HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB 15346-2012 English PDF

US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 15346-2012: Chemical reagent -- Packaging and marking
Status: Valid

GB 15346: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 15346-2012English419 Add to Cart 3 days [Need to translate] Chemical reagent -- Packaging and marking Valid GB 15346-2012
GB 15346-1994English479 Add to Cart 4 days [Need to translate] Chemical reagent. Packaging and marking Obsolete GB 15346-1994

PDF similar to GB 15346-2012


Standard similar to GB 15346-2012

GB/T 9741   GB/T 9728   GB/T 9724   GB/Z 43890   GB/T 39630   GB/T 39486   

Basic data

Standard ID GB 15346-2012 (GB15346-2012)
Description (Translated English) Chemical reagent -- Packaging and marking
Sector / Industry National Standard
Classification of Chinese Standard G60
Classification of International Standard 71.040.30
Word Count Estimation 18,114
Older Standard (superseded by this standard) GB 15346-1994
Quoted Standard GB/T 191; GB/T 601; GB/T 603; GB/T 4122.1; GB/T 4857.3; GB/T 4857.5; GB/T 6388; GB/T 6543-2008; GB/T 6582; GB/T 6682; GB/T 9174-2008; GB 12463; GB/T 12464-2002; GB 13690; GB 15258; GB 15603; GB/T 16483; GB 17914; JJF 1070-2005
Regulation (derived from) National Standards Bulletin No. 41 of 2012
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Chinese standard specifies the chemical reagent packaging and marking of the technical requirements, packaging, inspection, storage and transportation. This standard does not apply to MOS reagents, clinical reagents, high purity reagents and fine che

GB 15346-2012: Chemical reagent -- Packaging and marking

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Chemical reagent.Packaging and marking ICS 71.040.30 G60 National Standards of People's Republic of China Replacing GB 15346-1994 Chemicals Packaging and marking Issued on. 2012-12-31 2013-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and symbols 1 Package 4 Category 2 4.1 General Chemicals transport packaging 2 4.2 Dangerous Goods Transport Packaging Chemicals 2 5 Technical requirements for packaging material 2 5.1 2 bottles 5.1.1 Appearance 2 5.1.2 Thermal stability 2 5.1.3 chemical stability 2 5.1.4 Water Resistance 3 5.1.5 Stress 3 5.2 3 plastic bottles 5.3 bags 3 5.4 metal (cans) 3 5.5 ordinary wooden box (nail crate) 3 5.6 corrugated boxes (box) 3 5.7 bubble plastic film 3 5.8 Label Paper 3 3 5.9 and other packing materials 6 Pack of 3 Basic Requirements Package 4 7 7.1 Packaging 4 7.1.1 inner packaging 4 7.1.2 Packaging Unit 6 7.1.3 within the reserved capacity packaging container 6 7.2 Packaging 6 7.2.1 General provisions 6 7.2.2 The packaging container 7 7.3 package 7 7.3.1 General provisions 7 7.3.2 The quantity of packaging assembly 7.3.3 overpack container 8 7.3.4 overpack container sealing method 8 8 8 isolation material 8.1 General provisions 8 Select 8.2 isolation materials 9 9 9 Packing logo 9.1 General provisions 9 9 9.2 Label 9.2.1 product labels 9 9.2.2 Label Dimensions 10 9.2.3 Label Color 10 9.3 packaging logo 10 10 10 Package acceptance 10.1 packaging quality inspection requirements 10 10 10.2 Inspection package 10.3 Inspection of transport packages 11 11 Storage and transport 11 11.1 Storage 11 11.2 Transport 11 Appendix A (normative) Thermal Stability Test Method 12 A.1 Sampling 12 A.2 Instrument 12 A.3 Test procedure 12 Appendix B (normative) Chemical Stability Test Method 13 B.1 Reagents 13 B.2 Determination 13

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard Chapter 5, Chapter 6, Chapter 7, Chapter 8, Chapter 9, Chapter 10 is mandatory, the rest are recommended. This standard replaces GB 15346-1994 "chemical reagent packaging and signs", compared with GB 15346-1994 main changes are as follows. --- Canceled graphics corrugated board (the 1994 version of the 3.6, 3.7); --- Increase the risk of chemicals and chemical agents in general classification regulations (see Chapter 4, 1994 edition, Chapter 4); --- Revised test methods bottles (see Appendix A, Appendix B, 1994 edition of the 5.1.1,5.1.2); --- Modify the number of ordinary wooden box board board (see 55, 1994 version 5.5.); --- Modify the technical requirements of corrugated boxes (see 56, 1994 version 5.6.); --- Modify the product packaging environmental requirements (see 63, 1994 version 6.3.); --- Increase the types of packaging unit (see 712, 1994 edition 7.2.); --- Modify the reserved capacity packaging solid products (see 713, 1994 edition of 7.3.1.); --- Increase should put Safety Data Sheet of the overpack container (see 731, 1994 edition of 7.5.1.); --- Increased product license requirements "quality and safety" sign (see 9.3); --- Modify the tolerance range packaging measurement (see 10.1 1, 1994 edition of 10.1.1). The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee Chemistry Chemicals Branch (SAC/TC63/SC3) centralized. This standard was drafted. Beijing Chemical Plant, Beijing Institute of chemical reagents. The main drafters of this standard. Sun Yanlong, Shao Huimin, Yangjian Ling, Liu Ya chapter. This standard was first published in 1994, this is the first revision. Chemicals Packaging and marking

1 Scope

This standard specifies the technical requirements for chemical reagent packaging and signs, packaging, inspection, storage and transportation. This standard does not apply to MOS reagents, clinical reagents, high purity reagents and fine chemical products, such as packaging.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packaging - Pictorial signs Preparation of GB/T 601 chemical reagent standard titration solution GB/T 603 chemical reagent in test methods - Preparations with GB/T 4122.1 Packaging - Terminology - Part 1. Basic GB/T 4857.3 Basic tests for transport packages - Part 3. Test methods for stacking static load GB/T 4857.5 packaging transport package drop test methods GB/T 6388 transport package shipping mark GB/T 6543-2008 transport packaging corrugated box with a single and double corrugated boxes GB/T 6582 Test methods and classification of glass particles at 98 ℃ water resistance Laboratory use specifications and test methods GB/T 6682 Analysis GB/T 9174-2008 general cargo transport packaging technology GB 12463 transport of dangerous goods packaging technology GB/T 12464-2002 ordinary wooden box GB 13690 chemical classification and hazard communication General GB 15258 rules for preparation of chemical safety labels GB 15603 commonly used hazardous chemicals stored General GB/T 16483 MSDS Content and Order GB 17914 flammable and explosive goods storage and preservation JJF1070-2005 prepackaged goods measured net content inspection rules

3 Terms and symbols

GB/T 4122.1 and define the following terms and definitions apply to this document. 3.1 Packing unit unitofpackage Net content of products within each packaging container loaded. 3.2 Packaging innerpackage Divided without colorant material (NB) Canadian colorant material (NBY) packaging container made, together with the inner plug (mat), cover, seal Outside the mouth and the internal packaging container additional packages such as. black paper, plastic bags and so on. 3.3 Packaged in-between Volume is too small inner containers, before loading the packaging container, press a certain number of combinations charged an intermediate container, and then the intermediate capacity Is charged by a certain number of combinations outer container, this container is called an intermediate in the package. 3.4 Packaging outerpackage Product packaging, in the circulation process mainly serves as protection products, convenient transportation. 3.5 Insulating material divider, separator For container space is divided into several layers or several grid components, such as partitions, lattice panels, its purpose is to and spaced from the buffer contents effect. 3.6 Single corrugated board corrugatedfibreboardofsinglesheettype Processing consists of two layers of corrugated cardboard and a layer made of corrugated cardboard. 3.7 Corrugated paperboard corrugatedfibreboardofdoublesheettype Machined from two containerboard, corrugated layers and layer sandwich made of corrugated cardboard.

4 Packing

4.1 General Chemicals Transport Packaging General Chemical Reagents transport packages shall comply with GB/T 9174-2008 Chapter 3. General requirements, if necessary, should be The provisions of GB/T 9174-2008 Chapter 6 of the performance test accordingly. 4.2 Dangerous Goods Transport Packaging Chemicals According to the provisions of GB 13690 for the classification of hazardous chemicals. Performance test of dangerous goods Chemicals transport packages should be consistent GB 12463 requirements. The technical requirements of the packaging material 5 5.1 bottles 5.1.1 Appearance Correct and smooth, pure color, finish round straight, uniform thickness, no cracks, little bubbles. 5.1.2 Thermal Stability Resistant quench temperature of 35 ℃ without bursting test methods prescribed in Appendix A of execution. 5.1.3 Chemical stability The acidic solution containing methyl red vial, holding 30min at 85 ℃ water bath, light red does not disappear. Test method in Appendix B Regulations. 5.1.4 Water Resistance Execution according to the provisions GB/T 6582's. 5.1.5 Stress White bottle was allowed to purple to pale yellow. Allow yellow bottle was purple to light green. 5.2 plastic bottles Not with the contents from the physical and chemical effects, the thinnest wall thickness not less than 0.5mm. 5.3 plastic bags Not with the contents from the physical and chemical effects, bagging film thickness not less than 0.06mm. 5.4 metal (cans) Made of tinned sheet metal, can protect the lining material, thickness 0.15mm ~ 0.20mm, the seams, the interface does not leak tight. 5.5 ordinary wooden box (nail crate) Wood quality should be consistent with GB/T 12464-2002 5.1 requirements, the thickness is greater than 12mm, box on each side by a three to five pieces of wood group Cheng, box board narrowest width of not less than 30mm, put together and placed in the middle, allowing only one face of each box, wooden box four weeks and down 16 file boxes, boxes Profile width 40mm, thickness 15mm or more, a solid wooden adhesion. Box nails length of 40mm, the number of nail box to box meter wide, with an average per 50mm one, to double parallel cross cloth nail. Outside the box two steel reinforcement, steel strip nails on the wooden box, a nail from the average 50mm Only nail length 40mm, steel Bandwidth 14mm ~ 16mm, thickness of 0.3mm ~ 0.4mm. 5.6 corrugated boxes (box) Single, double corrugated boxes (box) is determined according to the provisions of the kind of GB/T 6543-2008 in Chapter 3. Single, double corrugated boxes (box) base This model and the code is determined according to GB/T 6543-2008 the provisions in Chapter 4. Single, double corrugated boxes (box) of the material, size and bias, quality The required amount and structure should be consistent with the provisions of GB/T 6543-2008 in Chapter 5. Single, double corrugated boxes (box) inspection and testing press GB/T 6543-2008 the provisions of Chapter 6 of the conduct. 5.7 bubble plastic film Specifications. ≤3m2/kg. 5.8 Label Paper Specifications. ≥70g/m2; offset paper or similar paper double performance close. 5.9 Other Packaging Materials Quality requirements according to the relevant national standards. The basic requirements for product packaging 6 Shall be issued by the quality inspection departments qualified products by 6.1 qualified product quality inspection report can be dispensed unilaterally. 6.2 Product packaging operations should be strictly in accordance with the rules of packaging products and packaging specifications. 6.3 Product packaging environment should be kept clean, dry, personnel and environmental protection equipment. The product package should ring at a suitable temperature and humidity Habitat carried out (hygroscopic product Humidity otherwise specified). 6.4 The product package should prevent mutual interference between products, to ensure that does not reduce the quality of the product after the product packaging. Outer packaging containers should be clean, can not be There are product residues. 6.5 Packaging materials and containers should be clean, dry, physical and chemical reactions occur with the contents. 6.6 In addition to the provisions of the standard form of packaging and packaging materials, test and after consultation with the relevant departments, may also be more advanced packaging shape Formula and packaging materials. Within 6.7 containers should be sealed tight can not be undone after the unsealing of the sealing material. Highly toxic and expensive products in the packaging, the packaging and Should have dedicated packaging manufacturer Seals, seals and other sealing material. 6.8 see the light easily oxidized decomposition products should use opaque packaging containers. Opaque containers should be taken to avoid light measures, such as. black bag Paper sleeve black plastic bags.

7 Packaging

7.1 packaging 7.1.1 inner packaging Depending on the nature of the product, according to the provisions in Table 1 to select the appropriate packaging form. Table 1 No. within packaging symbol Colorless and colored 1 wide-mouth glass bottle grinding mouth, ground glass stopper, plastic film bag small bottle Zhakou line, set collodion cap closure NB-1 NBY-1 2 grinding mouth glass bottle wide mouth, ground glass stopper, bottle plastic film bag small wire bag with plastic sleeve thermal plastic cap sealing NB-2 NBY-2 Grinding mouth glass bottle wide mouth, ground glass stopper, plastic film bag small bottle line Zhakou, collodion cap sleeve or plastic heat shrinkable plastic cap, Gypsum hot wax seal NB-3 NBY-3 4 wide-mouth screw-cap bottles, plastic plugs, plastic screw cap, set fire cotton apron seal NB-4 NBY-4 5 wide-mouth screw-cap bottles, plastic plugs, plastic screw cap, apron sets of plastic shrink sealing NB-5 NBY-5 6 wide-mouth screw-cap bottles, plastic plugs, plastic screw cap, hot wax, cotton apron sets fire sealing NB-6 NBY-6 7 wide-mouth screw plastic bottles, plastic plugs, plastic screw cap, set fire cotton apron seal NB-7 NBY-7 8 wide-mouth screw plastic bottles, plastic plugs, plastic screw cap, apron sets of plastic shrink sealing NB-8 NBY-8 9 wide-mouth screw plastic bottles, plastic plugs, plastic screw cap, hot wax, cotton apron sets fire sealing NB-9 NBY-9 10 wide-mouth screw plastic bottles, one of the inner and outer plastic screw cap, set fire cotton apron seal NB-10 NBY-10 11 wide-mouth screw plastic bottles, one of the inner and outer plastic screw cap, apron sets of plastic shrink sealing NB-11 NBY-11 12 wide-mouth screw plastic bottles, one of the inner and outer plastic screw cap, hot wax, cotton apron sets fire sealing NB-12 NBY-12 13 wide-mouth screw anti-theft plastic bottles, plastic plugs, anti-theft plastic screw cap NB-13 NBY-13 14 wide-mouth screw anti-theft plastic bottles, plastic plugs, anti-theft plastic screw cap, hot wax seal NB-14 NBY-14 15 wide-mouth plastic bottle screw theft, internal and external security one plastic screw cap NB-15 NBY-15 16 wide-mouth plastic bottle screw theft, internal and external security one plastic screw cap, hot wax seal NB-16 NBY-16 Table 1 (continued) No. within packaging symbol Colorless and colored 17 small mouth grinding mouth glass bottle, ground glass stopper, plastic film bag small bottle Zhakou line, set collodion cap sealing NB-17 NBY-17 18 small mouth grinding mouth glass bottle, ground glass stopper, bottle plastic film bag small wire bag with plastic sleeve thermal plastic cap sealing NB-18 NBY-18 Grinding small mouth bottles, ground glass stopper, plastic film bag small bottle line Zhakou, collodion cap sleeve or plastic heat shrinkable plastic cap, Gypsum hot wax seal NB-19 NBY-19 20 small screw mouth glass bottles, plastic plugs, plastic screw cap, set fire cotton apron seal NB-20 NBY-20 21 small screw mouth glass bottles, plastic plugs, plastic screw cap, apron sets of plastic shrink sealing NB-21 NBY-21 22 small screw mouth glass bottles, plastic plugs, plastic screw cap, hot wax, plaster sealing NB-22 NBY-22 twenty three Small screw mouth glass bottles, foamed polyethylene film lined PTFE composite seals, plastic screw cap, set fire cotton apron seal NB-23 NBY-23 twenty four Small screw mouth glass bottles, foamed polyethylene film lined PTFE composite seals, plastic screw cap, plastic shrink sleeve Sealing Aprons NB-24 NBY-24 Small screw mouth glass bottles, foamed polyethylene film lined PTFE composite seals, plastic screw cap, hot wax, plaster seal NB-25 NBY-25 Small mouth screw double sealed glass bottles, plastic stopper, aluminum cap (lined with polyethylene foam pad), rolling seal, plastic screw cap, Set fire cotton apron or plastic shrink sealing apron NB-26 NBY-26 27 security screw small mouth glass bottles, plastic plugs, anti-theft plastic screw cap NB-27 NBY-27 28 security screw small mouth glass bottles, polyethylene foam lining PTFE film composite gaskets, anti-theft plastic screw cap NB-28 NBY-28 29 small mouth bottle screw theft, internal and external security one plastic screw cap NB-29 NBY-29 30 security screw small mouth glass bottles, plastic plugs, anti-theft plastic screw cap, hot wax, plaster sealing NB-30 NBY-30 Small mouth bottle screw theft, lined polyethylene foam gasket PTFE composite film, anti-theft plastic screw cap, hot Plaster sealing wax NB-31 NBY-31 32 small mouth bottle screw theft, internal and external security one plastic screw cap, hot wax, plaster sealing NB-32 NBY-32 33 small mouth screw plastic bottles, plastic plugs, plastic screw cap, set fire cotton apron apron or plastic shrink sealing NB-33 NBY-33 34 small plastic bottle screw mouth, inside and outside one of the plastic screw cap, set fire cotton apron apron or plastic shrink sealing NB-34 NBY-34 35 small mouth screw plastic bottles, plastic relief plugs (mat), a perforated plastic screw cap, black plastic coat rubber band cuff NB-35 NBY-35 36 security screw small mouth plastic bottles, plastic plugs, anti-theft plastic screw cap NB-36 NBY-36 37 small mouth plastic bottle screw theft, internal and external security one plastic screw cap NB-37 NBY-37 Theft screw small mouth plastic bottle, relief plastic plugs (mat), anti-theft perforated plastic screw cap, black plastic coat rubber band Zhakou NB-38 NBY-38 39 glass ampoule, hot melt sealing NB-39 NBY-39 40 straight tube glass powder injection, hot melt sealing, installed polystyrene tubes (tube bottom cushion foam pad inside), the plastic screw cap NB-40 NBY-40 41 jaw screw glass bottles, one inside and outside the plastic screw cap, dipped in collodion seal NB-41 NBY-41 42 glass jaw, one inside and outside the plastic cover, dipped in collodion seal NB-42 NBY-42 Table 1 (continued) No. within packaging symbol Colorless and colored 43 die (pipe) system antibiotics glass bottle, rubber stopper, sleeve collodion cap or plastic thermal plastic cap sealing NB-43 NBY-43 44 porcelain, flange rubber stopper, sleeve collodion cap or plastic thermal plastic cap sealing NB-44 NBY-44 Screw insulator, cap natural cork liner polyethylene film, hot wax, plastic screw cap, set fire cotton apron or plastic shrink Sealing Aprons NB-45 NBY-45 46 kraft paper bags, nails, and then a heat-seal plastic bags with NB-46 NBY-46 47 plastic bags, heat sealing NB-47 NBY-47 48 plastic bags, small wire sealing NB-48 NBY-48 49 screw plastic barrels, plastic plugs, plastic screw cap NB-49 NBY-49 50 screw plastic barrels, plastic plugs relief, perforated plastic screw cap NB-50 NBY-50 7.1.2 Packaging Unit Depending on the nature and requirements of the product, according to the provisions of Table 2 to select the appropriate packaging units. In ensuring the storage, transportation safety principles, May adopt appropriate packaging units. Greater density of liquid products or packaging units smaller easily measured, such as. mercury, according to the quality of the measurement. Table 2 The solid product category Packaging Unit/g Liquid Products Packaging Unit/mL 0.5, 1 0.1,0.25,0.5,1 2 5,10,25 5,10,20,25 3 50,100 50,100 4 250,500 250,500 5 1000,2500,5000,25000 1000,2500,3000,5000,25000 7.1.3 within the reserved capacity packaging container Reserve capacity 7.1.3.1 packaging solid products is not less than 10% of the packaging container mouthful capacity. Reserve capacity 7.1.3.2 packaging liquid products from 10% to 20% within the packaging container mouthful capacity. 7.2 Packaging 7.2.1 General provisions Packaging containers of less than 100mL (including 100mL) jars or less than 50mL (including 50mL) small mouth bottle when due The packaging (individually or collectively form); ampoule packaging liquid products, the packaging unit is greater than 50mL (including 50mL), each ampule We should be in a separate packaging. When packaged ampoule sealing end up protective measures should be taken in the lower end of the liner. Biochemical reagents and other particularly vulnerable Deliquescence of the product within the packaging container should be added the right amount of moisture absorption agent. 7.2.2 The packaging container Depending on the nature and form of the choice of packaging products, according to the provisions of Table 3 in selecting the appropriate containers. table 3 Number of containers scope symbol 1 single corrugated box (box) 150mL or less (including 150mL) wide mouth, small mouth glass bottles and plastic bottles ZB-1 Two pairs of corrugated boxes (box) 150mL or less (including 150mL) wide mouth, small mouth bottles ZB-2

3 cardboard boxes

60mL wide-mouth glass bottles, ampoules, bottle jaw, straight tube glass powder injection, mold (Tube) glass manufactured antibiotics ZB-3 4 shockproof plastic bucket bag jacket small glass bottle ZB-4 5 metal (cans) plastic coat small bottles, bins and then loaded absorbent material ZB-5 6 wide mouth (anti-theft) screw type plastic bottle bags ZB-6 7 wide-mouth plastic bottle screw ZB-7 8 of foamed polystyrene box variety of wide mouth, small mouth glass bottles, bottles of mercury ZB-8 7.3 packaging 7.3.1 General provisions a) do ampoule packaging containers, packaging units shall not be greater than 250g or 250mL, net content of not more than each of the outer package 10kg. b) explosives outer package each net content of not more than 10kg. c) In addition to 1000g 1000mL or more packaging units in case of irregularly shaped metal density is too large or too small for the product, The amount of each of the outer package assembled to do the appropriate adjustments. d) In addition to the above, the net content of each of the outer package of other products may not exceed 20kg. e) Each outer package volume of not less than 0.02m3, except for large boxed and density of the product. f) should be placed within the outer container packing list (including the job number, name and address, phone and zip code, etc.) or product certification, chemical Materials Safety Data Sheet (SDS should be prepared in line with GB/T 16483 requirements). 7.3.2 the amount of packaging assembly Depending on the product's packaging unit, in Table 4 to select the appropriate amount of the packaging assembly. Table 4 No. Packing unit volume assembly The solid product within liquid products Packing net weight Volume g mL bottles, barrels, bags kg L 1500050002 ~ 410 ~ 2010 ~ 20 225002500 (3000) 410 ~ 2010 ~ 12 31000100010 ~ 2010 ~ 2010 ~ 20 Table 4 (Continued) No. Packing unit volume assembly The solid product within liquid products Packing net weight Volume g mL bottles, barrels, bags kg L 450,050,010 ~ 205 ~ 205 ~ 10 5250250205 ~ 105 610010020 152 ~ 802 ~ 8 ~ 7,505,060 ~ 1003 ~ 103 ~ 5 8252560 100 ~ 8 ~ 1.5 2.5 ~ 1.5 91010100 2001 ~ 61 ~ 2 ~ 1055 not specified - - 11 < 1 < 1 is not specified - - 7.3.3 overpack container Depending on the nature and the choice of packaging containers and the amount of product assembly, according to Table 5 to select the appropriate packaging containers. table 5 No. overpack container Scope Symbol 1 ordinary wooden box (nail crate) Wide mouth, small mouth glass bottles and plastic bottles, ampoules, glass powder injection straight pipe jaws bottles, mold (pipe) System antibiotics bottles, porcelain, plastic bags, plastic buckets WB-1 Two pairs of corrugated boxes jars, glass and plastic bottles WB-2 Three pairs of corrugated boxes jars, glass and plastic bottles, plastic bags and WB-3 7.3.4 overpack container sealing manner Overpack container sealing method can select one of the following ways. a) ordinary wooden box with a length of 40mm round nails, nail sealed cover. Strips overlapped on the positive, nail margin shall not exceed 80mm, but on each side of me not We are less than three nails. b) 10 bottled counterparts corrugated boxes sealed with tape bottom of the box, closed the lid or bottom of the box nails, cover with sealing tape, and then cross the polypropylene strap Beat two. Socket box bottom box sealing tape can not, cover only polypropylene straps cross hit two or sealed with tape bottom of the box, the lid, Without tying. c) 20 bottled and packaged in corrugated boxes with tape sealing the bottom, or bottom cover screw seal, cover with sealing tape, and then polypropylene Ene strap aspect each hit two was "well" shape.

8 spacer material

8.1 General Provisions In addition to special requirements, the packaging container is plastic bottles, plastic bags and plastic barrels, at the time of load plain wooden box, usually bottles (bags, barrels) without interval between From the material, the su...

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 15346-2012_English be delivered?

Answer: Upon your order, we will start to translate GB 15346-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 15346-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB 15346-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB 15346-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 15346-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.