weight bearing before the order to distinguish;
--- Longitudinal load and lateral load action point to be modified;
--- To modify the shelter area, and increase two-way traffic tractor working conditions;
--- In the acceptance conditions, the increase in articulated tractors and tractor overturned towards the direction of impact loading content when.
This section of the Appendix A, Appendix B are normative appendix.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee under the jurisdiction of the tractor.
This section drafted by. National Tractor Quality Supervision and Inspection Center.
The main drafters of this section. Wang storm, Zhen, Jin Xiping.
This part of the standard replaces the previous editions are.
--- GB 7121-1986.
Agricultural and forestry tractors guard strength
Test methods and acceptance criteria
Part 1. Static testing method of rear
1 Scope
This section provides the static test method and acceptance conditions for agricultural and forestry tractors guards.
Objective To test the protective device is to make the possibility of normal operation when the tractor rollover accidents caused by the driver's injuries is minimized.
With analog back or side overturn a tractor (excluding floating drop) is applied to the safety cab or frame to load testing protective devices
Strength. This test can check the strength of the guards and the tractor and the attachment brackets by the load exerted on the carrying device may affect the
Those strength tractor parts.
This section applies to a pneumatic tire having at least two axes of the tractor, a mass of 800kg ~ 15000kg, the rear wheels should be greater than the minimum tread
1150mm.
2 Normative references
The following documents contain provisions which, through reference to GB/T 7121 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 229 metal Charpy pendulum impact test method (GB/T 229-2007, ISO 148-1.2006, MOD)
GB/T 700 carbon structural steel (GB/T 700-2006, ISO 630.1995, NEQ)
GB/T 3098 (all parts) Mechanical properties of fasteners
GB/T 6236 Tractors and machinery for agriculture and forestry seat landmarks (GB/T 6236-2008, ISO 5353.1995, MOD)
GB/T 6960.7-2007 Tractor terminology - Part 7. Cab, seat and cover
3 Terms and Definitions
GB/T 6960.7-2007 established in the following terms and definitions apply GB/T 7121 of this section.
3.1
At least self-propelled wheeled or tracked vehicles both axes, designed mainly for the following basic agricultural and forestry purposes.
--- Tractor trailer;
--- Carrying, pulling or pushing agricultural and forestry machinery or equipment, and according to need, or traveling in a tractor parked state is supporting
Powered equipment.
3.2
During normal operation, the possibility that the driver of the tractor due to the incident to minimize harm framework.
3.3
Load in working condition quality tractors with add a little oil, water tanks and water tanks, protective equipment and metal cladding normally make
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7121.1-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 7121.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 7121.1-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7121.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 7121.1-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7121.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|