|
US$269.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
DZ/T 0275.5-2015: Specification identification of rock and mineral. Part 5: Polished section identification of ore
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| DZ/T 0275.5-2015 | English | 269 |
Add to Cart
|
3 days [Need to translate]
|
Specification identification of rock and mineral. Part 5: Polished section identification of ore
| Valid |
DZ/T 0275.5-2015
|
PDF similar to DZ/T 0275.5-2015
Basic data | Standard ID | DZ/T 0275.5-2015 (DZ/T0275.5-2015) | | Description (Translated English) | Specification identification of rock and mineral. Part 5: Polished section identification of ore | | Sector / Industry | Geological Industry Standard (Recommended) | | Classification of Chinese Standard | D04 | | Classification of International Standard | 73.02 | | Word Count Estimation | 11,199 | | Date of Issue | 2015-02-04 | | Date of Implementation | 2015-04-01 | | Quoted Standard | DZ/T 0130.9-2006; DZ/T 0275.1-2005; DZ/T 0275.4-2015 | | Regulation (derived from) | Ministry of Land and Resources - Announcement 2015 No. 5 | | Issuing agency(ies) | Ministry of Land and Resources | | Summary | This Standard specifies the contents in a reflective polarizer was identified ore-ray microscope emblem, steps, characteristics of ore, ore classification and naming. This Standard applies to the regional geological survey identified mineral exploration, engineering exploration and utilization of mineral and rock samples rays. This Standard does not apply to coal and rock, rock salt identification and rock specimens for oil. | DZ/T 0275.5-2015: Specification identification of rock and mineral. Part 5: Polished section identification of ore
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification identification of rock and mineral.Part 5. Polished section identification of ore
ICS 73.020
D04
People's Republic of China geological mineral industry standard
Rock and Mineral Identification Technical Specification
Part 5. Ore film identification
Part 5. Polishedsectionidentificationofore
Released on.2015-02-04
2015-04-01 implementation
Ministry of Land and Resources of the People's Republic of China
Content
Foreword I
1 Scope 1
2 Normative references 1
3 Equipment and materials 1
4 specimen 1
5 Preparation before identification 2
6 Ore light identification 2
7 ore name 6
8 quality inspection 6
9 Ore identification records and reports 6
Reference 7
Foreword
DZ/T 0275 "Specifications for Rock Mine Identification" is divided into five parts.
--- Part 1. General and general provisions;
--- Part 2. Rock sheet preparation;
--- Part 3. Ore film preparation;
--- Part 4. Identification of rock flakes;
--- Part 5. Ore light film identification.
This part is the fifth part of DZ/T 0275.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part is proposed by the Ministry of Land and Resources of the People's Republic of China.
This part is under the jurisdiction of the National Land Resources Standardization Technical Committee (SAC/TC93).
This section drafted by. Zhejiang Institute of Geology and Mineral Resources.
The main drafters of this section. Wu Guomou, Hu Yongping, Bian Zhihong, Zheng Cunjiang.
Rock and Mineral Identification Technical Specification
Part 5. Ore film identification
1 Scope
This part of DZ/T 0275 specifies the identification content, steps, ore characteristics, ore classification of ore light sheets under a reflective polarizing microscope.
And name.
This section applies to the identification of rock specimens and light sheets in regional geological surveys, mineral exploration, engineering surveys and mineral utilization.
This section does not apply to the identification of coal, rock and oil rock specimens.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
DZ/T 0130.9-2006 Geological and mineral laboratory test quality management specification - Part 9. Identification of rock mineral samples
DZ/T 0275.1-2015 Technical specification for rock minerals - Part 1. General and general
DZ/T 0275.4-2015 Specification for rock and mineral identification - Part 4. Identification of rock flakes
3 Equipment and materials
3.1 Equipment
3.1.1 Partial, reflective microscope or reflective polarizing microscope, and equipped with computer or mechanical table, counter, image analyzer.
3.1.2 Photomicrography system.
3.2 Materials
3.2.1 Hand press.
3.2.2 Mud and slides.
3.2.3 suede, polishing powder, lens paper.
3.2.4 Lens oil (cedar oil). The refractive index is 1.495~1.510.
3.2.5 Anhydrous ethanol and xylene.
WARNING - Xylene is harmful to humans and should be used in fume hoods.
3.2.6 Hammer.
3.2.7 Magnifying glass. 10 times magnification.
4 specimens
4.1 Ore specimen
The ore specimen cut by the polished light sheet is generally not less than one-half of the original specimen 30mm × 60mm × 90mm, in order to protect
The ore characteristics are subject to change.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of DZ/T 0275.5-2015_English be delivered?Answer: Upon your order, we will start to translate DZ/T 0275.5-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of DZ/T 0275.5-2015_English with my colleagues?Answer: Yes. The purchased PDF of DZ/T 0275.5-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|