| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GA 1061-2013 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Requirements for fire products consistency inspection
| Obsolete |
GA 1061-2013
|
PDF similar to GA 1061-2013
Standard similar to GA 1061-2013 GB 13495.1 GB 8624 GB/T 8626 GA/T 974.4 Basic data | Standard ID | GA 1061-2013 (GA1061-2013) | | Description (Translated English) | Requirements for fire products consistency inspection | | Sector / Industry | Public Security (Police) Industry Standard | | Classification of Chinese Standard | C80 | | Classification of International Standard | 13.220.01 | | Word Count Estimation | 127,134 | | Date of Issue | 2013-03-26 | | Date of Implementation | 2013-03-26 | | Quoted Standard | GB/T 19000; GA 1035 | | Regulation (derived from) | Fire products consistency check requirements industry standard publication; industry standard filing notice 2014 No. 4 (total 172) | | Issuing agency(ies) | Ministry of Public Security | | Summary | This standard specifies the terms and definitions, general rules, methods, judgments and treatments for consistency checks of fire protection products. This standard applies to fire product certification initial factory inspection and post-certification s | GA 1061-2013: Requirements for fire products consistency inspection---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Requirements for fire products consistency inspection
ICS 13.220.01
C80
People's Republic of China Public Security Industry Standards
Fire inspection requirements for product consistency
Issued on. 2013-03-26
2013-03-26 implementation
People's Republic of China Ministry of Public Security
Table of Contents
Preface Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 1 General
Method 3 5
6 determines 4
7 Treatment 4
Appendix A (normative) Fire product consistency check record 5
Appendix B (normative) Fire control product consistency inspection record 122
Foreword
The standard 4.3 to 4.8 and Chapter 6, Chapter 7 are mandatory, the rest are recommended.
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard was proposed by the Ministry of Public Security Fire Department.
This standard by the National Standardization Technical Committee fixed fire extinguishing system Technical Committee (SAC/TC113/SC2) centralized.
This standard is drafted by. Ministry of Public Security Fire Product Conformity Assessment Center.
Participated in the drafting of this standard. Tianjin Fire Research Institute of Ministry of Public Security, Ministry of Public Security Shanghai Fire Research Institute, Shenyang Fire Research Institute Ministry of Public Security, the public
Abe Sichuan Fire Research Institute, Xi'an System Sensor Electronics Co., Ltd., Shanghai Golden Shield Fire Safety Equipment Co., Ltd., Foshan City, Guangxi Fire Real
Co., Ltd., Shenyang Fire electronic equipment factory.
The main drafters of this standard. East Jing Fei, Yangzhen Ming, Qu Li, Jinyi heavy, Lu Xi, Liu Lianxi, Yu Wei, Liu Cheng, Feng Wei, Zhang Decheng, Zhangshao Yu,
Chengdao Bin, Wang, Lee Lihong, Liu Yuheng, Shen Jian Min, Li Ning, Zhang Lisheng, Wang Yane, Kang Weidong, Hu Ming group, Fu Ping, Li Yi, Bai Diantao,
Zhou Xiangyi, yellow legion.
This standard is the first release.
Introduction
This standard is based on the Ministry of Public Security and the State Administration for Industry and Commerce, the State Administration of Quality Supervision, "People's Republic of China Certification and Accreditation Regulations" issued a joint
"Fire product supervision and management regulations", to meet the needs of fire protection products consistency check job enacted.
This standard is promulgated, the ability to improve the quality assurance of fire protection products producers in a fair, standardized and effective elimination on the basis of conduct
Anti-product certification, has very important significance.
Fire inspection requirements for product consistency
1 Scope
This standard specifies the terms and definitions fire products consistency check, the general principles, methods, assessed and treated.
This standard applies to the fire after initial factory inspection and product certification certificate of fire protection products consistency check supervision and management, and can also be used
Various types of fire supervision over product quality product consistency verification.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 19000 Quality management systems Fundamentals and vocabulary
GA 1035 fire products factory inspection General requirements
3 Terms and Definitions
GB/T 19000 and GA 1035 and define the following terms and definitions apply to this document.
3.1
Type test typeexamination
For the whole project to test the product to verify the technical performance and product standards conformity carried out, usually for representative samples.
3.2
Product consistency productconsistency
Mass production of products in line with the degree of sample inspection for certification.
Note. Product conformance requirements by the product certification and implementation rules, standards and certification bodies relevant requirements of regulations.
3.3
Features productcharacteristic
Characteristic appearance, size, function and performance of the product itself has, as well as key design, structure, process, formula ratio, etc.
characteristic.
3.4
Product profile productcharacteristicdocument
Describe the characteristics of the product related technical information, including documents, drawings, photographs, software, etc..
4 General
4.1 Purpose of inspection
The type of inspection and sample volume of certified products in the product nameplate, product critical components and material, product features in line with
Carry out other aspects of the degree of consistency checks, effectiveness and quality of products for consistency determination factory production control program run can continue to meet
Certification standards provide critical basis.
|