HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB 1886.55-2015 English PDF

US$129.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1886.55-2015: National Food Safety Standard -- Food Additives -- Butane
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 1886.55-2015English129 Add to Cart 3 days [Need to translate] National Food Safety Standard -- Food Additives -- Butane Valid GB 1886.55-2015

PDF similar to GB 1886.55-2015


Standard similar to GB 1886.55-2015

GB 1886.300   GB 1886.210   GB 1886.40   GB 1886.49   GB 1886.57   GB 1886.47   

Basic data

Standard ID GB 1886.55-2015 (GB1886.55-2015)
Description (Translated English) National Food Safety Standard -- Food Additives -- Butane
Sector / Industry National Standard
Classification of Chinese Standard X40
Word Count Estimation 6,611
Date of Issue 2015-09-22
Date of Implementation 2016-03-22
Regulation (derived from) PRC National Health and Family Planning Commission 2015 No.8
Issuing agency(ies) National Health and Family Planning Commission of the People's Republic of China

GB 1886.55-2015: National Food Safety Standard -- Food Additives -- Butane

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(National food safety standards for food additives butane) National Standards of People's Republic of China National Food Safety Standard Food additives butane Issued on. 2015-09-22 2016-03-22 implementation People's Republic of China National Health and Family Planning Commission released National Food Safety Standard Food additives butane

1 Scope

This standard applies to natural gas by the fractionation after oil absorption or frozen prepared food additive butane. 2 molecular formula, relative molecular mass and structural formula Formula 2.1 C4H10 2.2 formula CH3-CH2-CH2-CH3 2.3 relative molecular mass 58.12 (according to 2007 international relative atomic mass)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods Color colorless State gas Colorless transparent hose outlet pressure cylinders, short Valves open and close look, observe the line of color under natural light Chak and state 3.2 Physical and Chemical Indicators Physical and chemical indicators should be consistent with the provisions of Table 2. Table 2. Physical and chemical indicators Item Index Test Method Butane content, w /% ≥ 97.0 according to GB/T 22024-2008 4.2 methods Water/(mg/kg) ≤ 10 GB/T Karl Fischer Coulomb Law and electric 7376-2008 stipulated Solution, which Karl Fischer Coulomb law Arbitration Law High-boiling residue/(mg/kg) ≤ 5 according to GB/T 4.7 in 7373-2006 Sulfide by testing in Appendix A A.3 The residue acidity by test A.4 in Appendix A

Appendix A

Testing method A.1 General Provisions Unless otherwise indicated in the analysis using only recognized as analytical reagents and GB/T 6682 stipulated three water. The test method used in the standard titration solution, impurities measured by standard solution, preparations and products, not specified in other requirements, according GB/T 601, the provisions of the preparation of GB/T 602 and GB/T 603's. The solution in a solvent which does not indicate by when formulated, refers to an aqueous solution. A.2 Identification Test A.2.1 Determination of Infrared Spectra By infrared absorption spectrophotometry, the sample spectrum and the control spectrum (see Appendix B) Comparison of the two should be basically the same. A.2.2 Determination of vapor pressure According to GB/T 22024-2008 Determination of the method in 4.6. Sample vapor pressure (absolute pressure) 21 ℃ should be 213kPa. A.3 Determination of sulfide The sample cylinder valve is opened, the formation of air appropriate to adjust the flow, do not direct the airflow to the face, the reflective part of the airflow toward the nose, sniffing Its taste. No specific sample sulfide odor is by testing. A.4 Determination of residue acidity The residue was taken after a high boiling point measurement sample, add water to dissolve 10mL, add 2 drops to 3 drops of methyl orange indicator solution (1g/L), no pink or red It is produced by the test.

Appendix B

Butane infrared spectrum Butane infrared spectrum is shown in Figure B.1. Figure B.1 butane infrared spectrum

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 1886.55-2015_English be delivered?

Answer: Upon your order, we will start to translate GB 1886.55-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 1886.55-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB 1886.55-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.