FZ/T 55001: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 55001-2012 | English | 519 |
Add to Cart
|
3 days [Need to translate]
|
Polyamide 6 dipped tyre cord fabric
| Obsolete |
FZ/T 55001-2012
|
| FZ/T 55001-1999 | English | 479 |
Add to Cart
|
4 days [Need to translate]
|
(Nylon 6 dipped tire cord)
| Obsolete |
FZ/T 55001-1999
|
PDF similar to FZ/T 55001-2012
Basic data | Standard ID | FZ/T 55001-2012 (FZ/T55001-2012) | | Description (Translated English) | Polyamide 6 dipped tyre cord fabric | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W52 | | Classification of International Standard | 59.060.20 | | Word Count Estimation | 13,169 | | Older Standard (superseded by this standard) | FZ/T 55001-1999 | | Quoted Standard | GB/T 2942; GB/T 3291.1; GB/T 3291.2; GB/T 3291.3; GB/T 4146.1; GB/T 4146.3; GB/T 4666; GB/T 4668; GB/T 6503; GB/T 6682; GB/T 8170; GB/T 14343; GB/T 14344 | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the strength of nylon 6 dipped tire cord fabric of terms and definitions, product organization specifications, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard ap | FZ/T 55001-2012: Polyamide 6 dipped tyre cord fabric---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Polyamide 6 dipped tyre cord fabric
ICS 59.060.20
W52
People's Republic of China textile industry standards
Replacing FZ/T 55001-1999
Nylon 6 dipped tire cord fabric force
Issued on. 2012-12-28
2013-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard FZ/T 55001-1999 "Nylon 6 dipped tire cord fabric force." This standard FZ/T 55001-1999 main difference
Differences are.
--- Increasing the scope of application (see Chapter 1, Chapter 1 of the 1999 edition);
--- Supplementary normative references (see Chapter 2, Section 2 of the 1999 edition);
--- Increased terms and definitions (see Chapter 3);
--- In Table 1, the organization specifications increased the 700dtex × 1,1170dtex × 1 species (see 41, 1999, version 3.1.);
--- Organization in Table 1 specifications, the original standard warp density, weft density, the width of the center is the specific value, modified to the central values
M represents, the values determined by the supply and demand sides negotiated (see 41, 1999 version 3.1.);
--- Table 2 adds performance assessment indicators 700dtex × 1,1170dtex × 1 species (see 52, 1999, version 3.2.);
--- Table 2 Performance project, cancel the elongation at break, elongation at break irregularity, moisture content, and other four straight by means of internal control plant
Landmark project, breaking strength irregularity into breaking strength coefficient of variation (see 52, 1999, version 3.2.);
--- Project performance when moisture modify customer unpacking the moisture content of not more than 1.5% of the acceptance criteria (see 5.2.2, 1999
Version 3.2.2);
--- Dry heat shrinkage rate of the oven method, instead of dry heat shrinkage meter method, and modify the test conditions (see 67, 1999 version 4.5.);
--- Tensile properties and moisture content of the original standard detection methods project specific detection methods modified to directly reference the relevant national standards
(See Chapter 6, Section 4 of the 1999 edition);
--- Rating index modified provisions (see Chapter 7, 1999 edition of Chapter 3).
The standard proposed by China Textile Industry Association.
This standard by the Shanghai textile industry technical supervision of the centralized.
This standard was drafted. Horse Chemical Fiber Co., Ltd., Shanghai textile industry technical supervision, Jiangsu Haiyang Chemical Fiber Co., Ltd.
The main drafters of this standard. Hao Zhenhua, Xue Fangfeng, Li Hongjie, Chen Jianxin, Wang Hongbin, the Red Army volts.
This standard replaces the standards previously issued as follows.
--- ZBW59001-1990, FZ/T 55001-1999.
Nylon 6 dipped tire cord fabric force
1 Scope
This standard specifies the force of nylon 6 dipped tire cord fabric of terms and definitions, organization products specifications, technical requirements, test methods, inspection regulations
Then, signs, packaging, transportation and storage.
This standard applies to the manufacturing cycle tire, battery tires, motorcycle tires used nylon 6 dipped tire cord fabric force quality appraisal and acceptance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2942 vulcanized rubber and fiber cord static adhesion performance measurement H extraction method
GB/T 3291.1 textile material properties and test - Part 1. fibers and yarns
GB/T 3291.2 textile material properties and test - Part 2. Fabric
GB/T 3291.3 textile material properties and test - Part 3. General
GB/T 4146.1 Textiles chemical fiber - Part 1. generic name
GB/T 4146.3 Textiles chemical fiber - Part 3. Testing Terminology
Determination of GB/T 4666 Textiles length and width of
Determination of GB/T 4668 woven fabric density
GB/T 6503 Test Methods for chemical fiber moisture regain
Laboratory use specifications and test methods GB/T 6682 Analysis
GB/T 8170 repair value expressed about the rules and limit values and judgment
GB/T 14343 chemical fiber filament linear density test method
GB/T 14344 chemical fiber filament tensile properties
3 Terms and Definitions
GB/T 3291.1, GB/T 3291.2, GB/T 3291.3, GB/T 4146.1 and GB/T 4146.3 and the following definition of terms and
Definitions apply to this document.
3.1
Adhesion strength (H- extraction) H-testadhesivestrength
Cord from the H-shaped rubber - when required to pull the cord strength test piece to N/cm representation.
3.2
Attached glue dippick-up
Dipped cord in the glue mass ratio Baipi cord of quality, expressed as a percentage.
3.3
Test cloth thetabbysamples
After the end of the roll of cloth woven cloth about 1m length, in the beginning parts of the dense weave some latitude zone, in the normal weft and weave a weft spacing
Section of about 1m of the test piece, and then close the weft weave some cloth to the end of the segment.
|