HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (12 Oct 2025)

GB/T 5170.1-2016 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5170.1-2016: Inspection methods for environmental testing equipment for electric and electronic products -- Part 1: General
Status: Valid

GB/T 5170.1: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 5170.1-2016English359 Add to Cart 4 days [Need to translate] Inspection methods for environmental testing equipment for electric and electronic products -- Part 1: General Valid GB/T 5170.1-2016
GB/T 5170.1-2008English559 Add to Cart 3 days [Need to translate] Inspection methods for environmental testing equipment for electric and electronic products -- General Obsolete GB/T 5170.1-2008
GB/T 5170.1-1995English359 Add to Cart 3 days [Need to translate] Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. General Obsolete GB/T 5170.1-1995
GB 5170.1-1985English239 Add to Cart 2 days [Need to translate] Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--General and guidance Obsolete GB 5170.1-1985

PDF similar to GB/T 5170.1-2016


Standard similar to GB/T 5170.1-2016

GB/T 5169.19   GB/T 5169.21   GB/T 5169.16   GB/T 5170.8   GB/T 5170.9   GB/T 5170.2   

Basic data

Standard ID GB/T 5170.1-2016 (GB/T5170.1-2016)
Description (Translated English) Inspection methods for environmental testing equipment for electric and electronic products -- Part 1: General
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K04
Classification of International Standard 19.040
Word Count Estimation 18,130
Date of Issue 2016-12-13
Date of Implementation 2017-07-01
Older Standard (superseded by this standard) GB/T 5170.1-2008
Regulation (derived from) National Standard Notice No.57 of 2016
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 5170.1-2016: Inspection methods for environmental testing equipment for electric and electronic products -- Part 1: General


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Inspection methods for environmental testing equipments for electric and electronic products - Part 1. General ICS 19.040 K04 National Standards of People's Republic of China Replace GB/T 5170.1-2008 Inspection methods for environmental testing equipment for electric and electronic products Part 1. General forelectricandelectronicproducts-Part 1. General 2016-12-13 released 2017-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 Inspection conditions 11 5 Inspection equipment and requirements 11 6 inspection period 11 7 test load 11

8 Appearance and safety requirements of the equipment under test

9 Test Record Table 12 10 Inspection of test results 12

Foreword

GB/T 5170 is divided into the following sections. GB/T 5170.2-2008 Environmental testing equipment for electrical and electronic products - Test methods - Temperature test equipment GB/T 5170.5-2016 Environmental testing equipment for electric and electronic products - Test methods - Part 5. Damp heat test equipment GB/T 5170.8-2008 Environmental testing equipment for electric and electronic products - Salt spray test equipment GB/T 5170.9-2008 Environmental testing equipment for electrical and electronic products - Test methods for solar radiation test equipment GB/T 5170.10-2008 Environmental testing equipment for electrical and electronic products - High and low temperature and low pressure test equipment GB/T 5170.11-2008 Electrical and electronic products Environmental testing equipment Inspection methods Corrosion gas test equipment GB/T 5170.13-2005 Electrical and electronic products Environmental test equipment Basic parameters Verification method Vibration (sine) test With mechanical shaking table Electrical and electronic products - Environmental testing equipment - Basic parameters - Test methods - Vibration (sine) test GB/T 5170.14 With electric shaking table GB/T 5170.15-2005 Electrical and electronic products Environmental test equipment Basic parameters Verification method Vibration (sine) test Shake the table with hydraulic GB/T 5170.16-2005 Electrical and electronic products Environmental test equipment Basic parameters Verification method Steady-state acceleration test With a centrifuge GB/T 5170.17-2005 Electrical and electronic products Environmental testing equipment Basic parameters Verification method Low temperature/low pressure/wet Thermal sequence test equipment GB/T 5170.18-2005 Electrical and electronic products Environmental testing equipment Basic parameters Verification method Temperature/humidity combination The Ring test equipment --- GB/T 5170.19-2005 Electrical and electronic products Environmental testing equipment Basic parameters Verification method Temperature/vibration (sine) Integrated test equipment GB/T 5170.20-2005 Electrical and electronic products Environmental testing equipment Basic parameters Verification method Water test equipment GB/T 5170.21-2008 Electrical and electronic products Environmental testing equipment Basic parameters Test method Vibration (random) test Hydraulic shaking table This part is part 1 of GB/T 5170. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part of the GB/T 5170.1-2008 "electrical and electronic products environmental test equipment inspection methods", and GB/T 5170.1- 2008, the main technical content changes as follows. - Added in the normative reference documents GB/T 2298-2010, GB/T 2422-2012, GB/T 23715-2009; --- The definition of temperature deviation from the original "test chamber (room) stable state, the work space of the measurement points measured in the specified time the highest Temperature and minimum temperature and the nominal temperature of the upper and lower deviation, "modified to" test chamber (room) steady state, the work space of the measurement points The maximum deviation of the maximum temperature and the minimum temperature and the set temperature during the specified time "(see 3.2.4); --- Relative humidity deviation is defined by the original "test chamber (room) stable state, the work space of the measurement points measured within the specified time Maximum relative humidity and minimum relative humidity and the nominal relative humidity deviation ", modified to" test chamber (room) steady state, The maximum relative humidity and the minimum relative humidity and the relative humidity of the relative humidity are measured at the measured time in the working space. Poor "(see 3.2.5); The term "average temperature change rate per 5 min" is modified to "5 min temperature average rate of change", defined by the original "test chamber (Room) work space geometric center point measured between the two specified temperature between the average rate of change every 5min, with ℃/min table Show ", modified to" test chamber (room) work space geometric center point measured between the two specified temperature of any 5min time flat The rate of change is expressed in ° C/min "(see 3.2.11); - the definition of air pressure deviation from the original "test chamber (room) stable state, the work space measurement point measured within the specified time the highest gas Pressure and the minimum pressure and the nominal pressure of the upper and lower deviation, "modified to" test chamber (room) stable state, the work space measurement point in the regulation (See 3.2.12) for the maximum barometric pressure and minimum barometric pressure and set barometric pressure) - the terms "frequency range", "frequency stability", "background noise acceleration", "table magnetic flux leakage" are removed; - the terms "irradiance deviation", "sulfur dioxide concentration deviation", "hydrogen sulfide concentration deviation", "rainfall intensity", "raindrops straight "Vibration generator/vibration table/exciter", "vibration generator system", "electric vibration generator/electric vibration table", "electric Magnetic vibration generator/electromagnetic vibration table "," hydraulic vibration generator "," mechanical vibration generator "," sweep rate "," linear Sweep rate "," logarithmic (frequency) sweep rate "," amplitude "," sweep frequency accuracy "; - test instrument and requirements from the original "use of the measurement system of its measurement results of the expansion of uncertainty (k = 2) is not greater than the measured Parameter allows one-third of the deviation, the secondary instrument and a meter should be verified together, "modified to" specified by the specific provisions "(see Chapter 5); - The inspection report adds at least the information that should be included (see 10.3). This part of the National Electrical and Electronic Products Environmental Standards and Environmental Testing Standardization Technical Committee (SAC/TC8) proposed and centralized. This part of the drafting unit. Ministry of Industry and Information Technology Institute of Electronics Fifth, Guangzhou five Environmental Instruments Co., Ltd., China Electric Research Ltd., China Aviation Industry Corporation Beijing Great Wall Metrology and Testing Technology Research Institute, Guangdong Power Grid Co., Ltd. Electricity Science Research Institute, Wuxi Sunan Experimental Equipment Co., Ltd. This part of the main drafters. Wu Weixiong, Xie Chenhao, Huang Kaiyun, Lu Guoyi, Su Wei, Ni Yiming, Lai Wenguang, Lu Wangyan, Xie Kaifeng. This part of the previous version of the standard to replace the release of the situation. --- GB 5170.1-1985, GB/T 5170.1-1995, GB/T 5170.1-2008. Inspection methods for environmental testing equipment for electric and electronic products Part 1. General

1 Scope

This part of GB/T 5170 specifies the terms and definitions of environmental test equipment (hereinafter referred to as "equipment"), inspection conditions, inspection Inspection equipment and requirements, inspection cycle, inspection load, appearance and safety, inspection records, inspection results and so on. This part applies to electrical and electronic products for environmental testing equipment used in the test, other products for environmental testing equipment used in the inspection Inspection can also refer to use.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Mechanical vibration, shock and condition monitoring vocabulary GB/T 2421.1 Environmental and Environmental Testing of Electrical and Electronic Products GB/T 2422 Environmental test methods - Guidelines and definitions Vibration and shock generation system vocabulary

3 terms and definitions

GB/T 2298, GB/T 2421.1, GB/T 2422, GB/T 23715 and the following terms and definitions apply to this document. 3.1 General terms 3.1.1 Environmental conditions Products subject to the surrounding physical, chemical and biological conditions. 3.1.2 Environmental parameters environmentalparameters Characterize one or more of the physical, chemical and biological properties of environmental conditions. 3.1.3 Integrated test equipment combinedtestingequipments Simultaneous simulation of two or more environmental parameters of the test equipment. 3.1.4 Combined test equipment compositetestingequipments Can continuously simulate two or more environmental parameters of the test equipment. 3.1.5 Nominal value nominalvalue When testing environmental test equipment, according to the test method requirements of the environmental parameters required or as required before the determination of environmental parameters.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5170.1-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5170.1-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5170.1-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5170.1-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5170.1-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5170.1-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.