HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

GB 1886.71-2015 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1886.71-2015: National Food Safety Standard -- Food Additives - 1, 2-dichloroethane
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 1886.71-2015English169 Add to Cart 3 days [Need to translate] National Food Safety Standard -- Food Additives - 1, 2-dichloroethane Valid GB 1886.71-2015

PDF similar to GB 1886.71-2015


Standard similar to GB 1886.71-2015

GB 1886.300   GB 1886.98   GB 1886.74   GB 1886.75   GB 1886.77   GB 1886.72   

Basic data

Standard ID GB 1886.71-2015 (GB1886.71-2015)
Description (Translated English) National Food Safety Standard -- Food Additives - 1, 2-dichloroethane
Sector / Industry National Standard
Classification of Chinese Standard X40
Word Count Estimation 8,826
Date of Issue 2015-09-22
Date of Implementation 2016-03-22
Regulation (derived from) PRC National Health and Family Planning Commission 2015 No.8
Issuing agency(ies) National Health and Family Planning Commission of the People's Republic of China

GB 1886.71-2015: National Food Safety Standard -- Food Additives - 1, 2-dichloroethane

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(National food safety standards for food additives 1, 2-dichloroethane) National Standards of People's Republic of China National Food Safety Standard Food Additives 1,2-dichloroethane Issued on. 2015-09-22 2016-03-22 implementation People's Republic of China National Health and Family Planning Commission released National Food Safety Standard Food Additives 1,2-dichloroethane

1 Scope

This standard applies to the reaction of chlorine with ethylene food additive 1,2-dichloroethane. 2 chemical name, structural formula, molecular formula and relative molecular mass 2.1 Chemical Name 1,2-dichloroethane 2.2 formula CCl Cl Formula 2.3 C2H4Cl2 2.4 relative molecular mass 98.96 (according to 2007 international relative atomic mass)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods Color colorless Flowable state transparent oily liquid Take appropriate sample is placed in a clean, dry stoppered Erlenmeyer flask, in Natural light, to observe its color and status 3.2 Physical and Chemical Indicators Physical and chemical indicators should be consistent with the provisions of Table 2. Table 2. Physical and chemical indicators Item Index Test Method Refractive index (n20D) 1.444 ~ 1.446 GB/T 614 The relative density (d2020) 1.245 ~ 1.255 GB 5009.2 Boiling range/℃ 82 ~ 85 GB/T 615 Water, w /% ≤ 0.03 GB/T 606 Acidity (HCl meter)/(mg/kg) ≤ 10.0 Appendix A A.3 Free halogen test by test A.4 in Appendix A Evaporation residue, w /% ≤ 0.002 GB/T 9740 Lead (Pb)/(mg/kg) ≤ 1.0 GB 5009.12

Appendix A

Testing method A.1 General Provisions This standard reagents and water, did not indicate when the other requirements, refer to the three water analytical reagent and GB/T 6682 regulations. test Test used in the standard solution, impurity standard solution, preparations and products, did not indicate when the other requirements, according to GB/T 601, GB/T 602 and GB/T 603 provisions prepared. Solution was used in the tests did not indicate what is formulated with solvent, it refers to an aqueous solution. A.2 Identification Test A.2.1 solubility A.2.1.1 organic solvent solubility. Take 5mL sample in 100mL with stopper colorimetric tube, either take 1 to 10 times by volume of ethanol, respectively, B The organic solvent is mixed with a sample ether, acetone, shaken for 1min, allowed to stand for 10min, was observed whether delamination. The specimen shall ethanol, ether, acetone Miscible. A.2.1.2 Water solubility. Take 0.5mL sample in 100mL with stopper colorimetric tube, add water mixing ratio more than 100 times the volume of the sample, Shaking 1min, allowed to stand for 10min, was observed whether delamination. Samples were dissolved in about 120 times the volume of water. A.2.2 1,2- dichloroethane mass spectrometry A.2.2.1 Method summary Sample directly into the gas chromatograph mass spectrometer after separation of 1,2-dichloroethane in the capillary column gas chromatography mass spectrometer Full scan mode to detect qualitatively. A.2.2.2 Reagents and materials A.2.2.2.1 1,2- dichloroethane standards. 99% or greater purity. A.2.2.2.2 hexane. chromatographically pure. A.2.2.3 instruments and equipment GC - MS. A.2.2.4 Identification of A.2.2.4.1 reference gas chromatographic conditions Reference gas chromatographic conditions were as follows. a) Column. capillary column WAXMS30m × 0.25mm × 0.25μm or equivalent person; b) inlet temperature. 230 ℃; c) Injection mode. split injection, split ratio of 1.50; d) Injection volume. 0.2μL; e) Column temperature. initial temperature 40 ℃, to 5 ℃/min temperature is increased up to 90 ℃, with 40 ℃/min temperature is increased up to 250 ℃; f) Carrier gas. helium, purity not less than 99.999%; g) flow rate. 1.0mL/min (constant current). A.2.2.4.2 reference mass spectrometry conditions Reference MS measurement conditions are as follows. a) GC-MS interface temperature. 280 ℃; b) ion source. electron bombardment ion source, 70eV; c) Ion source temperature. 230 ℃; d) Solvent delay. 2min; e) quality scan mode. full scan data; f) ion scan range (m/z). 20 ~ 300. A.2.2.4.3 Determination Injection of standard solution 0.2μL in A.2.2.4.1 and A.2.2.4.2 conditions, gas chromatography mass spectrometry. 1,2-dichloroethane Reference retention time 3.690min. Standard product spectrum, Appendix B, Figure B.1. A.3 Acidity (HCl meter) measurement A.3.1 Reagents and materials A.3.1.1 ethanol. A.3.1.2 sodium hydroxide standard titration solution, c (NaOH) = 0.01mol/L. A.3.1.3 phenolphthalein indicator solution. 10g/L. A.3.2 Instruments and Equipment A.3.2.1 analytical balance. a sense of the amount of 0.0001g. A.3.2.2 stoppered conical flask. 100mL. A.3.2.3 single standard pipette. 25mL. A.3.2.4 Buret. 10mL, minimum scale 0.05mL. A.3.3 Analysis step Take ethanol 25mL, 100mL moved with frosted glass stopper mouth Erlenmeyer flask, add 2 drops of phenolphthalein indicator solution. With sodium hydroxide standard drops The first time in a given solution was titrated to a pale pink. Single standard pipette sample 25mL (about 31g), mixed with sodium hydroxide standard titration Titrate to a pale pink appears again, record the volume of sodium hydroxide standard titration solution consumed at this time. Its consumption should not exceed 0.85mL. A.3.4 Calculation Results Acidity (HCl dollars) w2, in milligrams per kilogram (mg/kg), according to formula (A.1) Calculated. w2 = c × V1 × M ρ × V × 1000 (A.1) Where. C --- concentration of sodium hydroxide standard titration solution, expressed in moles per liter (mol/L); V1 --- consumption volume of sodium hydroxide standard titration solution, in milliliters (mL); --- The M hydrochloric acid in molar mass in grams per mole (g/mol), M (HCl) = 36.45; Density ρ --- sample in grams per milliliter (g/mL); --- The V sample volume in milliliters (mL of); 1000 --- conversion factor. A.4 free halogen test A.4.1 Reagents and materials A.4.1.1 potassium iodide solution. 10%. A.4.1.2 starch solution. Take 1g of starch is mixed with red mercuric oxide 0.01g, add enough cold water to make a thin paste. Add boiling water 20mL, stirring constantly boil 1min, cool. Take the supernatant for use. A.4.2 Analysis step Take a sample 10mL, 10% potassium iodide solution (A.4.1.1) 10mL and starch solution (A.4.1.2) 1mL mixed after strong shaking 2min, standing layer, the aqueous layer was observed whether the color blue, the same color blue as the water layer by experiment.

Appendix B

1,2-dichloroethane standard gas chromatography mass spectrum 1,2-dichloroethane standard GC-MS is shown in Figure B.1. Figure B.1 1,2- dichloroethane standard gas chromatography mass spectrum 5102- 17􀏕 6881

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 1886.71-2015_English be delivered?

Answer: Upon your order, we will start to translate GB 1886.71-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 1886.71-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB 1886.71-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.