HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB 1886.70-2015 English PDF

US$129.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1886.70-2015: National Food Safety Standard -- Food Additives -- Sa-son seed gum
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 1886.70-2015English129 Add to Cart 3 days [Need to translate] National Food Safety Standard -- Food Additives -- Sa-son seed gum Valid GB 1886.70-2015

PDF similar to GB 1886.70-2015


Standard similar to GB 1886.70-2015

GB 1886.300   GB 1886.98   GB 1886.74   GB 1886.75   GB 1886.77   GB 1886.72   

Basic data

Standard ID GB 1886.70-2015 (GB1886.70-2015)
Description (Translated English) National Food Safety Standard -- Food Additives -- Sa-son seed gum
Sector / Industry National Standard
Classification of Chinese Standard X40
Word Count Estimation 6,635
Date of Issue 2015-09-22
Date of Implementation 2016-03-22
Regulation (derived from) PRC National Health and Family Planning Commission 2015 No.8
Issuing agency(ies) National Health and Family Planning Commission of the People's Republic of China

GB 1886.70-2015: National Food Safety Standard -- Food Additives -- Sa-son seed gum

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(National food safety standards for food additives artemisia glue) National Standards of People's Republic of China National Food Safety Standard Food Additives artemisia glue Issued on. 2015-09-22 2016-03-22 implementation People's Republic of China National Health and Family Planning Commission released National Food Safety Standard Food Additives artemisia glue

1 Scope

This standard applies to Artemisia (ArtemisiaL.) Seeds as raw material extraction and processing water-swellable prepared food additive artemisia glue.

2 Technical Requirements

2.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods Milky white or light yellow color State powder Take appropriate sample is placed in a clean, dry white porcelain dish, self Under natural light, observe its color and status 2.2 Physical indicators Physical and chemical indicators should be consistent with the provisions of Table 2. Table 2. Physical and chemical indicators Item Index Test Method Fineness (through a sieve aperture of 336μm) /% ≥ 90 GB/T 5507 Viscosity (1.0% solution) (20 ℃) / (mPa · s) ≥ 600 Appendix A A.3 pH 4.0 ~ 7.5 in Appendix A A.4 Water, w /% ≤ 10.0 GB 5009.3 Ash, w /% ≤ 8.0 GB 5009.4 Starch test by test A.5 in Appendix A Protein, w /% ≤ 10.0 GB 5009.5 Lead (Pb)/(mg/kg) ≤ 3.0 GB 5009.12 Total arsenic (As)/(mg/kg) ≤ 3.0 GB 5009.11

Appendix A

Testing method A.1 General Provisions This standard reagents and water, did not indicate when the other requirements, refer to the three water analytical reagent and GB/T 6682 regulations. test Test used in the standard solution, impurity standard solution, preparations and products, did not indicate when the other requirements, according to GB/T 601, GB/T 602 and GB/T 603 provisions prepared. Solution was used in the tests did not indicate what is formulated with solvent, it refers to an aqueous solution. A.2 Identification Test A.2.1 Identification of the water-absorbing shaped Weigh the sample 0.5g, placed in a beaker filled with 300mL cold water of 0 ℃ ~ 4 ℃ and gently shaking the beaker vibration surface, so that particles disperse Swelling, the formation of this product unique tough tendons creamy egg white fluff-like gel, filtered water, add a little potassium aluminum sulfate dodecahydrate, stirred extrusion should Forming a glue cotton wool fibers. A.2.2 Infrared Spectroscopy The method according to GB/T 6040 provisions were weighed sample of about 1mg to about 100mg of potassium bromide and straight grinding in an agate mortar To mix, take a little of the mixture powder was poured into the mold with tablet tablet is compressed into a transparent sheet (salt window), and then put the infrared light Infrared spectrometer on the scan, the scanning range 4000cm-1 ~ 400cm-1, to obtain its infrared transmission spectrum. An infrared spectrum of the sample Figure with standard infrared absorption spectra of the degree of similarity in the 4000cm-1 ~ 400cm-1 Scope for compound characterization. red Outside the spectrum of Appendix B in Figure B.1. A.3 viscosity (1.0% solution) (20 deg.] C) measured A.3.1 Instruments A.3.1.1 viscometer. viscometer. A.3.1.2 tall beaker. 500mL. A.3.1.3 water bath. Temperature accuracy 0.2 ℃. A.3.2 Analysis step Weigh the dried sample 3g (accurate to 0.01g), dispersed in 300mL water, stirred for about 1h after swelling, stirring while heating to boiling, With boiling water, make up the evaporation of water, stir well, into a beaker covered with a watch glass placed in a constant temperature water bath at 6h ~ 8h 20 ℃ ± 1 ℃, according to Viscometer operating instructions viscosity measurement. A.4 pH measurement A.4.1 Instruments and Equipment A.4.1.1 pH meter. measuring range of 0 to 14, the minimum scale value of 0.02. A.4.1.2 centrifuge. maximum speed of 4000r/min. A.4.2 Analysis step Weigh 1g (accurate to 0.01g) sample is placed in a beaker, water was added 100mL25 ℃, shaking 30min, to 3000r/min centrifugal 5min, the supernatant was measured by using pH. A.5 starch test A.5.1 Reagents and materials A.5.1.1 potassium iodide solution. Weigh 36.0g of potassium iodide was dissolved in 100mL aqueous solution. A.5.1.2 iodine solution. Weigh 14.0g of iodine dissolved in potassium iodide solution (A.5.1.1), the shake, add 3 drops of hydrochloric acid, water to the 1000mL. A.5.2 Analysis step Weigh the sample 1.0g (accurate to 0.1g) in 50mL beaker, add water, 10mL, stir with a glass rod, after boiling to room temperature, add 0.1mol/L iodine solution (A.5.1.2) 2 drops, stir well, no significant blue experimentally.

Appendix B

Artemisia glue infrared spectra Artemisia glue infrared spectrum shown in Figure B.1. Note. The sample preparation method for the potassium bromide tablet method. Figure B.1 artemisia glue infrared spectra

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 1886.70-2015_English be delivered?

Answer: Upon your order, we will start to translate GB 1886.70-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 1886.70-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB 1886.70-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.