|
US$289.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 15607-2023: Safety code of practice for coating - Safety for electrostatic powder coating process
Status: Valid GB 15607: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 15607-2023 | English | 289 |
Add to Cart
|
3 days [Need to translate]
|
Safety code of practice for coating - Safety for electrostatic powder coating process
| Valid |
GB 15607-2023
|
| GB 15607-2008 | English | 439 |
Add to Cart
|
3 days [Need to translate]
|
Safety code for painting -- Safety for electrostatic powder spraying process
| Obsolete |
GB 15607-2008
|
| GB 15607-1995 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Safety code for painting--Safety for electrostatic powder spraying process
| Obsolete |
GB 15607-1995
|
PDF similar to GB 15607-2023
Basic data | Standard ID | GB 15607-2023 (GB15607-2023) | | Description (Translated English) | Safety code of practice for coating - Safety for electrostatic powder coating process | | Sector / Industry | National Standard | | Classification of Chinese Standard | C65 | | Classification of International Standard | 13.100 | | Word Count Estimation | 14,170 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2024-10-01 | | Older Standard (superseded by this standard) | GB 15607-2008 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB 15607-2023: Safety code of practice for coating - Safety for electrostatic powder coating process
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 13:100
CCSC65
National Standards of People's Republic of China
Replace GB 15607-2008
Safety regulations for painting operations
Powder electrostatic spraying process safety
Published on 2023-12-28
2024-10-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
PrefaceⅠ
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Basic requirements 2
5 Powder spraying equipment and its auxiliary devices 3
6 Ventilation and Purification 4
7 Storage and transportation of powder coating 5
8 Operation and maintenance safety management 5
Appendix A (informative) Classification of hazardous areas for explosive dust environments in various types of powder spraying rooms 7
Appendix B (informative) Calculation method of exhaust air volume (exhaust volume) of electrostatic powder spraying room 9
Appendix C (informative) Equipment inspection and cleaning cycle 10
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document replaces GB 15607-2008 "Safety Regulations for Painting Operations - Safety of Powder Electrostatic Spraying Processes" and is consistent with GB 15607-2008
In comparison, in addition to structural adjustments and editorial changes, the main technical changes are as follows:
a) Changed the scope of the powder spraying area (see 4:1,:2008 version of 4:1);
b) The fire hazard area was deleted and changed to the explosion hazard area (see 4:2, 4:2 in the:2008 edition);
c) The regulations on safety indicators of powder spraying rooms have been changed [see 4:3:2, 4:3:2a) of the:2008 edition];
d) Added regulations for maintenance and cleaning operation ports (see 4:3:5);
e) Delete the factory building requirements for powder spraying operations (see 4:4:2 of the:2008 edition);
f) Interlock control regulations have been changed (see 4:5:3, 4:5:3, 5:1:5, 5:1:6, 5:1:7 of the:2008 edition);
g) Electrical regulations such as explosion protection and grounding have been changed (see 4:7:2, 4:8:1, 4:8:2, 4:8:1, 4:9, and 4:10 of the:2008 edition);
h) The regulations on explosion control have been changed (see 5:1:3, 5:1:3 and 6:4:4 of the:2008 edition);
i) The regulations on spark prevention have been changed (see 5:1:4, 6:4:7 of the:2008 edition);
j) The regulations on recovery devices and purification devices have been changed (see 6:4,:2008 version of 6:4);
k) Changed the name of the “silo” container to powder supply barrel (see 7:2,:2008 version of 7:2);
l) Added relevant requirements for production safety management and emergency plans (see 8:1);
m) Added the classification of hazardous areas for explosive dust environments in various types of powder spraying rooms (see Appendix A);
n) The equipment inspection and cleaning cycle has been changed (see Appendix C, Appendix B of the:2008 version):
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed and managed by the Ministry of Emergency Management of the People's Republic of China:
The previous versions of this document and the documents it replaces are as follows:
---First published as GB 15607-1995 in:1995, first revised in:2008;
---This is the second revision:
Safety regulations for painting operations
Powder electrostatic spraying process safety
1 Scope
This document specifies the basic requirements for the powder electrostatic spraying process, powder spraying equipment and its auxiliary devices, ventilation and purification, and storage of powder coatings:
Basic safety requirements such as storage and transportation, operation and maintenance safety management:
This document applies to powder electrostatic spraying process design and the design, installation, operation, maintenance and management of its equipment: It also applies to powder electrostatic spraying technology:
Acceptance of spraying projects: The electrostatic fluidized bed method, fluidized bed method and other fluidized coating methods shall be implemented with reference:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB 5083 General Principles for Safety and Hygiene Design of Production Equipment
GB 6514 Safety regulations for painting operations: Painting process safety and ventilation
GB 12158 General Guidelines for Preventing Static Electricity Accidents
GB 12367 Safety Regulations for Painting Operations Safety of Electrostatic Spray Painting Process
GB/T 14441 Terminology of safety regulations for painting operations
GB 14443 Safety Regulations for Painting Operations Safety Technical Regulations for Coating Drying Rooms
GB 14444 Safety Regulations for Painting Operations Safety Technical Regulations for Spray Rooms
GB 14773 Safety regulations for painting operations Safety technical conditions for electrostatic spray guns and their auxiliary devices
GB 15577 Dust explosion protection safety regulations
GB 50016 Fire Protection Code for Building Design
GB 50058 Design Code for Electrical Equipment in Explosive Hazardous Environments
GB 50140 Design specifications for configuration of building fire extinguishers
GB 55037 General specifications for building fire protection
3 Terms and definitions
The terms and definitions defined in GB/T 14441 and the following apply to this document:
3:1
Powder feeder
A device that can continuously and evenly supply powder coating for spraying:
3:2
powder recovery unit powderrecoveryunit
It is specially designed to collect uncoated powder, has powder-gas separation function, and can control the concentration of powder-containing air at its entrance to be less than its lower explosion limit:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 15607-2023_English be delivered?Answer: Upon your order, we will start to translate GB 15607-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 15607-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB 15607-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB 15607-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 15607-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|