|
US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 15208.4-2018: Micro-dose X-ray security inspection system -- Part 4: Human body security inspection system
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 15208.4-2018 | English | 599 |
Add to Cart
|
5 days [Need to translate]
|
Micro-dose X-ray security inspection system -- Part 4: Human body security inspection system
| Valid |
GB 15208.4-2018
|
PDF similar to GB 15208.4-2018
Basic data | Standard ID | GB 15208.4-2018 (GB15208.4-2018) | | Description (Translated English) | Micro-dose X-ray security inspection system -- Part 4: Human body security inspection system | | Sector / Industry | National Standard | | Classification of Chinese Standard | A91 | | Classification of International Standard | 13.310 | | Word Count Estimation | 30,381 | | Date of Issue | 2018-11-19 | | Date of Implementation | 2019-12-01 | | Regulation (derived from) | National Standard Announcement No. 15 of 2018 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB 15208.4-2018: Micro-dose X-ray security inspection system -- Part 4: Human body security inspection system
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Micro-dose X-ray security inspection system--Part 4. Human body security inspection system
ICS 13.310
A91
National Standards of People's Republic of China
Micro-dose X-ray safety inspection equipment
Part 4. Human safety inspection equipment
Part 4. Humanbodysecurityinspectionsystem
Published on.2018-11-19
2019-12-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Equipment Category 2
5 General technical requirements 3
6 Test method 5
7 Inspection rules 8
8 Packaging, labeling, storage and transportation 9
9 random technical documents 9
Appendix A (informative) Test Evaluation Record Table 10
Appendix B (Normative Appendix) Test Body 11
Appendix C (Normative) Requirements for Dose Detection Instruments and Test Scatterers 22
Appendix D (Normative Appendix) Test Method for Dose of Subjects to be Inspected 23
Appendix E (Normative) Radiation workplace radiation level test scatterers and test methods 25
Reference 27
Foreword
All technical content in this section is mandatory.
GB 15208 "Micro Dose X-ray Safety Inspection Equipment" is divided into the following five parts.
--- Part 1. General technical requirements;
--- Part 2. Transmissive bag security inspection equipment;
--- Part 3. Transmissive cargo safety inspection equipment;
--- Part 4. Human body safety inspection equipment;
--- Part 5. Backscattering items safety inspection equipment.
This part is the fourth part of GB 15208.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part is proposed and managed by the Ministry of Public Security of the People's Republic of China.
This section drafted by. Ministry of Public Security First Institute, Beijing Zhongduan Anmin Analysis Technology Co., Ltd., Tongfang Weishi Technology Co., Ltd.
Division, National Security and Alarm System Product Quality Supervision and Inspection Center (Beijing), National Security and Alarm System Product Quality Supervision and Inspection
Xin (Shanghai), Shenzhen Institute of Metrology and Quality Inspection, Shenzhen Liming Qingqing Image Technology Co., Ltd.
The main drafters of this section. Yang Xiaoyue, Chen Xueliang, Zhao Lei, Xing Yu, Zhao Nai, Lu Peng, Liu Caixia, Zhou Yingchun, Shi Zhibo, Deng Yanli,
Tao Lei.
Micro-dose X-ray safety inspection equipment
Part 4. Human safety inspection equipment
1 Scope
This part of GB 15208 specifies the classification, general technical requirements, test methods, inspection rules, packaging, and marking of human safety inspection equipment.
Awareness, storage and transportation, and random technical documentation.
This section applies to the design, manufacture, assembly, acceptance and use of various human safety inspection equipment.
This section does not apply to X-ray safety inspection equipment for computed tomography (CT).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 308.1-2013 Rolling ball - Part 1. Steel ball
GB 15208.1-2018 Micro-dose X-ray safety inspection equipment - Part 1. General technical requirements
GB 15208.2-2018 Micro-dose X-ray safety inspection equipment - Part 2
3 Terms and definitions
The following terms and definitions defined in GB 15208.1-2018 and GB 15208.2-2018 apply to this document.
3.1
Human body background material detection force materialdetectiononhumanbody
The ability of the device to resolve the thickness of high density polyethylene wafers in the context of high density polyethylene.
Note. Generally, it is expressed by the thickness (mm) of a high-density polyethylene wafer.
3.2
Air background material detection force materialdetectioninair
The ability of the device to resolve the thickness of the comb test object in the air background.
Note. Generally, the tooth thickness (mm) of the comb test object is expressed.
3.3
Body line resolution wiredetectiononhumanbody
The device resolves the ability of a single solid copper coil wire diameter in the context of high density polyethylene.
Note. Generally indicated by the nominal diameter (mm) of the wire.
3.4
Spatial resolution of the spatial resolutiononhumanbody
The ability of the device to resolve the diameter of steel balls in the context of high density polyethylene.
Note. Generally, it is expressed by the diameter (mm) of the steel ball.
3.5
Micro-dose X-ray human body safety inspection equipment micro-doseX-rayhumanbodysecurityinspectionsystem
A micro-dose X-ray safety inspection device for inspecting humans carrying dangerous goods or contraband.
3.6
Transmissive micro-dose X-ray human body safety inspection equipment transmissionmicro-doseX-rayhumanbodysecurityin-
Spectionsystem
A transmissive micro-dose X-ray safety inspection device for inspecting humans carrying dangerous goods and contraband.
3.7
Backscatter X-ray backscatterX-ray
Scattered X-rays greater than 90° with respect to incident X-rays.
3.8
Backscatter micro-dose X-ray human body safety inspection equipment backscattermicro-doseX-rayhumanbodysecurityin-
Spectionsystem
A backscattering micro-dose X-ray human body safety inspection device for inspecting humans carrying dangerous goods and contraband.
3.9
Open micro-dose X-ray human body safety inspection equipment unshieldedmicro-doseX-rayhumanbodysecurityinspec-
Tionsystem
An open micro-dose X-ray safety inspection device for inspecting humans carrying dangerous goods and contraband.
3.10
Closed micro-dose X-ray human body safety inspection equipment shieldedmicro-doseX-rayhumanbodysecurity
Inspection system
A closed micro-dose X-ray safety inspection device for inspecting humans carrying dangerous goods or contraband.
3.11
General mode generalmode
A working mode for initial safety checks on certain groups of people.
3.12
Special mode specialmode
A mode of work used to perform security checks on specific populations.
3.13
Radiation workplace radiationworkplace
The collective name of the control area and the supervision area.
3.14
Scan scan
The operation of obtaining an image by X-ray sweeping through the human body.
3.15
Check screening
The sum of all the scans required to display the results of imaging the various faces of the human body.
3.16
Reference location
The location where the test body is required to be placed when testing device image metrics.
3.17
Single check time timeperinspection
The time from when the operator issues an instruction until the image is displayed.
4 Equipment classification
4.1 Micro-dose X-ray human body safety inspection equipment (hereinafter referred to as equipment) is divided into. according to technical characteristics.
a) transmissive equipment;
b) backscattering equipment;
c) Transmissive, backscatter combined equipment.
4.2 Equipment is divided according to material resolution.
a) single energy spectrum equipment;
b) Multi-spectral spectrum equipment.
4.3 Equipment is classified according to the type of protection.
a) open equipment;
b) Closed equipment.
5 General technical requirements
5.1 Performance Specifications
5.1.1 Human body background material detection force
It should be able to distinguish the thickness of the thinnest wafer by 5mm.
5.1.2 Air background material detection force
Should be able to distinguish the minimum high-density polyethylene sawtooth thickness of 3mm; should be able to distinguish the minimum stainless steel (SST-304) sawtooth thickness is
1.6mm.
5.1.3 Body line resolution
It should be able to distinguish the minimum single solid copper coil with a wire diameter of 0.511mm.
5.1.4 Volume resolution
It should be able to distinguish the smallest steel ball with a diameter of 6mm.
5.1.5 Organic matter resolution (for transmissive multi-energy spectrum equipment)
It should be able to distinguish the organic ladder with a thickness of 1mm~120mm and give orange with different saturation.
5.1.6 Mixture resolution (for transmissive multi-energy spectrum equipment)
It should be able to distinguish the aluminum step of the alloy with a thickness of 1mm~60mm and give green with different saturation.
5.1.7 Grayscale resolution (for transmissive single-energy spectrum equipment)
It should be able to distinguish the aluminum step of the alloy with a thickness of 1mm~60mm and a thickness difference of not less than 1mm.
5.1.8 Inorganic resolution (for transmissive multi-energy spectrum equipment)
It should be able to distinguish steel steps with a thickness of 0.2mm~14mm and give blue with different saturation.
5.1.9 Single inspection time
Should be less than 15s.
5.2 Radiation and environmental safety indicators
5.2.1 Dose of the subject
The surrounding dose equivalent H*(10) or personal dose equivalent Hp(10) of the position of the test subject caused by a general mode check shall be
Not more than 0.5μSv.
The surrounding dose equivalent H*(10) or individual dose equivalent Hp(10) of the position of the test object caused by a special inspection mode check shall be
No more than 5μSv.
5.2.2 Radiation level of radiation workplace
When the equipment is in operation, a control zone should be placed around it, and the ambient dose equivalent of the control zone boundary should not exceed 20 μSv per hour.
When the equipment is in operation, a supervision area should be set around it, and the public and the personnel to be inspected are prohibited from entering the area. Accumulated hourly boundaries
The surrounding dose equivalent should not exceed 2.5 μSv.
The position of the operator, the cumulative daily dose equivalent per hour should not exceed 0.5 μSv.
When the equipment is installed and commissioned, it should be tested at the workplace radiation dose level before being put into operation, according to different regions and locations.
The dose level requires that the control area, supervision area, and equipment operator position be drawn.
5.2.3 Equipment noise
Should comply with the provisions of 5.2.3 of GB 15208.1-2018.
5.3 Operating environment
5.3.1 Working environment conditions
Should comply with the provisions of 5.3.1 of GB 15208.1-2018.
5.3.2 Power Adaptability
Should comply with the provisions of 5.3.2 of GB 15208.1-2018.
5.4 Security performance
It shall comply with the provisions of 5.4 of GB 15208.1-2018 [except single-energy spectrum equipment 5.4.1g)].
5.5 Mechanical structure
Should comply with the provisions of 5.5 of GB 15208.1-2018.
5.6 Electromagnetic compatibility
Should comply with the provisions of 5.6 of GB 15208.1-2018.
5.7 Anti-shock
Should comply with the provisions of 5.7 of GB 15208.1-2018.
5.8 Anti-mechanical danger
Should comply with the provisions of 5.8 of GB 15208.1-2018.
5.9 Preventing the spread of flame
Should comply with the provisions of 5.9 of GB 15208.1-2018.
5.10 Temperature limits and heat resistance
Should comply with the provisions of 5.10 of GB 15208.1-2018.
5.11 Environmental adaptability
Should comply with the provisions of 5.11 of GB 15208.1-2018.
5.12 Functional requirements
5.12.1 Human-computer interaction function
Should comply with the provisions of 5.12.1 of GB 15208.1-2018.
5.12.2 Image display function
Should comply with the provisions of 5.12.2a) of GB 15208.1-2018.
5.12.3 Image Processing Function
Should comply with the provisions of 5.12.3 of GB 15208.1-2018.
5.12.4 Device Diagnostics
Should comply with the provisions of 5.12.5 of GB 15208.1-2018.
6 Test methods
6.1 Environmental requirements
Should comply with the provisions of 6.1 of GB 15208.1-2018, and record the ambient temperature, relative humidity and atmospheric pressure (see Appendix A
Table A.1).
6.2 Main instruments and tools for testing
Should comply with the provisions of 6.2.3 and 6.2.4 of GB 15208.1-2018.
Test body. See Appendix B.
Main instruments and tools for dose testing of the tested object. See C.1 in Appendix C.
Main instruments and tools for radiation level dose testing in radiation workplaces. see C.2.
Radiation level test scatterers for radiation workplaces. see C.3.
6.3 Performance Indicator Test
6.3.1 Overview
The equipment should scan the object to be inspected in a standard operating procedure and working mode. Hardware settings, software settings, and image processing methods during testing
Parameters such as the dose of the subject to be tested should be recorded in the test documentation (see Table A.2).
When testing the device image index, the test body should be placed in the reference position, as shown in Figure 1. The reference position is in the center of the detection area and stands at a distance
The height of the platform is 1 m, and the distance between the test body and the beam exit of the X-ray generating device can be reasonably selected within the detection area.
On the test body, the test card A face is facing the X-ray generating device, the B surface is close to the phantom (see Appendix B), and the X-ray passes through the test card and the body in turn.
mold. Image processing is allowed to achieve the best evaluation results during device testing.
Figure 1 Image indicator test reference position
6.3.2 Human body background material detection test
The human body background material detection test card and the phantom are combined into a test body and placed at a reference position to start and complete the scan. Judging knot
Whether it meets the requirements of 5.1.1.
6.3.3 Air background material detection force test
The air background material detection force test card and the phantom are combined into a test body and placed in a reference position to start and complete the scan. Judging knot
Whether it meets the requirements of 5.1.2.
6.3.4 Body line resolution test
The body line resolution test card and the phantom are combined into a test body and placed in a reference position to start and complete the scan. Whether the result of the judgment is
Meet the requirements of 5.1.3.
6.3.5 Volumetric spatial resolution test
Combine the body space resolution test card and the phantom into the test body and place it in the reference position to start and complete the scan. Whether the result of the judgment
Meet the requirements of 5.1.4.
6.3.6 Organic matter discrimination test
Put the test body B in Appendix A of GB 15208.2-2018 in the reference position, start and complete the scan, and visually test the test body B on the display.
The X-ray image of the test card 5 and the test card 6 determines whether the result meets the requirements of 5.1.5.
Note. If the adjacent steps of the organic ladder sample can be distinguished and can give orange to different saturations, the device can be considered to be distinguishable.
6.3.7 Mixture/Grayscale Resolution Test
Place the test body B in Appendix A of GB 15208.2-2018 in the reference position, start and complete the scan, and visually test on the display.
The X-ray image of the test card 7 in the body B determines whether the result meets the requirements of 5.1.6 and 5.1.7.
Note. For transmissive single-energy spectroscopy equipment, equipment can be considered if the adjacent steps of the alloy aluminum step sample can be distinguished and can be given different gradations.
Can distinguish; for transmissive multi-energy spectrum equipment, if the adjacent steps of the alloy aluminum step sample can be distinguished and can give different saturation green,
Then the device can be considered to be distinguishable.
6.3.8 Inorganic resolution test
Place the test body B in Appendix A of GB 15208.2-2018 in the reference position, start and complete the scan, and visually test on the display.
The X-ray image of the test card 8 in the body B determines whether the result meets the requirements of 5.1.8.
Note. If the adjacent steps of the steel step sample can be distinguished and can be given a different shade of blue, the device can be considered to be distinguishable.
6.3.9 Single inspection time test
When testing the test body, use the stopwatch to record the time from the operator's command to the completion of the test, and determine whether the result meets the requirements of 5.1.9.
Claim.
6.4 Radiation and environmental indicators test
6.4.1 Dose test of the tested subject
Test the equipment according to the test method specified in D.2 of Appendix D, and determine whether the result meets the requirements of 5.2.1.
6.4.2 Radiation workplace radiation level test
Test the equipment according to the test method specified in E.2 of Appendix E, and determine whether the result meets the requirements of 5.2.2.
6.4.3 Equipment noise test
Test the equipment according to the test method specified in 6.3.3 of GB 15208.1-2018, and determine whether the result meets the requirements of 5.2.3.
6.5 Power supply range test
Test the equipment according to the test method specified in 6.4 of GB 15208.1-2018, and determine whether the result meets the requirements of 5.3.2.
6.6 Safety performance test
Test the equipment according to the test method specified in 6.5 of GB 15208.1-2018, and determine whether the result meets the requirements of 5.4.
6.7 Mechanical structure test
Test the equipment according to the test method specified in 6.6 of GB 15208.1-2018, and determine whether the result meets the requirements of 5.5.
6.8 Electromagnetic Compatibility Test
Test the equipment according to the test method specified in 6.7 of GB 15208.1-2018, and determine whether the result meets the requirements of 5.6.
6.9 Anti-shock test
Test the equipment according to the test method specified in 6.8 of GB 15208.1-2018, and judge whether the result meets the requirements of 5.7.
6.10 Anti-mechanical danger test
Test the equipment according to the test method specified in 6.9 of GB 15208.1-2018, and determine whether the result meets the requirements of 5.8.
6.11 Prevention of flame spread test
The equipment shall be tested according to the test method specified in 6.10 of GB 15208.1-2018, and the result is judged to meet the requirements of 5.9.
6.12 Equipment temperature limits and heat resistance test
Test the equipment according to the test method specified in 6.11 of GB 15208.1-2018, and determine whether the result meets the requirements of 5.10.
6.13 Environmental Adaptability Test
Test the equipment according to the test method specified in 6.12 of GB 15208.1-2018, and determine whether the result meets the requirements of 5.11.
6.14 Functional requirements
Follow the manufacturer's product instructions to determine if the results meet the requirements of 5.12.
7 Inspection rules
7.1 Inspection classification
Should comply with the provisions of 7.1 of GB 15208.1-2018.
7.2 Type inspection
Should comply with the provisions of 7.2 of GB 15208.1-2018.
7.3 Factory inspection
Should comply with the provisions of 7.3 of GB 15208.1-2018.
7.4 Inspection items
The inspection items are shown in Table 1.
Table 1 Inspection item list
Serial number project technical requirements test method type inspection factory inspection
1 Human body background material detection force 5.1.1 6.3.2 ● ●
2 Air background material detection force 5.1.2 6.3.3 ● ●
3 Body line resolution 5.1.3 6.3.4 ● ●
4 Volumetric spatial resolution 5.1.4 6.3.5 ● ●
5 Organic matter discrimination 5.1.5 6.3.6 ● ●
6 Mixture resolution 5.1.6 6.3.7 ● ●
7 Grayscale resolution 5.1.7 6.3.7 ● ●
8 Inorganic resolution 5.1.8 6.3.8 ● ●
9 Single inspection time 5.1.9 6.3.9 ● ●
10 dose of the subject 5.2.1 6.4.1 ● ●
11 Radiation level of radiation workplace 5.2.2 6.4.2 ● ●
12 Equipment noise 5.2.3 6.4.3 ● -
13 Power Adaptability 5.3.2 6.5 ● -
Table 1 (continued)
Serial number project technical requirements test method type inspection factory inspection
14 Safety features 5.4 6.6 ● ●
15 Visual inspection 5.5 6.7 ● ●
16 Enclosure rating 5.5 6.7 ● -
17 Electromagnetic compatibility 5.6 6.8 ● -
18 Protection against electric shock 5.7 6.9 ● -
19 Anti-mechanical hazard 5.8 6.10 ● -
20 Prevent flame spread 5.9 6.11 ● -
21 Equipment temperature limit and heat resistance 5.10 6.12 ● -
22 Environmental Adaptability 5.11 6.13 ● -
23 Functional requirements 5.12 6.14 ● ●a
a Only 5.12.1a), 5.12.2 and 5.12.5 in GB 15208.1-2018 are required.
7.5 Evaluation of test images during type inspection
Should comply with the provisions of 7.5 of GB 15208.1-2018.
7.6 Inspection
Should comply with the provisions of 7.6 of GB 15208.1-2018.
7.7 Decision rules
Should comply with the provisions of 7.7 of GB 15208.1-2018.
8 Packaging, marking, storage and transportation
Should comply with the provisions of Chapter 8 of GB 15208.1-2018.
9 random technical documents
Should comply with the provisions of Chapter 9 of GB 15208.1-2018.
Appendix A
(informative appendix)
Test evaluation record
A.1 Human body conditions for examination
The human condition environmental condition record table is shown in Table A.1.
Table A.1 Human body examination environmental condition record
Tester. Location. Date/Time.
Equipment manufacturer. Equipment model. Equipment serial number.
Ambient temperature/°C. Relative humidity. Atmospheric pressure/kPa.
Model number.
Test card number.
Other test conditions.
Checked object position
The object to be inspected is at the reference location.
The distance of the object to be inspected from the X-ray exit.
The object being inspected is not in the reference position.
Side position. Reference position left. Reference position to the right.
height.
Test other objects in the field and their distance and location.
A.2 Image indicator test report
The image indicator test report is shown in Table A.2.
Table A.2 Image Indicator Test Report
The image processing method used by the test item and the setting of the minimum index test result are passed (√)
Human body background material detection force/mm 5mm
Air background material detection force/mm
HDPE 3mm
Stainless steel 1.6mm
Body line resolution/mm 0.51mm
Volume resolution/mm 6mm
Software settings (software version, etc.).
Hardware settings (such as tube voltage, tube current, scan speed, etc.).
annex.
Precautions.
Appendix B
(normative appendix)
Test body
B.1 Test body composition
The test body consists of a phantom and a test card, see Figure B.1. The combined size is 300mm × 300mm × 240mm (width × height ×
Thick), used to simulate the human body to complete various tests.
The phantom consists of four high-density polyethylene (HDPE) plates measuring 300mm ×
300mm (width x height), thickness 50mm, 55mm, 55mm and 55mm. The phantoms need to be combined, and the combined size is 300mm ×
300mm × 215mm (width × height × thickness).
There are five test cards. Air background material detection force test card and two human body background material detection force test card by backboard and test object
The composition, the body line resolution test card and the body space resolution test card are composed of a back plate, a test object and a cover plate. The surface of the test object on the test card is
On the A side, the back side of the test object is the B side.
The phantom, test card backboard and test card cover material are HDPE with a density of 0.95g/cm3±0.05g/cm3.
The length of the test body is in millimeters (mm), the tolerance is ±0.3mm when the value is an integer or a decimal, and the tolerance is two decimal places.
It is ±0.15mm; the angular tolerance is ±0.5°.
Description.
1---Air background material detection force test card, see Figure B.2 ~ Figure B.7, the number is 1;
2---human body background material detection test card 1, see Figure B.8, the number is 1;
3---Human background material detection force test card 2, see Figure B.9, the number is 1;
4---body line resolution test card, see Figure B.10 ~ Figure B.12, the number is 1;
5---body space resolution test card, see Figure B.13 ~ Figure B.16, the number is 1;
6--- phantom (thickness 50mm), see Figure B.17, the quantity is 1;
7--- phantom (thickness 55mm), see Figure B.18, the number is 3.
Figure B.1 Test body composition
B.2 Air background material detection force test card
The test card consists of a backing plate and two comb-like test materials of different materials and thicknesses, see Figure B.2~B.7. Comb test object tooth length
25mm, tooth width 25mm, tooth spacing 25mm, HDPE comb test object tooth thickness is 1.2mm, 2.0mm, 3.0mm,
The tooth thicknesses of the 5.0 mm and 7.0 mm, stainless steel (SST-304) comb test articles were 0.8 mm, 1.6 mm, and 3.2 mm, res...
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 15208.4-2018_English be delivered?Answer: Upon your order, we will start to translate GB 15208.4-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 15208.4-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB 15208.4-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|