|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 44018-2024: Line-throwing appliances for ship
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 44018-2024 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Line-throwing appliances for ship
| Valid |
GB 44018-2024
|
Standard similar to GB 44018-2024 GB/T 45984 GB/T 45985 Basic data | Standard ID | GB 44018-2024 (GB44018-2024) | | Description (Translated English) | Line-throwing appliances for ship | | Sector / Industry | National Standard | | Classification of Chinese Standard | U27 | | Classification of International Standard | 47.020.50 | | Word Count Estimation | 14,144 | | Date of Issue | 2024-04-29 | | Date of Implementation | 2024-11-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB 44018-2024: Line-throwing appliances for ship---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 47:020:50
CCSU27
National Standards of People's Republic of China
Marine rope thrower
Released on 2024-04-29
2024-11-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General Requirements 1
5 Technical Requirements 2
6 Test methods 3
7 Inspection Rules 4
8 Marking, packaging, transportation, storage 5
References 7
Foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents"
Drafting:
Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents:
This document is proposed and coordinated by the Ministry of Transport of the People's Republic of China:
Marine rope thrower
1 Scope
This document specifies the general requirements, technical requirements, inspection rules, marking, packaging, transportation and storage of marine rope throwers, and describes the corresponding
experiment method:
This document applies to the production and inspection of rocket-driven marine rope-throwing devices used for rescue operations on ships and offshore installations in distress:
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document:
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document:
GB/T 2423:1 Environmental testing for electric and electronic products Part 2: Test methods Test A: Low temperature
GB/T 2423:2 Environmental testing for electric and electronic products Part 2: Test methods Test B: High temperature
GB/T 2423:3 Environmental testing Part 2: Test method Test Cab: Steady state damp heat test
GB/T 2423:17 Environmental testing for electric and electronic products Part 2: Test methods Test Ka: Salt spray
GB/T 2423:22 Environmental testing Part 2: Test method Test N: Temperature change
3 Terms and definitions
The following terms and definitions apply to this document:
3:1
Launch distance
The horizontal projection distance between the launch point and the landing point of the ship's line throwing device:
[Source: GB/T 27906-2011, 3:3, modified]
4 General requirements
4:1 Structure
The marine rope throwing device (hereinafter referred to as the "rope throwing device") shall at least consist of a firing handle, a protective ring, a gun body, a steel wire rope, a towing rope rack, a propelling rocket, and a throwing rope:
The schematic diagram of the rope throwing device is shown in Figure 1:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 44018-2024_English be delivered?Answer: Upon your order, we will start to translate GB 44018-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 44018-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB 44018-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|