HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

FZ/T 81018-2024 English PDF

US$339.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 81018-2024: (Woven artificial leather clothing)
Status: Valid

FZ/T 81018: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
FZ/T 81018-2024	English	339	Add to Cart	4 days [Need to translate]	(Woven artificial leather clothing)	Valid	FZ/T 81018-2024
FZ/T 81018-2014	English	85	Add to Cart	0--9 seconds. Auto-delivery	Woven artificial leather garments	Valid	FZ/T 81018-2014

Basic data

Standard ID	FZ/T 81018-2024 (FZ/T81018-2024)
Description (Translated English)	(Woven artificial leather clothing)
Sector / Industry	Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard	Y76
Classification of International Standard	61.020
Word Count Estimation	16,129
Date of Issue	2024-12-10
Date of Implementation	2027-01-01
Older Standard (superseded by this standard)	FZ/T 81018-2014
Issuing agency(ies)	Ministry of Industry and Information Technology of the People's Republic of China
Summary	This standard specifies the terms and definitions, requirements, inspection methods, inspection rules, as well as marking, packaging, transportation and storage of woven artificial leather clothing. This standard applies to clothing produced with artificial leather (textile woven fabric as base fabric) as the main fabric.

FZ/T 81018-2014: Woven artificial leather garments

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Woven artificial leather garments ICS 61.020 Y76 People's Republic of China textile industry standards Woven artificial leather garments 2014-10-14 released 2015-04-01 implementation Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard proposed by the China Textile Industry Federation. This standard by the National Standardization Technical Committee clothing (SAC/TC219) centralized. This standard was drafted. Shenzhen Institute of Metrology and Quality Inspection, Shanghai Institute of Clothing, National Quality Supervision, Inspection and apparel Heart (Shanghai), Fujian 柒 licensing Group Co., Ltd., Hunan Province, can not forget Clothing Co., Ltd. The main drafters of this standard. Yang Ke, He Yu Xia, Zhou Shuangxi, Sun Min, Shi Lizhen, Wang Yongmei, Zeyang Wen, Wang Hongming. Woven artificial leather garments

1 Scope

This standard specifies the requirements of woven artificial leather apparel products, testing methods, test classification rules, as well as signs, packaging, transportation and storage All technical features. This standard applies to artificial leather (textile fabric fabric) as the main fabric for the production of clothing. This standard does not apply to infants and young children aged 36 months and under clothing.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 250 Textiles Tests for color fastness Gray scale card for color change assessment GB/T 251 Textiles Tests for color fastness Gray scale card for staining GB/T 1335 (all parts) clothing type GB/T 4841.3 Dyeing standard deep color card 2/1,1/3,1/6,1/12,1/25 GB 5296.4 Instructions for use of consumer products - Part 4. Textiles and clothing GB/T 6040 General rules of infrared spectroscopy GB/T 8949 polyurethane dry artificial leather GB 18401 National Safety Technical Code for Textile Products GB/T 21294 apparel physical and chemical properties of the test methods GB/T 21295 clothing physical and chemical properties of the technical requirements GB 21550 PVC artificial leather limited to hazardous substances GB/T 29862 Textile fiber content identification GB/T 31907 Garment Measurement Methods QB/T 2714 Leather Physical and mechanical tests Determination of fastness to folding FZ/T 80002 clothing logo, packaging, transportation and storage FZ/T 80004 clothing factory inspection rules

3 requirements

3.1 Instructions for use Leatherette fabric should be marked the main types of coating, the rest of the finished product instructions according to GB 5296.4 regulations. 3.2 size specifications Type set by GB/T 1335 provisions of choice. 3.3 raw materials 3.3.1 fabric According to the national standards for the use of artificial leather in line with the quality standards of the artificial leather fabric. 3.3.2 Lining Adopt the material suitable for the fabric used and in line with the quality requirements of this standard lining. 3.3.3 Accessories 3.3.3.1 lining, shoulder pads The use of fabrics with the performance, color and appropriate interlining cloth and shoulder pads, the quality should be consistent with the provisions of this standard. 3.3.3.2 Suture Use with the surface, accessories performance, color suitable for the suture; embroidery line shrinkage should be compatible with the fabric. 3.3.3.3 Buttons, zippers and accessories Buttons, zippers and other accessories suitable for the fabric used are used, the buttons are smooth and free of defects, the attachment shall be free from defects, sharpness and sharpness Lee edge, no deformation after washing and/or ironing, no discoloration, no staining, no rusting. Zipper mesh good, smooth and smooth. 3.4 splicing Noodle in the bucket, under the most buttonhole to allow a spell, but should avoid buttonhole position. Pants (skirt) waistband allows the back seam or side seam fight Pick one place, other parts are not allowed to stitching (except for special design). 3.5 color The color of all parts of the fabric as well as suits and suits and suits (skirts) sub-color of not less than 4, the material of the color difference of not less than 3-4 (special Design except). 3.6 appearance Finished appearance should meet the requirements of Table 1. Table 1 No. Item Requirements

1 pattern unclear not allowed

2 delamination (including bubbles, empty shell and poor fit) is not allowed

3 pinhole not allowed

4 marks, wrinkles are not allowed

5 rupture of the substrate is not allowed

3.7 sewing 3.7.1 Needle density according to Table 2 (except for special design). Table 2 Project pitch density note Brightness and darkness not less than 9 needles/3cm except for special needs Package suture not less than 9 needles/3cm - Needle no less than 7 needles/3cm shoulder seam, armhole, collar no less than 9 needles Triangle needle not less than 5 needles/3cm to single-sided calculation Keyhole Thin line not less than 12 needles/1cm - Thick line not less than 9 needles/1cm - Nail buckle Thin lines not less than 8 lines per eye Thick line not less than 6 lines per eye Mattress line height and keyhole thickness to adapt Note. Thin line. 20tex and below sewing thread; Thick line. 20tex above sewing thread. 3.7.2 The various parts of the sewing clothes, straight lines, neat, solid, uniform stitching, up and down the elastic line suitable, no jumpers, broken, starting and ending should be Needle back needle. 3.7.3 Flat clothing, not Alice, the collar part of the line is not allowed to have wiring. 3.7.4 绱 sleeves sleek, basically the same before and after. 3.7.5 bags and bags of appropriate size, Founder, round and round; both ends of the bag should be knotted, bags of cloth litter to be folded or sewing. 3.7.6 No needle plate on the surface of the fabric and feed teeth caused by traces; rolling, pressure to be uniform, the same width. 3.7.7 keyhole positioning accuracy, size, neat and solid. Eye position is not skewed, keyhole stitch beautiful, neat, flat clothes. 3.7.8 firmly fastened, buckle feet appropriate, knot no leakage. Wrapped foot height and the thickness of the keyhole appropriate, closed wire knot should be strong and complete. 3.7.9 buckle and buttonhole up and down to the right place. Sihetun solid, up and down to the right place, consistent with the appropriate, no deformation, elastic appropriate. 3.7.10 绱 placket zipper uniform, about the same height. 3.7.11 trademark, durability label accurate, clear, correct position. 3.7.12 Symmetrical parts are basically the same. 3.7.13 Within 30cm, there shall be no single continuous jumper or two single jumper, chain stitch does not allow jumper. 3.7.14 Decoration solid, flat clothes. 3.8 Specifications allow deviation The main part of the finished product specification tolerances according to Table 3. Table 3 in centimeters Part name specifications allow deviation Collar big ± 1.0 Length of clothing ± 1.0 Bust ± 2.0 Total shoulder width ± 0.8 Sleeve length ± 1.5 Waist ± 1.5 Pants (skirt) length ± 1.5 3.9 ironing 3.9.1 flat surface of the various parts of the surface, all parts of the iron ironing clothes, clean, no yellowing, water stains, light. 3.9.2 covered adhesive lining parts do not allow degumming, infiltration and wrinkling. 3.10 Physical and chemical properties 3.10.1 physical and chemical properties according to the provisions of Table 4. Table 4 project Grading requirements First-class quality products qualified products Raw ingredients and content in line with GB/T 29862 and 3.1 regulations Formaldehyde content/(mg/kg) pH value Decomposition of carcinogenic aromatic amine dye/(mg/kg) Comply with GB 18401 regulations PVC artificial leather limited to meet the requirements of GB 21550 harmful substances Leather Fabric Tensile strength/N ≥ The direction of 175 120 latitude Peel strength/N ≥ 12 Tear strength/N ≥ 18 Fold fastness 23 ℃, 25000 times -10 ℃, 5000 times No cracks on the surface, damage or separation of the substrate and the coating Anti-blocking allows mild blocking Alkali-resistant liquid surface crack-free crack resistance, the surface layer is not isolated Resistance to yellowing/grade ≥ 4 4 - Pants crotch seam strength/N in line with GB/T 21295 regulations Color fastness to rubbing/grade ≥ Dry Mount 4-5 4 3-4 Humoral 4-5 4 3-4 Lining Color fastness/level Dry friction Perspiration Water resistant Comply with GB 18401 regulations Sew crack degree/cm in line with GB/T 21295 regulations 3.10.2 According to the provisions of GB/T 4841.3, the color darker than 1/12 Dyeing standard darkness, the color is lighter than or equal to 1/12 Dyeing The standard color depth is light. 3.10.3 Polyvinyl chloride artificial leather limited to only assess the limited content of PVC artificial leather. 3.10.4 yellowing resistance assessment only light-colored and white leatherette fabric. 3.10.5 The degree of cracked seam is only evaluated in woven fabric.

4 test methods

4.1 inspection tools 4.1.1 steel tape or steel ruler, indexing value of 1mm. 4.1.2 Textiles Tests for color fastness Assessment of gray cards for color change (GB/T 250). 4.1.3 Textiles Tests for color fastness Gray scale cards for staining (GB/T 251). 4.1.4 1/12 Dyeing standard depth color card (GB/T 4841.3). 4.2 finished product specification 4.2.1 The main part of the finished product specifications according to 3.2 regulations. 4.2.2 The measurement of the main part of the finished product according to GB/T 31907, the specification allows the deviation by 3.8 provisions. 4.3 appearance determination 4.3.1 Finished appearance inspection generally use lighting, illumination of not less than 600lx, when conditions can also be used Northern Light illumination. 4.3.2 When assessing the degree of finished color, the incident light and the fabric surface about 45 ° angle, the observation direction should be perpendicular to the surface, the distance 60cm visual inspection, Contrast with GB/T 250 sample card. 4.3.3 The appearance of the finished product according to the provisions of 3.6. 4.3.4 Finished sewing quality according to 3.7. 4.3.5 finished ironing according to the provisions of 3.9. 4.4 Physical and chemical properties determination 4.4.1 Finished PVC artificial leather limited to harmful substances by GB 21550 test. 4.4.2 finished tensile strength, peel strength, tear strength, resistance to yellowing according to GB/T 8949 provisions of the test. 4.4.3 finished bending fastness test according to QB/T 2714, the use of dry samples. 4.4.4 Anti-blocking of finished products according to the provisions of Appendix A test. 4.4.5 finished lye alkali hydrolysis fastness. Preparation of 3 size 4cm × 6cm sample. The sample to be tested and a certain amount of temperature (23 ± 2) ℃, the concentration of 5% sodium hydroxide solution into a glass flat bottom container, immersed 24h at room temperature. If necessary, pass Add additional mass to the sample so that the sample to be tested is completely immersed in the solution. Remove the sample from the solution and rinse it thoroughly with deionized water at room temperature After drying to observe the surface of the specimen erosion cracking and the separation of the surface. 4.4.6 Other Physical and Chemical Properties The project shall be tested according to the provisions of GB/T 21294, in which the main types of artificial leather coatings shall be in accordance with the provisions of GB/T 6040 test. 4.4.7 did not mention the sampling site of the test items, according to the need to select the sample on the finished product.

5 test classification rules

5.1 test classification 5.1.1 Finished product inspection is divided into factory inspection and type inspection. 5.1.2 factory inspection According to the provisions of Chapter 3, except 3.10. Finished factory inspection rules according to FZ/T 80004 regulations. 5.1.3 Type inspection according to the provisions of Chapter 3. 5.2 Quality classification and defect classification rules 5.2.1 Quality classification Finished product quality classification is based on the existence and severity of defects. The number of defects in a single piece of product in the sample and sample The level of severity of grading, grading the level of sampling samples in a single product such as the number of products divided. 5.2.2 Defect division A single product does not meet the technical requirements of this standard, which constitutes a defect. According to the product does not meet the standards and product performance, the appearance of the extent of the defects are divided into three categories. a) Serious defects Seriously reduce the performance of the product, the serious impact on the appearance of the product defects, known as serious flaws. b) heavy defects Do not seriously reduce the performance of the product does not seriously affect the appearance of the product. But more serious does not meet the standard requirements of the defect, said To heavy defects. c) light defect Does not meet the standards, but the performance of the product and appearance of the smaller defects, called light defects. 5.2.3 quality defects determine the basis Quality defects determine the basis in Table 5. table 5 Project No. Light flaws Heavy flaws Serious defects Trademark misconduct, obviously skew; use that Ming content is not standardized, not clear Instructions for use Incorrect instructions for use Contents Missing items 2 - - Use adhesive lining parts degumming, infiltration, Wrinkled, blistered 3 ironing uneven clothes slightly yellowing, light; discoloration deterioration; broken 4 - - Pattern is not clear; delamination, pinholes, Road Marks, wrinkles and rupture of base defects Uneven clothes sewn, elastic inappropriate; the bottom is not Round; sling, string with the seal, back to the needle is not Firm; no more than two single in 30.0cm Jumper. Seam seam after sewing less than 0.8cm Continuous skip or 30.0cm within two More than single-hop needle; four, five-line sewing seam Jumper Chain stitch skip pin, broken line. Surface part Bit cloth edge needle exposed Keyhole, nail buckle, each seal is not strong; eyes Bit distance is not uniform, mutual difference greater than 0.4cm; The difference between buckle and eye is greater than 0.3cm Eye position uneven, mutual difference greater than 0.6cm; deduction and eye mutual difference greater than 0.5 cm (including attachments, etc.). Key missing eye Or broken more than 0.5cm Neck finish, loose loose slightly inappropriate, the surface Uneven clothes; 绱 collar to shoulder seam contrast deviation Greater than 0.6cm. The collar, collar nest, header not Flat service; collar outside the mouth, the serial port is not straight; collar tip Length, width and width of the mouth difference greater than 0.3cm Collar surface, loose tight obviously not suitable; Collar nest obviously uneven clothes, wrinkled; collar collar Son to shoulder deviation greater than or equal At 1.0cm 绱 sleeve is not round, not suitable before and after, eat potential Inconsistent; inconsistent with the two sleeves, each poor Greater than 0.8cm (including the sleeve cross stitch); Sleeve, side seam not straight, uneven clothes, long sleeves The length of each difference is greater than 0.8cm; short sleeve length Mutual difference greater than 0.6cm; two cuff width of each other Difference greater than 0.4cm Before and after the two sleeves each difference greater than 1.6cm - Table 5 (continued) Project No. Light flaws Heavy flaws Serious defects Placket (including the fork) shorter than the lapel 0.3cm or longer than the placket 0.4cm above; The placket is not smooth, uneven clothes, placket edge chops More than 3.0cm; door lapel stop anti-spit; Uniformed service, not straightforward, stirring more than 1.5cm Door, lapel length difference between each other is greater than 0.8cm - Shoulder seam not straight, uneven clothes; shoulders narrow Inconsistent, each difference greater than 0.5cm - - Pocket mouth, bag is not square, not round and smooth Clothes, not straight; bag cover and patch bag size not Suitable; embedding not straight, inconsistent width; Bag angle irregularities. Open the bag gap and embedded lines Width difference between each other is greater than 0.3cm; before and after the bag Mutual difference greater than 0.7cm; difference between each level is greater than 0.5cm; bag cover length, width difference between each other 0.3cm Bag mouth laxity; bag mouth serious hair Out; bag mouth without padding cloth. Sacks less than Pocket mouth (patch pocket) 0.5cm (one side) or small In the line; bag pad litter, no Overlock 12 loaded with uneven clothes zipper, teeth exposed inconsistent zipper was obviously uneven clothing zipper missing teeth, zipper lock off Rolling, stitching uneven clothes, elastic not Suitable; inconsistent width Hair, off, leakage less than or equal to 1.0cm; Surface area cloth edge needle eye exposed Hair, off, leakage greater than 1.0cm Provincial highway is not straight, uneven clothes; length, location Mutual difference greater than 0.5cm; fine pleated (including Tucker Line) uneven, asymmetric, mutual differences At 0.5cm; playing pleated surface width varies To, asymmetry around - - 15 Upholstery uniforms, not solid - - The difference between the two legs of each difference greater than 0.5cm; two Knees width difference between each other is greater than 0.3cm. skirt The length of the sub-side seam mutual difference greater than 1.0cm The difference between the two legs each difference greater than 1.2cm. Trousers mouth more than the width of each difference greater than 0.8cm Specifications allowed Deviation Specifications deviation exceeds the standard 50% Within Specifications deviation exceeds the standard requirements 50% and above Specifications deviation exceeds the standard requirements 100% and above Accessories 18 Suture, lining and other accessories color and fabric Not suitable. Nail buckle line and the buckle color Not suitable (except for decorative lines) Sewing thread and other accessories performance and fabric Not suitable (except for decorative lines) Buttons, metal buckles (including attachments, etc.) off Fall; metal corrosion Color difference 19 The color difference of the surface area does not conform to this standard Set half-level Surface color does not meet this standard Provisions of more than half Pitch 20 Below the standard 2 pins (including 2) needle) Below the standard 2 pins or more - Note 1. The above defects by serial number cumulative calculation. Note 2. Defects not covered by these rules may be judged according to the standard rules and with reference to similar defects in rules. Note 3. All lost labor, less preface, wrong order, are heavy defects. Lack of a serious defect. 5.3 Sampling requirements Sampling quantity by product batch. 500 (including 500) the following test 10. 500 or more to 1000 (including 1000) 20 checks. Check more than 1000 pieces 30 pieces. Physical and chemical properties of sampling according to the project pumping at least 4 pieces. 5.4 decision rules 5.4.1 single piece (sample) appearance judgment Excellent product. serious defects = 0 heavy defects = 0 light defects ≤ 4 First-class product. Serious defects = 0 Heavy defects = 0 Light defects ≤ 7 or Serious defects = 0 Heavy defects ≤ 1 Light defects ≤ 3 Qualified. serious defects = 0 heavy defects = 0 light defects ≤ 8 or Serious defects = 0 Heavy defects ≤ 1 Light defects ≤ 6 5.4.2 batch judgment Physical and chemical properties of one or more failed, that the test batch failed. Premium batch. the appearance of the sample number of superior products ≥ 90%, first-class products and qualified products ≤ 10%. Physical and chemical properties to reach the highest quality test means Standard requirements. First-class product approval. the appearance of the sample in more than the number of products ≥ 90%, qualified products ≤ 10% (excluding non-conforming products). Physical and chemical properties Test to achieve first-class product index requirements. Qualified product batch. qualified samples in the appearance of the sample above the number of products ≥ 90%, the number of unqualified ≤ 10% (excluding serious defects unqualified Product). Physical and chemical properties of the test to meet the requirements of qualified indicators. When the appearance of sewing quality judgment and physicochemical properties of judgment is inconsistent, according to the low level of judgment. 5.4.3 Number of judgments qualified The lot of judging the number of judgments in line with the above provisions for the corresponding grade products factory. 5.4.4 Number of judgments failed When the number of appearance quality judgments in each lot does not conform to the provisions of this standard, a second test shall be conducted and the number of tests shall be doubled. Still does not meet the requirements of this standard, then determine the batch of products failed. 6 logo, packaging, shipping and storage Finished product logo, packaging, transportation and storage by FZ/T 80002 implementation. Appendix A. (Normative) Anti-blocking test method A.1 principle Specimen coating surface after bonding to each other, subject to a certain period of heating, pressure, and then observe the separation of the bonding layer, the adhesion between the coating degree. A.2 Instruments Constant temperature oven with ventilation. A.3 Sample Preparation Sample size. 60mm × 60mm. A.4 Test procedure Take 6 samples, coating and coating on a total of 3 groups. The three groups of samples were respectively sandwiched in a 60 mm × 60 mm × 3 mm glass plate, And the load on the glass plate 30N load, into the temperature (80 ± 2) ℃ constant temperature oven with a blowing device, heated 24h after The sample was cooled at room temperature for 30 min and then the sample was peeled off slowly. A.5 test results The anti-blocking properties of each sample were evaluated as follows. --- No adhesion. When the sample is separated, the coating surface has no signs of adhesion. --- Light adhesion. When the sample is separated, a certain degree of adhesion occurs on the surface of the coating, but the coating is not damaged. --- Adhesion. the coating surface is difficult to separate or separation of the coating layer or part of the coating is damaged. To 3 groups of samples in the most serious assessment of adhesion, as the test results.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 81018-2024_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 81018-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 81018-2024_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 81018-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 81018-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 81018-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.