GB/T 4597: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 4597-2012 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Vocabulary of electronic tubes
| Valid |
GB/T 4597-2012
|
| GB/T 4597-1996 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Vocabulary of electronic tubes
| Obsolete |
GB/T 4597-1996
|
| GB 4597-1984 | English | RFQ |
ASK
|
14 days [Need to translate]
|
Terms of electron tubes
| Obsolete |
GB 4597-1984
|
PDF similar to GB/T 4597-2012
Standard similar to GB/T 4597-2012 GB/T 12631 GB/T 787 Basic data | Standard ID | GB/T 4597-2012 (GB/T4597-2012) | | Description (Translated English) | Vocabulary of electronic tubes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L35 | | Classification of International Standard | 31.100 | | Word Count Estimation | 154,110 | | Older Standard (superseded by this standard) | GB/T 4597-1996 | | Adopted Standard | IEC IEV 50531-1974, MOD | | Regulation (derived from) | National Standards Bulletin 2012 No. 28 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the basic terms and definitions tubes and tube structurally related terms and definitions, and tube categories related terms and definitions, characteristics associated with tube parameters and definitions of terms. | GB/T 4597-2012: Vocabulary of electronic tubes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS31.100
L35
National Standards of People's Republic of China
Replacing GB/T 4597-1996
Vocabulary tube
(IEC IEV50531. 1974, MOD)
Issued on. 2013-02-15 2012-11-05 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Basic terms 1
2.1 General classification of tube 1
2.2 launch and space charge 2
2.3 gas discharge 4
2.4 electron-beam/focus and deflection Note 6
2.5 8 valve noise
2.6 voltage, current, and power 12
2.7 voltage, current and power than the general performance and parameters 17
2.8 Characteristics and working conditions 21
Pulse characteristics 25 2.9
3 Structure 28
3.1 electrode (in general), and an emitter element 28
3.2 Control and collecting electrode 30
3.3 Structure (envelope, gun and accessory) 35
4 Tube Type 39
4.1 space charge controlled tubes and diodes 39
4.2 space charge wave tubes and space - charge controlled microwave tubes 42
4.3 A cathode ray tube and the storage tube 46
4.4 photodiodes 49
4.5 inflatable tube 52
4.6 X-ray tube 57
5 performance and parameters 58
5.1 space charge wave tubes and space - charge controlled microwave tubes 58
A cathode ray tube 68 5.2
5.3 storage tube 75
5.4 photodiodes 81
5.5 camera tube 86
5.6 other than radiation counter tube inflatable tube 90
5.7 Radiation counter 101
5.8 X-ray tube 104
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
This standard replaces GB/T 4597-1996 "tube vocabulary."
This standard and GB/T 4597-1996 compared to the main changes are as follows.
--- Delete the original standard 2.1.27, 2.1.28 and 3.7 "plasma display device" content, and delete the original standard 4.6.117 ~
4.6.133 The name and content.
--- Delete the original equation (1).
--- Increasing the term "multi-beam traveling wave tube" (see 4.2.39), "cold cathode magnetron" (see 4.2.41), "Rush leakage power" (see 5.6.43).
--- Modify some of the terminology and definitions name content.
--- Format change. Original Chapter 1, Chapter 2, Section 3, Chapter 4, Chapter 2, respectively of this standard, Chapter 3, Chapter 4,
Chapter 5.
This standard uses the redrafted law revision adopted IEC IEV50531. 1974. "International Electrotechnical dictionary - Part 531. Valve" This
After the same standard definition of the term or at the end of the title is given IEC IEV50531. in 1974 the corresponding number.
The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This standard by the National Standardization Technical Committee electric vacuum devices (SAC/TC167) centralized.
This standard was drafted. China Electronics Standardization Institute.
The main drafters. Zhang Peng, Chen Lan.
The standard standard replaces the previous editions.
--- GB/T 4597-1984, GB/T 4597-1996.
Vocabulary tube
1 Scope
This standard specifies the basic terms and definitions tube, and the tube structurally related terms and definitions, and tube categories related terms
And definitions, and tube parameter characteristics related terms and definitions.
2 Basic terms
2.1 tube general classification
[IEC IEV50531. 1974, defined 531-11]
2.1.1
Electronics electronicdevice
Mainly by the movement of electrons in a vacuum, gas or semiconductor to achieve electrical conduction in one device.
[IEC IEV50531. 1974, defined 531-11-01]
2.1.2
Tube electronictube
In the airtight envelope in a vacuum or gaseous medium of electrons or ions to achieve electrical conduction between the electrodes of an electronic device. However,
Except only for lighting devices.
[IEC IEV50531. 1974, defined 531-11-02]
2.1.3
Vacuum vacuumtube
Vacuum tube reaches its electrical characteristics are substantially free from any residual affect the ionization of a gas or vapor tube.
[IEC IEV50531. 1974, defined 531-11-03]
2.1.4
Electron beam tube electron-beamtube
Performance depends on a tube or a plurality of one electron beam formation and control.
[IEC IEV50531. 1974, defined 531-11-04]
2.1.5
Inflatable tube gas-filedtube
Ion tube iontube
An electron tube electrical characteristics substantially artificially introduced by the ionization of the gas to decide.
[IEC IEV50531. 1974, defined 531-11-05]
2.1.6
Microwave tube microwavetube
Working in a microwave band tube.
2.1.7
X-ray tube X-raytube
Electrons generated from the cathode by an electric field to accelerate the bombardment of the anode target to generate X-ray radiation of high vacuum devices such as rotating anode X-ray
Control, dual-focus X-ray tube.
|