|
US$369.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 6514-2023: Safety code of practice for coating - Safety and ventilation for coating process
Status: Valid GB 6514: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 6514-2023 | English | 369 |
Add to Cart
|
4 days [Need to translate]
|
Safety code of practice for coating - Safety and ventilation for coating process
| Valid |
GB 6514-2023
|
| GB 6514-2008 | English | 599 |
Add to Cart
|
3 days [Need to translate]
|
Safety code for painting -- Safety, ventilation and air clean-up for painting process
| Obsolete |
GB 6514-2008
|
| GB 6514-1995 | English | 599 |
Add to Cart
|
4 days [Need to translate]
|
Safety code for painting--Safety, ventilation and air clean-up for painting process
| Obsolete |
GB 6514-1995
|
| GB 6514-1986 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Safety code for painting--Safety for painting process
| Obsolete |
GB 6514-1986
|
PDF similar to GB 6514-2023
Basic data | Standard ID | GB 6514-2023 (GB6514-2023) | | Description (Translated English) | Safety code of practice for coating - Safety and ventilation for coating process | | Sector / Industry | National Standard | | Classification of Chinese Standard | C72 | | Classification of International Standard | 13.100 | | Word Count Estimation | 18,151 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2024-10-01 | | Older Standard (superseded by this standard) | GB 6514-2008, GB 7692-2012 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB 6514-2023: Safety code of practice for coating - Safety and ventilation for coating process---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 13:100
CCSC72
National Standards of People's Republic of China
Replace GB 6514-2008, GB 7692-2012
Safety regulations for painting operations
Painting process safety and ventilation
Published on 2023-12-28
2024-10-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 General requirements 2
4:1 Work safety 2
4:2 Electrical equipment safety 3
4:3 Special operation safety 3
4:4 Ventilation requirements 3
5 Pretreatment process safety 4
5:1 General requirements 4
5:2 Safety of organic solvents and vapor phase degreasing 4
5:3 Paint stripping safety 4
5:4 Mechanical pre-processing safety 4
5:5 Chemical pretreatment safety 5
5:6 Steel pre-treatment production line safety 5
6 Coating process safety 6
6:1 General requirements 6
6:2 Storage and preparation of paint 6
6:3 Transport and handling of paint 6
6:4 Safety of air, air-mixed and airless spraying 7
6:5 Electrostatic spraying safety 7
6:6 Electrophoretic painting safety 7
6:7 Safety of dip coating, shower (flow) coating and roller coating 8
6:8 Safety of hand painting and hand scraping putty 8
7 Ventilation safety 8
7:1 Ventilation system 8
7:2 Ventilation of pre-treatment process 10
7:3 Coating process ventilation 10
Appendix A (informative) Upper and lower explosion limits of organic solvents commonly used in painting12
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document replaces GB 6514-2008 "Safety Regulations for Painting Operations: Safety of Painting Processes and Ventilation and Purification" and GB 7692-2012
"Safety Regulations for Painting Operations: Safety of Pre-painting Treatment Processes and Ventilation and Purification", consistent with GB 6514-2008 and GB 7692-2012
In addition to structural adjustments and editorial changes, the main technical changes are as follows:
a) Added the terms and definitions of “individual ventilation” (see 3:7) and “circulating air” (see 3:8);
b) Deleted the fire hazard classification of painting workplaces, the allowable concentration of toxic substances in the air of painting workplaces, workplaces and indoor
External temperature difference limit, winter heating air temperature at the workplace, temperature of the auxiliary room in winter, hygienic characteristic level of the painting workplace
Various parameters of hygiene limits for noise levels in workplaces (see Tables 1 to 7 of GB 6514-2008);
c) The drying and curing content has been deleted (see 5:8 of GB 6514-2008);
d) Delete the liquid level control wind speed of various pre-treatment tanks, the cross-sectional wind speed determined by the volume of the shot blasting chamber, and the wind speed determined by the nozzle diameter:
Various parameters of emission (see Table 1, Table 2, and Table 3 of GB 7692-2012);
e) Added regulations on the safety of the air-mixed spraying process (see 6:4) and the ventilation of the paint mixing room (see 7:3:1):
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed and managed by the Ministry of Emergency Management of the People's Republic of China:
The previous versions of this document and the documents it replaces are as follows:
---First published in 1986 as GB 6514-1986;
---In the first revision in:1995, the provisions of GB 6515-1986 "Safety Regulations for Painting Operations and Ventilation and Purification of Painting Processes" were incorporated
content;
---Second revision in:2008;
---This is the third revision and incorporates GB 7692-2012 "Safety Regulations for Painting Operations" Pre-painting process safety and its general
Contents of "Wind Purification" (the previous versions of GB 7692-2012 are: GB 7692-1987, GB 7692-1999 and
Incorporating the contents of GB 7693-1987 "Safety Regulations for Painting Operations, Ventilation and Purification of Pre-painting Processes"):
Safety regulations for painting operations
Painting process safety and ventilation
1 Scope
This document specifies the safety technical requirements for pre-treatment and coating processes and their ventilation during painting operations:
This document applies to the design, installation and use of pre-treatment processes and coating processes and their ventilation systems in painting operations:
This document does not apply to outdoor coating operations of bridges, buildings, large storage tanks, ships and other large components:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB 2494 Safety requirements for bonded abrasive tools
GB 2893 safety color
GB 2894 Safety signs and guidelines for their use
GB 4053:3 Safety requirements for fixed steel ladders and platforms Part 3: Industrial protective railings and steel platforms
GB 6220 Respiratory protection long tube respirator
GB 7691 Safety Regulations for Painting Operations General Principles of Safety Management
GB 8978 Comprehensive Wastewater Discharge Standard
GB 12367 Safety Regulations for Painting Operations Safety of Electrostatic Spray Painting Process
GB 14443 Safety Regulations for Painting Operations Safety Technical Regulations for Coating Drying Rooms
GB 14444 Safety Regulations for Painting Operations Safety Technical Regulations for Spray Rooms
GB 14773 Safety regulations for painting operations Safety technical conditions for electrostatic spray guns and their auxiliary devices
GB 15607 Safety Regulations for Painting Operations Safety of Powder Electrostatic Spraying Process
GB 16297 Comprehensive Emission Standard of Air Pollutants
GB 17750 Safety Regulations for Painting Operations Dip Coating Process Safety
GB :20101 Safety Regulations for Painting Operations Safety Technical Regulations for Organic Waste Gas Purification Devices
GB 30077 Requirements for emergency rescue supplies for hazardous chemicals units
GB 30871 Safety Specifications for Special Operations in Hazardous Chemical Enterprises
GB 39800:1 Specifications for Personal Protective Equipment Part 1: General Principles
GB 50016 Fire Protection Code for Building Design
GB 50057 Design Code for Lightning Protection of Buildings
GB 50058 Design Code for Electrical Equipment in Explosive Hazardous Environments
GB 50140 Design specifications for configuration of building fire extinguishers
GBZ 2:1 Occupational exposure limits for hazardous factors in the workplace Part 1: Chemical hazardous factors
GBZ 2:2 Occupational exposure limits for hazardous factors in the workplace Part 2: Physical factors
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 6514-2023_English be delivered?Answer: Upon your order, we will start to translate GB 6514-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 6514-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB 6514-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB 6514-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 6514-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|