|
US$169.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GA/T 536.2-2005: Grading and test method on fire hazard for flammable and explosive hazmats -- Part 2: Test method of grading for flammable solids
Status: Obsolete
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GA/T 536.2-2005 | English | 169 |
Add to Cart
|
2 days [Need to translate]
|
Grading and test method on fire hazard for flammable and explosive hazmats -- Part 2: Test method of grading for flammable solids
| Obsolete |
GA/T 536.2-2005
|
PDF similar to GA/T 536.2-2005
Standard similar to GA/T 536.2-2005 GB 13495.1 GB 8624 GB/T 8626 GA/T 974.4 Basic data | Standard ID | GA/T 536.2-2005 (GA/T536.2-2005) | | Description (Translated English) | Grading and test method on fire hazard for flammable and explosive hazmats -- Part 2: Test method of grading for flammable solids | | Sector / Industry | Public Security (Police) Industry Standard (Recommended) | | Classification of Chinese Standard | C80 | | Classification of International Standard | 13.220.01 | | Word Count Estimation | 4,487 | | Date of Issue | 2005-03-17 | | Date of Implementation | 2005-10-01 | | Issuing agency(ies) | Ministry of Public Security of the People Republic of China | | Summary | This standard specifies the classification test method for flammable solids. This standard applies to flammable solids where the classification of fire hazards is to be determined. This standard does not apply to self-reactive substances and solid desensitized explosives. | GA/T 536.2-2005: Grading and test method on fire hazard for flammable and explosive hazmats -- Part 2: Test method of grading for flammable solids
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Grading and test method on fire hazard for flammable and explosive hazmats -- Part 2. Test method of grading for flammable solids
ICS 13.220.01
C80
People's Republic of China Public Safety Industry Standard
Flammable and explosive dangerous goods
Fire risk classification and test method
Part 2. flammable solids classification test method
Released on.2005-03-17
Implemented.2005-10-01
Ministry of Public Security
Foreword
GA/T 536 "Classification and Test Methods for Fire Hazard of Flammable and Explosive Dangerous Goods" is divided into 6 parts.
--- Part 1. Classification of fire hazards for inflammable and explosive dangerous goods;
---Part 2. Test method for flammable solids classification;
---Part 3. Test methods for the classification of substances that are susceptible to spontaneous combustion;
---Part 4. Test method for grading of flammable substances in contact with water;
---Part 5. Method for the classification of solid oxidizing substances;
--- Part 6. Method for the classification of liquid oxidizing substances.
This part is the second part of GA/T 536.
This section mainly refers to the United Nations Committee of Experts on the Transport of Dangerous Goods, Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria.
(Revised 3) The technical content of Part III 33.2.1 is formulated, and its structure and writing rules are in accordance with GB/T 1.1-2000.
Provisions.
This part was proposed by the Fire Department of the Ministry of Public Security of the People's Republic
This part is under the jurisdiction of the First Technical Committee of the National Fire Protection Standardization Technical Committee (SAC/TC113/SC1).
This section is responsible for drafting the unit. Tianjin Fire Research Institute of the Ministry of Public Security.
Participated in the drafting of this section. Hebei Provincial Public Security Department Fire Bureau.
The main drafters of this section. Li Jin, Wang Gang, Sheng Wenke, Gao Qiang, Zheng Duanwen.
Flammable and explosive dangerous goods
Fire risk classification and test method
Part 2. flammable solids classification test method
1 Scope
This part of GA/T 536 specifies the classification test method for flammable solids.
This section applies to flammable solids that require a fire hazard classification.
This section does not apply to self-reactive substances and solid desensitized explosives.
2 Instruments and apparatus
a) Make molds and accessories for stacking test samples, see Figure 1;
b) ignition source, the fuel is usually butane, and gas or natural gas can also be used;
c) Inorganic insulation board (impermeable, thermal conductivity at 0 ° C is not higher than 0.23W/m · K);
d) stopwatch (minimum division is not more than 0.1s);
e) ruler (minimum division is not more than 1mm);
f) Dropper.
3 test conditions
The temperature is (20 ± 5) ° C and the humidity is (50 ± 10) % RH.
4 test steps
4.1 Preliminary screening test
4.1.1 Loosely load the test sample in the form of granules, powder or paste into the mold and free the mold from a height of 20 mm from the hard surface.
Next, after three times of piercing, the mold is turned over, and the test sample is buckled on the inorganic heat insulation board to make a 250 mm wide, 20 mm wide, and 10 mm high cross section.
It is a stack of triangles.
4.1.2 Burn the end of the test sample with the flame of the ignition source (flame diameter 5mm ~ 8mm) until it ignites.
a) If the test sample stack is not ignited within 2 min (metal or metal alloy powder for 20 min) test time, or after ignition
If the flame spreads along the stack < 200mm, the substance is not a flammable solid;
b) If the test sample stack is ignited within 2 min (metal or metal alloy powder in 20 min) test time, and the flame along
If the stacking distance is ≥200mm, the following burning rate test should be continued.
4.2 Burning rate test
4.2.1 Reprocess a stack of test specimens through the preliminary screening test on the inorganic insulation board (method same as 4.1.1).
4.2.2 Make a groove of 3m deep and 5mm in diameter on the ridge at 210mm~220mm, and add 1mL of humectant dropwise.
Make sure that the cross section of the stack is completely wet (this part of the test does not apply to metal or metal alloy powders).
Note. Wetting agents do not contain flammable solvents, and active substances in humectants should not exceed 1%.
4.2.3 ignite one end of the stack with the above flame, and measure the flame to spread 100mm after the flame spreads along the stack to 80mm.
The time required and record the time the flame passes through the wet section.
4.2.4 For metal or metal alloy powders, record the time that the flame spreads to the full length of the stack after ignition.
4.2.5 Repeat the test five times and take the average of the six tests as the burning rate of the test sample.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GA/T 536.2-2005_English be delivered?Answer: Upon your order, we will start to translate GA/T 536.2-2005_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GA/T 536.2-2005_English with my colleagues?Answer: Yes. The purchased PDF of GA/T 536.2-2005_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|