Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169760 (Aug 1, 2020)
HOME  COVID-19   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

CQC-C0101-2014

Chinese Standard: 'CQC-C0101-2014'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
CQC-C0101-2014English1165 Add to Cart Days<=7 China Compulsory Certification Implementation Detailed-Rules - Wire and cable products Valid CQC-C0101-2014

   

BASIC DATA
Standard ID CQC-C0101-2014 (CQC C0101-2014; CQC-C01-01-2014; CQC-C0101-2014)
Description (Translated English) China Compulsory Certification Implementation Detailed-Rules - Wire and cable products
Sector / Industry China Quality Certification Center - CCC Implementation Detailed-Rules
Classification of Chinese Standard CQC
Word Count Estimation 41,496
Date of Issue 2014/7/16
Date of Implementation 2014/9/1
Older Standard (superseded by this standard) CQC-01C-002-2007
Drafting Organization China Quality Certification Center
Administrative Organization CQC
Regulation (derived from) Notice No. 23 of the State Certification and Accreditation Administration, No. 23 of the State Certification and Accreditation Administration
Summary This document specifies the China Compulsory Certification (CCC) implementation Detailed-Rules for Wire and cable products. This document defines the Wire and cable products's certification unit; certification entrusting; document requirements; sample req

CQC-C0101-2014
ID. CQC-C0101-2014
Mandatory product certification implementation rules
Wire and cable products
September 1, 2014 release
September 1, 2014 implementation
China Quality Certification Center
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
table of Contents
0 .4 General requirements
0.1 Introduction .4
0.2 Terms and Definitions .4
0.2.1 the use of detection equipment manufacturers (referred TMP mode) 4
0.2.2 producers witnessed detection (abbreviated way WMT) .4
0.2.3 ODM (Original Design Manufacturer) production plant .4
0.2.4 ODM initial certificate holder ..4
0.2.5 product consistency verification tests ..5
0.3 Manufacturer classification principles .5
Authentication Mode Select 1 6
1.1 Basic authentication mode ..6
Refinement authentication mode 6 1.2
1.3 authentication mode applicability .7
2 Certification application unit 7
3 certification process and deadlines 8
3.1 Certification Scheme 8
3.2 Time frame for certification 8
4 certified pre-certification requirements .8
4.1 Certification commissioned 8
4.1.1 The proposed commission of the certification and acceptance of 8
4.1.2 Requirements for Certification information and related .9
4.2 Type testing 9
4.2.1 Type test program ..9
4.2.2 Requirements for sample 9
4.2.2.1 Sample selection principle of .9
4.2.2.2 Sample Number .10
4.2.2.3 Sampling/send the sample ..10
4.2.3 Test items and requirements ..10
Implementation ..10 4.2.4 type test
4.2.5 Type test report .11
4.3 factory inspection ..11
Define and factory inspection 4.3.1 factory inspection target coverage requirements .11
4.3.2 initial factory inspection .11
4.3.2.1 check the contents .11
4.3.2.2 Factory quality assurance ability examination ..11
4.3.2.3 Product consistency check .12
4.3.3 Initial factory inspection timing and inspection time 12
4.3.4 Inspection findings ..13
4.4 product consistency verification tests .13
4.5 Evaluation of certification results and approval .13
5 Follow-up inspection requirements .13
5.1 follow-up inspection program 14
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
5.1.1-up inspection of the contents of 14
5.1.2 The frequency of follow-up inspection 14
5.1.3 Supervision after inspection man-days ..15
5.2 Follow-up audit trail requirements ..15
5.3 sampling test .15
5.3.1 sampling locations ..16
5.3.3 Sample test items and requirements .16
5.4 up inspection and approval of the results ..16
5.4.1 Evaluation of follow-up inspection .16
5.4.2 sampling test results of the evaluation ..17
5.4.3 Evaluation ..17
6 Certificate 17
6.1 validity of the certificate 17
Change 6.2 certificates ..17
6.3 Scope of Certification extended ..18
6.3.2 Adding authentication unit .18
6.4 certificate cancellation, suspension and revocation ..18
6.5 Use certificates ..18
7 certification mark 18
8 key raw materials .18
9 and charged according to claim 18
10 and the technical disputes, complaints and appeals related processes and deadlines 19
Annex 1 wire and cable products mandatory certification requirements for the type of sample .20
Annex 2 wire and cable products Compulsory Certification List of key raw materials .24
Annex 3 wire and cable products Compulsory Certification Product description 25
Annex 4 wire and cable products factories for compulsory certification of quality assurance capacity requirements ..27
Annex 5 wire and cable products factories for compulsory certification quality control testing requirements .33
Annex 6 to detect the use of company resources to implement detection (detection or witness) operating requirements 38
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
0 General requirements
0.1 Introduction
Wire and cable CCC implementation details (hereinafter referred to as the Regulations) is based on "compulsory production
Product certification and implementation rules for wire and cable products "(CNCA-C01-01.2014) (hereinafter referred to as the Implementing Rules) of
Requested the preparation, certification and implementation rules as a supporting document. In accordance with the Implementing Rules and China Quality Certification Center (in
Under the requirements referred to CQC) quality manual, procedures, work instructions, etc., in the maintenance of the product identified
Certificate validity, improve product quality, service certification and certification risk control principles, develop and publish this
Certification rules.
These Rules are based on the implementation of the rules require the preparation, use and implementation of common rules. Rules applicable
Range of products, in accordance with the relevant provisions of certification and implementation of rules is consistent and in accordance with the Certification and Accreditation Supervisor
Governor Management Committee (hereinafter referred to as CNCA) published catalog to define, implement directory adjustment announcement tune
whole.
CQC certification in accordance with the provisions of the implementation of the rules, the establishment of manufacturing enterprises category management requirements, combined with the production rate
Industry classification, clear wire and cable compulsory product certification implementation requirements.
0.2 Terms and Definitions
0.2.1 the use of detection equipment manufacturers (referred TMP mode)
Tests conducted by the designated testing organizations who use the company's equipment for testing, production enterprises to detect people
Members assist, test reports issued by the designated testing organization.
0.2.2 producers witnessed detection (abbreviated way WMT)
Experimental tests conducted by the company have used their equipment for testing, testing organization designated staff to detect
Project and witnessed the testing conditions, test personnel, the company issued the original records, the drafting of the test report that
Staff given testing organization review and confirm, the test report issued by the designated testing organization.
0.2.3 ODM (Original Design Manufacturer) production plant
The ability to use the same quality assurance requirements, the same product design, production process control and inspection requirements,
One or more producer (manufacturer) design, processing, producing the same products factory.
0.2.4 ODM initial certificate holder
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
ODM product for the first time to obtain tissue product certificates.
0.2.5 product consistency verification tests
Product safety performance consistency of evaluation of manufactured and found to comply with relevant product standards, carried out
product inspection.
0.3 Manufacturer classification principles
CQC collect, collate and all kinds of certified products and their manufacturers quality-related information on the company
Dynamic of category management. Principal certification, producers, production companies should cooperate.
Producers divided into four categories, each with a Class A, Class B, Class C, Class D representation. Sort least package
Include the following information.
① factory inspection (including the initial factory inspections and follow-up inspection Follow-up inspection) results;
② audit sampling test results (production site sampling or market sampling);
③ State pumping, pumping province, CCC and other special checks conclusion;
④ media exposure and consumer products, the public quality information feedback;
⑤ product certification testing capacity;
⑥ other information.
CQC following categories based on the basic principles of the company are classified rating, and according to all kinds of information given
Or irregular production of enterprises reclassifying grading, dynamic management. In principle, the company points
Class results shall be in accordance with the order of the DCBA stepwise increase, the order ABCD stepwise or cross-level drop.
Table 1 classification principles of the company
Business category classification principles
A Class
Class B enterprises to provide relevant information, collected by the certification body of quality information and businesses to certification bodies
Relevant information provided by a comprehensive risk assessment and determine the classification results assessed include at least
The following aspects.
a) factory inspection. initial factory inspection nearly two years, no follow-up inspection after inspection or verification site
Not by the situation;
b) product testing, inspection results. After nearly two years certified supervision and inspection found no non-conformities, national
, Provincial quality supervision and inspection of all types and consistency verification test results were "qualified";
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
c) by CQC detection capability of the company or with the national accreditation of Quality Supervision, Inspection and Quarantine
Class AA Qualification Administration announcement.
d) Other certified products and their manufacturers quality-related information.
Class B
In addition to Class A, Class C, other manufacturers like D. There is no quality information on the company, its
Grading classification defaults to the class B.
Class C
Meets one of the following conditions.
a) factory inspection judged to be "field-proven" (except for the standard version for the reason);
b) the media exposure of the certified product quality problems and the Department of corporate responsibility, but does not involve suspended, revoked
Certificates;
c) CQC certified according to manufacturer and product-related quality information comprehensive evaluation concluded that the need to adjust
For the class C.
Class D
Meets one of the following conditions.
a) initial factory inspection, follow-up inspection after inspection conclusions determined as "no-go" of;
b) Follow-up inspection test results for safety item failed;
c) unjustified refusal inspection and/or sampling of;
d) media exposure there is a big influence of the certified quality system and corporate responsibility;
e) national, provincial and other types of product quality supervision and inspection results to be ineligible and unqualified projects
Certified product quality serious impact;
f) does not meet the other requirements of compulsory product certification has been suspended, revoked certificates;
g) CQC certified according to manufacturer and product-related quality information comprehensive evaluation concluded that the need to adjust
In Category D.
NOTE. If changes to CQC public documents.
1 Authentication mode selection
1.1 Basic authentication mode
Basic authentication mode. up inspection after type testing
Refinement 1.2 authentication mode
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
According to the basic authentication mode, combined with production enterprise management principles, for different categories of enterprises in the certification
Mode appropriate to increase the relevant certification elements, specific and detailed as follows.
Mode 1. Type test certified oversight
Mode 2. Type tests after initial factory inspection (consistency confirmation test) up inspection
Mode 3. Type test (sample) after initial factory inspection up inspection
Among them, the relevant requirements of follow-up inspection, see 5.1 "Follow-up inspection oversight program" requirement.
1.3 Applicability authentication mode
Certified clients according to their own actual situation, see Table 2 authentication mode applicability of proposed recognition applies
Permit application mode.
Applicability Table 2 authentication mode
Business category
A type of application
Initial application class applications from non-expanded expanded categories of applications
It has been the use of the certificate
ODM application
Class A/Mode 1 Mode 1 Mode 1b
Class B Mode 2 or Mode 3 Mode 2 or 3, 1, 2 or 3c mode 1
Class C/3 Mode 2 or Mode 2 or Mode 2 or 3 3
Class D/Mode 2 or Mode 3 Mode 2 or 3 2 or 3
a. "first application". the company is not obtained within the scope of Rule product CCC certification carried out the initial certification commission; "expanding class application".
The company has obtained CCC certificate within the scope of Rule product certification commission carried out again, and the products have been certified products and subcategories small
Different types; "non-expanding type application". the company has obtained within the scope of Rule product CCC certification and recertification carried out the commission, and the yield
Subcategories and products have been certified Product Model same; "the use of ODM have been requesting the certificate". the use of ODM manufacturers to apply for the certificate has been carried out.
b. exactly the same for the certified products with the original certified product, only the applicant or manufacturer to change the situation, the information provided could be considered a business
Consistency verification, alternative type testing.
c. For certified products, production processes and products have been certified to apply significant difference can not be overwritten, you should consider 2 or 3 mode.
CQC certified products based on the principle of control and certification risk characteristics, combined with production enterprise management knot
As a result, the client can determine the applicable certification authentication mode.
2 Certification application unit
Accordance with article 4 of the Implementing Rules.
The same manufacturer (producer), different production companies (sites) products should be in different application
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
Unit; the same company (site), different manufacturers (producers) products shall be in different
Application unit.
3 certification process and deadlines
3.1 Certification Process
Certification process include. certification commission, accepting and data evaluation, initial type testing and factory inspection, to close
Costs, evaluation of certification results and approval of certification decision making and follow-up inspection and other links.
3.2 Time frame for certification
Date of acceptance certification commission till the issuance date of the certificate of no more than 90 days (long detection period production
Exclusion product), including type testing, initial factory inspection and post-inspection report time period (applicable
), The evaluation of certification results and approval of certificates.
More time to complete certification activities, excluding the rectification does not meet the time, detection time and retest consistency
Confirm the test of time. The situation does not meet the requirements for certification, CQC/laboratory should inform the client in an effective manner
People, and explain the reasons.
The rules did not make the certification process and clearly defined time limit in order to CQC relevant program files and operating means
Guide book requirements will prevail .CQC accordance with the relevant procedures and work instructions document control requirements of the time limit to complete the certification
Related work, certification clients, producers, production companies should cooperate.
Authentication client, the producer (manufacturer), the manufacturer certification implementation should be actively cooperate and
Help. Since the authentication client, producers, manufacturers its own reasons to complete certification activities leading to overdue
Authentication timeout, not counted in the time frame for certification.
4 certified pre-certification requirements
4.1 Certification commission
4.1.1 certification commission proposed and accepted
When care is required to provide the necessary corporate information and product information, including business registration certificate, organization code and
Product descriptions .CQC according to the relevant requirements of the application for review promptly issued admissible or inadmissible through
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
Know, or ask the client to re-apply for accreditation certification after rectification.
4.1.2 Requirements for Certification information and related
Certification principal shall, after receiving the required application to CQC certification scheme and/or provide information about laboratory
Application information and technical materials typically include.
(1) a formal application;
(2) description of wire and cable products;
(3) factory inspection questionnaire;
(4) certified client, the producer (manufacturer), the company registration documents;
(5) key raw materials producers (manufacturers) and/or the company quality certificate (if any);
(6) other information (such as. quality management system certification documents, a trademark of supporting documents, etc.);
(7) The authentication client, the producer (manufacturer), signed a related agreement between manufacturers or contract,
ODM such agreement, power of attorney and a copy of the original certificate (if required) and the like;
(8) For the application, and documents related to the change project.
Business name, address and other data or information to declare laws and regulations compliance, responsible for the authenticity and commitment
Bear the corresponding responsibility.
4.2 Type tests
4.2.1 Type test program
The need for type test certification commission, after passing the examination application data, CQC should develop Type
Protocol, and notifies the client authentication type testing program including sample requirements and quantities, and testing standards
Project, laboratory information.
4.2.2 Sample Requirements
4.2.2.1 Sample selection principle of
CQC in accordance with the implementation of the rules set forth in Annex unit division, according to the Rules for the Implementation of Annex 1 to send samples
Requirements and principles set sampling unit or combination unit/send samples of the sample requirements.
Products when applying for certification, samples shall products selected representative model specifications,
And selected samples should cover the safety requirements of products, structural requirements and key raw material manufacturers.
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
4.2.2.2 Number of Samples
General wire and cable products, Quantity of 50m.
Each core conductor cross section ≥50mm2 plastic insulation products, each core conductor cross-section of the insulating rubber production ≥16mm2
Goods, Quantity of ≥30m.
4.2.2.3 Sampling/send the sample
Under normal circumstances, the principal certification program required type test and sample preparation to designated experiments
Chamber test specimens shall be entrusted to a certified company according to the normal way of processing products, certification commission
Shall ensure that the sample provided by the actual production of its products consistent .CQC and/or laboratory response authentication delegation
Authenticity provided samples for review. Doubt the authenticity of the laboratory sample, it should be said to the CQC
The situations, CQC make the appropriate decision.
For the authentication mode, type test for the situation sampling method, CQC should arrange at the production site
In accordance with the type test sample requirements for sampling and sample letters, and ensure that each product category have at least one sample
(The structure of the sample should have some representation) at the end of the line drawn as the authentication principal demand made,
CQC inspector can be arranged at the same time factory inspection sample, in this case, the sample should be checked at the factory
Conclusion is qualified, or the presence of non-conformity, the need to verify in writing under the premise of the effectiveness of corrective measures into
Row.
In principle, the company should ensure that within 20 days the samples were sent to the designated laboratory type testing as identified
Certificate principal due to special circumstances not sent samples within the specified time, the need to provide their delay CQC sample delivery charge
Points reasons.
4.2.3 Test items and requirements
In accordance with the implementing rules 6.1.3 execution.
Implementation 4.2.4 type testing
Laboratory type testing samples, should ensure that the detection conclusion is true, accurate, do the whole process of detection
A complete record retention and archiving, as well as to ensure the test recording process and results of traceability. Type test
When the inspection process found abnormal situation should be timely communication with the CQC, and dealt with accordingly.
When type tests have failed projects, the client authentication allows corrective. Corrective actions and retest should generally be 3
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
Completed within months, more than the period considered as the principal certification certification abandon commissioned termination certification, certification commission
People can choose to terminate the commission of the certification.
For rectification sample sampling methods, shall CQC arrange on-site sampling, such as the factory has been completed
Inspection, to be based on reason and failed projects, evaluation to determine whether the need to add factory inspection.
Type test takes no more than 30 working days (from the lab receives the type and date of receipt of the test charge
Type test report except to the long testing period ending date of issue of products,), not including the corrective actions
Time period specified retest the same type testing requirements.
4.2.5 Type test report
CQC is responsible for organizing the preparation of a uniform type test report format.
Laboratories should be uniform format type test reports issued by the laboratory and its personnel also needs to be
Content type test reports and testing conclusions correctness.
4.3 factory inspection
Define and factory inspection 4.3.1 factory inspection target coverage requirements
Mandatory product certification facility means. certified products for final assembly and/or testing and the Gasch identified
Certification Mark of the place. When the above process the product can not be completed in a place, you should at least include a choice
Routine and verification test (if any), and nameplate affixed to the inner part of the certification mark of a more complete place
Check, and retain the rights of other places further examination.
Factory inspection should cover "to apply for certification/certified product" and all "processing premises." "Processing premises" means
All departments, places, people, and activities related to product quality certification; coverage "to apply for certification/certified products."
Refers to coverage, product consistency check the product consistency check for each type of plant response codes defined product implementation.
If you can not complete the certification bodies in the annex 4 production site factory inspection requirements, it can be extended to certification
Principal, producers, etc. to be checked.
4.3.2 initial factory inspection
4.3.2.1 check the contents
Content initial factory inspection for factory quality assurance ability and product consistency check.
4.3.2.2 Factory quality assurance ability examination
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
Checks in accordance with the requirements of Annex 4. Furthermore, it should according to "wire and cable products compulsory certification work
Plant quality control testing requirements "(see Annex 5) for verification.
For ODM model also involves supplementary ODM model based on "compulsory product certification implementation rules
Provisions "check.
4.3.2.3 Product consistency check
Factory inspection, should be the site of production of the certified products for each producer (manufacturer), each
Products extracted at least one sample, verify the following.
1) on the product certification and packages marked with the product name, model, specifications and product standards should
Provisions consistent;
2) Product surface printing product name, model and specifications shall be in accordance with the product standards;
3) the surface of the printed product producer (manufacturer) name, trademark should be with producers (manufacturers) Note
Album name, registered trademark agreement;
Structure 4) the product should be product standards, "type test report," the description is consistent;
5) raw materials products by name, type, size, quality, and producers should "type test report."
/ Certification body to confirm changes consistent;
6) an insulating sheath processing methods should be consistent with the "product description report," the description.
Each type of product samples drawn at least one designated test pilot project designated as "wire and cable production
Product quality control testing factories for compulsory certification requirements "(Annex 5) in batch verification tests carried out, will
To routine test items should be included.
4.3.3 Initial factory inspection and examination time opportunity
Under normal circumstances, after the type test, and then the initial factory inspection. If necessary, type test
And factory inspection can be performed simultaneously. Should be completed within one year after the type test on factory inspection principles,
Otherwise, it should be re-type testing. The initial factory inspection, factory production of products should be certified range.
Factory inspection time based on the number of units of certified products is determined by the application, with due consideration of the plant's production
Size and distribution, usually 1 to 4 man-day.
The number of man-days for ODM producer (manufacturer) on-site inspection by "real Compulsory Certification
ODM model involves applying rules Supplementary Regulations "implementation.
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
4.3.4 Inspection findings
CQC inspection groups to report conclusions factory inspection presence of non-conformity, the factory should be in CB
To complete the rectification within the prescribed period, CQC (inspection team) to take appropriate corrective way to verify the results. No
Rectification can be completed on schedule, the factory inspection without treatment.
4.4 product consistency verification tests
Authentication mode contains product consistency verification inspection, factory inspection if qualified, or deposit
In the non-conformity, corrective measures need to verify in writing the validity of each application unit extracts a spot
Samples (samples in which at least one end of the line drawn, the sample should have a certain structure representative),
Get prototype formula test laboratory for product consistency confirmation test.
Test basis, projects, methods, reporting requirements with the type test.
Conclusions of the examination to be ineligible, the applicant shall carry out rectification, and completed within the period specified in the certification body
Application for sampling and re-sampling, otherwise, the product consistency confirmation conclusions of the examination to be ineligible. Resampled
Maximum test once.
4.5 Evaluation of certification results and approval
With the implementation of Rule 6.2.
When type test failed, the initial factory inspection does not pass or product consistency confirmation unqualified (eg
There), CQC failed to make a decision to terminate the certification after the termination of the principal certification certification commission to continue to recognize
Certificate, should be re-accreditation commission.
Requirements Oversight after 5 certified
Authentication client, the producer (manufacturer), the manufacturer should be "compulsory product certification regulations,"
"Certificate and certification logo management approach", "Compulsory Certification Mark," "mandatory production
Product certification cancellation, suspension, revocation implementing rules "," mandatory product certification and implementation rules involved ODM
Supplementary Regulations "model, the implementation of rules, implementing rules and certification standards and ensure their continued production
Certified products comply with laws, regulations and standards to ensure quality assurance and product consistency continued control characters
Co-certification requirements.
Same manufacturer, different manufacturers (site) should receive either certified after supervision same manufacturer
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
(Site), different producers (manufacturers) should receive either certified after supervision.
Authentication client, the producer (manufacturer), the manufacturer shall present the provisions of Rule 5.1 of the period
Accept supervision, otherwise the press can not accept the supervision of certified disposal. For non-continuous production of products for Certification
Person, producer (manufacturer) or the company should take the initiative to submit production plans CQC, in order to follow up on
Effectively carry out track inspections.
5.1 follow-up inspection programs
5.1.1-up inspection of contents
Certified after supervision mode after the track inspection and monitoring including certified sampling (sample production site inspection
Measurement and/or market sampling), combined with the company classification results and the actual situation, in which follow-up inspection
Or a combination of a variety of ways.
In accordance with the manufacturer classification result (category), Table follow-up inspection programs based on the determined 3.CQC
Certification scheme for certified companies supervised.
Table 3 up inspection frequency, content and methods
Business category
Certified after supervision
The frequency content of a way
A Class
Completed 2 years 1
"Tracking product sampling inspection (production site)."
"Product sampling (market)."
Priority flight
Class B 1 1 completed
"Tracking product sampling inspection (production site)."
"Tracking product sampling inspection (market)."
Priority flight
Class C
1 completed 1
or above
"Tracking product sampling inspection (production site)."
"Tracking product sampling inspection (market)."
flight
Class D
1 completed 2 times
or above
"Tracking product sampling inspection (production site)."
"Tracking product sampling inspection (market) (if necessary)."
flight
a. "Flight" refers to the way the inspection party without prior notice.
5.1.2 The frequency of follow-up inspection
In accordance with the manufacturer classification result (category), follow-up inspection of the fundamental frequency are shown in Table 3.
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
When the A, B, C, Class D, the company in the following cases, based on the basic frequency of inspection on the increase
The frequency of inspection.
1) The certified product has serious quality problems (such as the occurrence of national or provincial quality supervision failure, etc.)
Or user complaints raised quality and greater impact, verified or authenticated principal/producer (manufacturer)
/ Production of corporate responsibility.
2) CQC reason to certified product standards in line with safety requirements when questioned.
3) When the results of the company rating (category) declined.
Increase the frequency of supervision and inspection does not take the form of advance notice.
5.1.3 up inspection man-days
The total man-days follow-up inspection in accordance with the number of units of certified products is determined with due consideration of the plant's production
Size and distribution, is generally 0.5 to 1 man-day, including the time of follow-up inspection Follow-up inspection, the use of the company
Detect resource production site sample testing time, the market sampling of time.
Requirements 5.2 Tracking certified check
Follow-up examination including but not limited to quality assurance inspection capacity, consistency inspection and "CCC" mark
The use of blogs, and certificate of inspection.
CQC inspection in accordance with quality assurance capacity requirements of the Regulations of the factory quality assurance ability.
Product consistency check is basically the same content certified product consistency check the content and the initial inspection of the factory.
Furthermore, it should according to "wire and cable products factories for compulsory certification quality control testing requirements" (see Annex
5) for verification.
Key follow-up inspection to check the contents include at least but not limited to product consistency check, factory inspection previous
Failed to verify corrective measures, laws and regulations and other requirements for the validity of the implementation of the certificate and certification
And other signs of use.
For certified to ODM model, an increase of ODM manufacturers in tracking content verification inspection,
Including the implementation of ODM cooperation agreement, Certification Mark, the actual situation of production of certified products and so on.
In product consistency check when particular attention to the consistency of ODM products.
5.3 sampling test
Supervision sampling points production site sample testing and market sampling.
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
5.3.1 Sampling Location
Sampling locations include but are not limited to the company's end of the line, warehouse, certified products consumers,
Distributors and sales outlets. Principal certification, the producer (manufacturer), the manufacturer should cooperate actively, such as
Provide certified product sales information, as well as product consumers, distributors and sales outlets and other information in the tracking
Check sampling, sample confirmed by the company's qualified products at random.
When the market sample, principal certification, the producer (manufacturer), production enterprises should actively cooperate,
Confirm the authenticity of the sample and the sample bear transportation costs.
5.3.2 the number of samples and the base
Each authentication unit to extract a representative sample.
The sampling base principles should be drawn more than 20 times the number of samples at the end of the production line, marketing/sales business
When the sale outlets sampling can not consider sampling base.
For ODM certified mode, the actual stock of sampling base.
5.3.3 Sample test items and requirements
Certified type testing program can be used as sample test items, CQC may be different for different products
Carry out part or all of the items and their impact on product safety.
Use the production site sample detection, such as production companies have standards and certification requirements of the Regulations
Test conditions and we agree to the use of company resources to implement detection detection (detection or witness), reference should be attached
Member of claim 6 utilizing the company resources to implement detection detection (detection or witness). Take market sampling
When mode, under normal circumstances, the sample should be sent to designated laboratories for testing.
Factories should be sent within 10 days after sampling samples designated laboratory testing should be completed in 20 working days
jobs.
5.4 up inspection and approval of the results of the evaluation
5.4.1 Evaluation of follow-up inspection
Follow-up inspection found no non-conformities or minor nonconformities and site have been rectified and confirmed by the inspection group
Effective tracking test results evaluated through.
When the presence of non-conformity follow-up examination and did not have a serious impact on the product safety performance, allowing a deadline (not
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
More than 40 days) rectification. Enterprises should take corrective measures, and corrective materials to the inspection team.
When the consistency check system or the presence of a serious defect, a direct impact on the safety performance wire and cable products, tracking
Check the results of the evaluation is not passed.
CQC inspection team to verify the rectification of a written or on-site verification. Rectification of effective follow-up examination knot
Fruit by; overdue completion of rectification and modification result does not satisfy the requirements, the results of follow-up examination is not passed.
5.4.2 sampling test results of the evaluation
When the product supervision of qualified sampling, sample production site detection/evaluation of the results of sampling and testing market
Through.
When the product is unqualified audit sampling, sample production site detection/evaluation results of sample testing market
Fruit does not pass.
5.4.3 Evaluation
After comprehensive evaluation of the certified results of the monitoring, including follow-up examination evaluation, monitoring and evaluation of sampling.
When evaluated by, CQC certificate issued notice of approval to keep up inspection results to the certification client
Books, allowed to continue to use the certificate and certification mark. If any one of the results of the evaluation is not passed, then certified after
Oversight by the results of the evaluation does not, CQC suspend or revoke the certificate to make decisions based on the respective situation.
6 Certification
6.1 validity of the certificate
With the implementation of Article 8.1 of the Rules.
6.2 Certificate of Change
Follow-up, when it comes to certification, "Wire and Cable Product Description" content matters prescribed in the Regulations or the occurrence of
When changes in the principal certification should change/expand involved products manufactured, sold or imported before the declaration to CQC
And to submit a formal written commissioned by the CQC approval before implementation.
CQC evaluated according to the change of the content and the information provided to determine whether to approve the change or need to feed
Line sample inspection and/or factory inspection, the sample for inspection and/or factory inspection, testing and/or inspection qualified
In order to approve the change in principle, should be subject to the original model representative sample type test for change Review
Base price.
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
Key raw materials certified product model, when changes to specifications, the producer (manufacturer) occurs, CQC should
Referring to Annex 1 of the key raw material coverage requirements, the need to send samples to determine whether additional tests. Certification Committee
Trustee is also available after the change of raw materials product certification, sampling once supervised when extracting the next sample
Product type testing.
Authentication based on changes in standards, certification principal certificate should be completed within the time limit prescribed standard CQC
Quasi conversion work. Other changes to the relevant regulations of CQC.
6.3 extend the scope of certification
Extended Product Specification 6.3.1 within the same unit
For product model specifications within the same extended authentication unit after inspection product certification commission, in principle, should be
Verification extended products and Differences certified products, combined with the formula in Annex 1 and prototype test report to determine whether the need
Send samples tested. Data verification and/or sample test passed, according to the requirements of the client authentication certificate issued separately
Certificate or re-issued certification.
6.3.2 Adding authentication unit
For adding new expansion unit Model specifications of the products after inspection commission of the certification, the certification shall mention the principal
Post new certification application for certification model requires the implementation of the provisions of 1.3.
6.4 certificate cancellation, suspension and revocation
With the implementation of Rule 8.4.
6.5 Use of certificates
With the implementation of Rule 8.5.
7 certification mark
With the implementation of Article 9 of the Rules.
8 key raw materials
Wire and cable products Compulsory Certification list of key raw materials in Annex 2.
9 and charged according to requirements
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
Certification shall be charged by the certification bodies, testing bodies in accordance with the relevant national statutory regulations. Certification should be the principal
Full and timely payment of the cost of certification.
10 and the technical disputes, complaints and appeals process and time-related requirements
Follow CQC "appeals, complaints and disputes handler" requirements.
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
Annex 1 wire and cable products mandatory certification requirements for the type of sample
Type test sample selected should meet a representative sample of the annex to the Product Specification
And key raw materials manufacturers seeking coverage requirements.
First, the product model specifications of a representative sample requirements.
The specific requirements of the respective units shown in Table 1;
Table 1 Product Specification representative sample request
Reference Model
Standard Code
Type test sample delivery requirements
Polychloroprene
Ethylene
insulation
No protection
Electric sets
Radio
1.1
60227IEC 01 (BV)
60227IEC 02 (RV)
GB/T 50
23.3
Both models were sent to.
Close to the minimum cross-section of a sample,
Close to the largest cross-section of a sample.
1.2
60227IEC 05 (BV)
60227IEC 06 (RV)
60227IEC 07 (BV-90)
60227IEC 08 (RV-90)
Conductor cross-sectional sample of any hard one,
Flexible conductor arbitrary cross-section sample 1,
Including 90 type product in which a sample should be
90 type.
1.3
BV
BLV
BVR
JB/T 873
4.2
Close to the maximum cross-sectional sample 1,
Close to the minimum cross-sectional sample 1,
When including copper, aluminum conductors, each should send a sample;
When including the BVR, in which a sample should be
BVR.
Polychloroprene
Ethylene
insulation
Polychloroprene
Ethylene
jacket
cable
2.1 60227IEC 10 (BVV)
GB/T 50
23.4
Close to the minimum and maximum cross-sectional sample of a core number,
Close to the maximum and minimum number of cores cross section of a sample.
2.2
BVV
BLVV
BVVB
BLVVB
JB/T 873
4.2
Sample with approximately maximum number of cores and cross-section of a minimum,
Sample with approximately minimum number of cores and a maximum cross section,
When including copper, aluminum conductors, each should send a sample,
When including round and flat, shall be sent to each sample one.
Polychloroprene
Ethylene
insulation
Soft Power
Electric cable
3.1 60227IEC 41 (RTPVR)
GB/T 50
23.5
JB/T 873
4.3
An arbitrary cross-section sample.
3.2 60227IEC 43 (SVR) an arbitrary cross-section sample.
3.3
60227IEC 52 (RVV)
60227IEC 56 (RVV-90)
An arbitrary standard sample,
When including round and flat, shall be sent to each of the samples 1,
Including 90 type, in which a sample should be 90
type.
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
twenty one
Reference Model
Standard Code
Type test sample delivery requirements
3.4
60227IEC 53 (RVV)
RVV
60227IEC 57 (RVV-90)
Close to the maximum number of cores and a minimum cross section of a sample,
Close to the minimum number of cores and the maximum cross-sectional sample 1,
When including round and flat, shall be sent to each of the samples 1,
Including 90 type product in which a sample should be
90 type.
3.3 and 3.4 at the same time all applications should be sent to 90 3.4
Type samples, 3.3 90 should be sent to a non-type samples, like the rest
Product according to the above requirements should select.
3.5
RVB
RVS
JB/T 873
4.3
Close to the maximum cross-sectional sample 1,
Close to the minimum cross-sectional sample 1,
Samples should cover type applied for.
PVC must
PVC edge
Sheath electric elevator
Cables and (or)
Flexible electrical connection
60227IEC 71f (TVVB)
TVVB
60227IEC 71c (TVV)
GB/T 50
23.6
JB/T 873
4.6
Sample with approximately maximum number of cores and cross-section of a minimum,
Sample with approximately minimum number of cores and a maximum cross section,
When including flat and round, each should send a sample.
PVC must
PVC edge
Sheathed soft oil
cable
60227IEC 74 (RVVYP)
60227IEC 75 (RVVY)
GB/T 50
23.7
Sample with approximately maximum number of cores and cross-section of a minimum,
Sample with approximately minimum number of cores and a maximum cross section,
When including the P-type, in which a sample should be P-type.
PVC must
Edge installation of electricity
Lines and (or)
Shielded wire
AV
AVR
AVRB
AVRS
AVVR
AV-90
AVR-90
AVP
RVP
RVVP
RVVP1
RVVPS
AVP-90
RVP-90
JB/T 873
4.4
Single Wire. Any cross-sectional sample 1,
And more than two-core cable. close to the maximum and minimum number of cores
Section of a sample, the maximum and minimum number of cores close
Section of a sample,
When including shielded, shall send samples of various types of shielding
A product,
Including 90 type, should be sent to any type specification 90
Type samples 1
When including AVRB, samples should be sent to AVRB type 1
Member,
When including AVRS, samples should be sent to AVRS type 1
Member,
When including RVVPS, samples should be sent to RVVPS type 1
Member,
When including the A series, P series, each department
Column should be sent at least one sample, the product includes a sheath
When each series should at least sample belt sheath 1
Member.
Heat
Rubber
7.1 60245IEC 03 (YG)
GB/T 50
13.3
Close to the largest cross-section of a sample.
Mandatory product certification implementation rules of wire and cable products CQC-C0101-2014
twenty two
Reference Model
Standard Code
Type test sample delivery requirements
insulation
cable
7.2
60245IEC 04 (YYY)
60245IEC 05 (YRYY)
60245IEC 06 (YYY)
60245IEC 07 (YRYY)
GB/T 50
13.7
Close to the minimum cross-sectional sample 1,
Close to the maximum cross-sectional sample 1,
Stranded conductor included, should be sent to close to the maximum cross-section
The first two kinds of samples a conductor; not including the first two kinds of guide
When the body should be sent to close to the maximum cross-section of the fifth conductor
Sample 1.
Rubber
insulation
elevator
cable
(or)
Electric welding
Electromechanical
8.1
60245IEC 70 (YTB)
60245IEC 74 (YT)
60245IEC 75 (YTF)
GB/T 50
13.5
Send samples for each model of each one,
Samples should be sent at least close to the maximum number of cores 1.
8.2
60245IEC 81 (YH)
60245IEC 82 (YHF)
GB/T 50
13.6
Close to the maximum cross-sectional sample 1,
When it comprises two models, sending another model close to the maximum
A small cross-sectional sample,
When including composite cover layer, should be sent to the composite cover layer comp
Product 1.
Rubber
insulation
Weave
Soft Power
9.1
RE 300/300V 0.3-4;
RES 300/300V 0.3-4;
REH 300/300V 0.3-4;
JB/T 873
5.3
Close to the largest cross-section of a sample,
When including REH type, type samples should be sent to REH 1
Member.
9.2 60245 IEC 89 (RQB)
GB/T 50
13.8
Sample an arbitrary standard.
Common
Rubber
Soft Power
Electric cable
10.1 60245IEC 53 (YZ)
GB/T 50
13.4
Close to the maximum number of cores and a minimum cross section of a sample,
Close to the minimum number of cores and the maximum cross-sectional sample one.
10.2 60245IEC 57 (YZW)
Close to the maximum number of cores and a minimum cross section of a sample,
Close to the minimum number of cores and the maximum cross-sectional sample one.
10.3 60245IEC 66 (YCW)
Close to the maximum number of cores and a minimum cross section of a sample,
Close to the minimum number of cores and the maximum cross-sectional sample one.
10.4
60245IEC 58 (YS)
60245IEC 58f (YSB)
Any specification of a sample,
2 includes a circular core, the samples should be sent to the circular core 2 1
Member.
10.5
YQ
YQW
YZ
YZW
YZB
YZWB
YC
YCW
JB/T 873
5.2
Sample with approximately minimum number of cores and a maximum cross section,
Sample with approximately maximum number of cores and cross-section of a minimum,
Including ordinary type, flat type, W-type three types, the
When/or include Q, Z, C and three types, 3
Any member of the sample size, the sample should cover model
All types.
Mandatory product cer...
Related standard:   CQC-C0201.06-2014  CQC-C0201-2014
Related PDF sample:   CQC-C0701-2017  CQC-C0901-2016
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2020