HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

CNCA C19-02-2014 English PDF

US$559.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
CNCA C19-02-2014: China Compulsory Certification Implementation Rules - Physical security protection products
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
CNCA C19-02-2014English559 Add to Cart 3 days [Need to translate] China Compulsory Certification Implementation Rules - Physical security protection products CNCA C19-02-2014

PDF similar to CNCA C19-02-2014


Standard similar to CNCA C19-02-2014

GA/T 1368   GA/T 1366   GA/T 1393   

Basic data

Standard ID CNCA C19-02-2014 (CNCA-C19-02-2014)
Description (Translated English) China Compulsory Certification Implementation Rules - Physical security protection products
Sector / Industry China Compulsory Certification (CCC) Implementation Rules
Classification of Chinese Standard A90
Classification of International Standard CNCA Announcement No. 23 of 2014; CNCA Announcement No. 23 of 2014
Word Count Estimation 16,183
Date of Issue 7/16/2014
Date of Implementation 9/1/2014
Older Standard (superseded by this standard) CNCA 10C-054-2009
Quoted Standard GB 10409; GA 374; GA 1051; GB/T 18789; GA 166
Regulation (derived from) CNCA Announcement No. 23 of 2014; CNCA Announcement No. 23 of 2014
Issuing agency(ies) China National Accreditation Administration for Certification and Accreditation
Summary This standard specifies the China Compulsory Certification (CCC) implementation rules for Physical security protection products. This standard defines the Physical security protection products's certification unit; certification entrusting; document requi

CNCA C19-02-2014: China Compulsory Certification Implementation Rules - Physical security protection products


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Number. CNCA -C19-02.2014 Mandatory product certification and implementation rules Physical security protection products Issued on. 2014-07-16 2014-09-01 implementation China Certification and Accreditation Administration Commission issued

table of Contents

0 Introduction 1 1. Scope ..1 2 Certification basis ..1 3 authentication mode ..2 4 .2 division of the authentication unit 5 certified delegate ..2 5.1 certification commission proposed and accepted .. 2 5.2 application data .. 3 5.3 implementation arrangements .. 3 6 .. 3 Certification 6.1 Initial factory inspection 3 6.2 Type tests .. 4 6.3 Evaluation and Certification decisions .. 5 6.4 Time frame for certification .. 5 7 ..5 up inspection 7.1 certified follow-up examination after 5 .. 7.2 production site sample or to check .. 6 7.3 Market sampling test or check .. 6 7.4 up inspection frequency and time 6 7.5 Supervision after the certified record. 6 7.6 up inspection after evaluation of the results 7 8 Certificate ..7 8.1 certificate is valid .. 7 7 8.2 Certificate Content Change 8.3 certificates/extensions .. 7 8.4 certificate cancellation, suspension and revocation .. 7 8.5 Certificate usage .. 8 9 certification mark ..8 9.1 flag style .. 8 9.2 Requirements 8 10 charges .8 11 certification responsibilities ..9 12 Certification Rules ..9 Annex 1. physical security protection products compulsory certification application unit .10 Annex 2. physical security protection products in accordance with the compulsory certification standards and test items ..11 0 Introduction The rules are based on security risks and security certification entity risk protection products to develop, provides Physical security protection products implement mandatory product certification of the basic principles and requirements. The rules and CNCA issued a "compulsory product certification and implementation rules, the company Classification management, authentication mode selection and determination "," compulsory product certification and implementation rules of production enterprises Detection resources and other industry authentication result of the use of "," compulsory product certification and implementation rules factory Check General requirements "and supporting the use of general implementing rules. The certification body should be based on common rules and the implementation of this rule requires the preparation of certification implementation details, and Supporting the implementation of common rules and common implementation of these rules. Manufacturers should ensure that certified products can continue to meet the applicable standards and certification Claim.

1 Scope

This rule applies to resistance within the specified time under specified conditions into the abnormal equipped with a mechanical, Electronic locks cabinet (box) thereof, including the following product categories. (1) security safes Security safes, safes for hotels, ATM machines with security safes, special firearms and ammunition Safe, car safe, put safes, wall safes and other embedded; (2) anti-theft safe Theft safe, hotel fitted with safe, put safes, car safe, wall The type safe. Since laws and regulations or relevant product standards, technology, industrial policy and other factors change Scope caused adjustments should CNCA announcement shall prevail.

2 Certification basis

Certification based on standards, see "Security Physical protection for compulsory certification standards and testing in accordance with item Project "(Annex 2). Should be running the latest version of the national standardization administrative department issued the above criteria in principle. When the need to use other versions of the standard, then the relevant standards should apply to the state commission issued The announcement seeking execution.

3 authentication mode

Basic Authentication security mode implementation entity protection products compulsory certification is. Type test + initial factory inspection + certified follow-up examination after The certification body shall "compulsory product certification and implementation rules production enterprise management, Authentication mode selection and determination "requirements, the production enterprises category management, combined classification Management resulting in increased production site on the basis of the basic authentication mode as appropriate sampling and testing or inspection Charles, market sampling and testing or other tests relevant factors, to determine the principal certification can apply Authentication mode.

4 certification application unit

In principle, commissioned by product type certification of products and security structures and the impact of anti-theft features The key element of energy are the same, namely, design type, but only sales model (eg. different models The only difference between different customers or different sales areas) of different products, can be used Certified as a delegate authentication unit. In the same territory, the same producers of the same product design models by different manufacturers Health Production of non-certified as a unit, but only one type testing of production enterprises Samples, test results can be covered with the other authentication means the product yield different producers Product is not certified as a unit, the test results can not be covered or refer to each other. Certification application unit See "Security entity protection products compulsory certification application unit" (Annex 1).

5 certified delegate

5.1 certification commission proposed and accepted Certification principal needs in an appropriate manner for accreditation commission, the certification body to the accreditation body should Commissioned certification process and certified in accordance with the Regulations of the deadlines or do not accept feedback Admissible information. Not in accordance with national laws and regulations and relevant industrial policies, the certification body shall not accept phase Off certification commission. 5.2 Application Information The certification body should be based on laws, regulations, standards and certification and implementation of the Regulations require certification Clearly lists the application (or application for certification shall include at least contract, certified principal/student Producer/manufacturer registration certificate, etc.). Certification Certification shall be the principal implementing regulations require the applicant to provide the necessary funding lists Material. The certification body is responsible for audit, management, preservation, confidential information, and to verify the information knot If the client informed of certification. 5.3 Implementation Arrangements The certification body and certification should be the responsibility of the principal conventions related parties in the implementation of all aspects of certification Arrangement, and according to their actual production and management of classification, according to the certification rules and implementation details The requirement to determine the specific programs for certification and certification inform the principal.

6 Certification

6.1 Initial factory inspection After the initial factory inspection certification schemes be determined. 6.1.1 Basic Principles The certification body should be clearly entity security protection products producer/production Certification Conditions Corporate quality assurance, product consistency, product standards and basic requirements for compliance control. Certification and principal producer/manufacturer certification shall implement the relevant provisions of the Regulations, building State holding company effective quality assurance, product consistency, product and standard symbols Closing of the control system to ensure that certified products continue to meet certification requirements. For producers, the time has been certified producer/certification body may initial factory inspection Machines and content appropriate adjustments, and clear in certification implementation details. 6.1.2 inspection requirements The certification body shall appoint inspectors compulsory product certification inspection team composed of qualified, press Certified according to the relevant requirements of the Regulations on the production capacity of enterprise quality assurance, product consistency, yield Products and standards compliance checks. Factory site inspection should cover all processing of certified products Place, if necessary, the certification body to be outside the company's premises to check the implementation of the extension. 6.2 Type tests After the initial type testing by performing factory inspection, and also, if necessary, the initial factory inspection Simultaneously. 6.2.1 Type test program The certification body should develop type test program, and inform the client authentication. Type test program includes all the requirements and the number of samples, testing the standard type test Currently, laboratory information. 6.2.2 Type test sample request The certification body should be clearly certified product sampling certification implementing regulations/send samples related to Requirements. Type test samples shall be arranged in accordance with the certification body, to take on-site sampling/sample letters fashion eligible Too. Authentication Client shall ensure the consistency of the sample and the actual production of the product they provide. Certification Institutions and/or laboratory response authentication provided by the client to review the authenticity of the sample. Lab To doubt the authenticity of the sample, it should explain the situation to the certification body, and make the appropriate treatment. 6.2.3 Type test project and requirements Type test item, see "Security Physical protection for compulsory certification standards and testing in accordance with item Project "(Annex 2). Implementation 6.2.4 type testing Type test should be completed by the national commission designated laboratories. Laboratory samples were type Type test, and make a complete record of the whole process of detection and archive retained to ensure that the testing process and Record results traceable. 6.2.5 Type test report The certification body should specify a uniform type test report format. After the type test, the laboratory shall promptly issue a type test report Type test report Shall contain all relevant information related to the authentication unit described in the application. Certification principal should ensure Paul at the follow-up inspection can provide a complete and effective type of test to the certification bodies and law enforcement agencies Inspection reports. 6.3 Evaluation and Certification decisions The certification body for initial factory inspection, type testing conclusions and relevant data/information Comprehensive evaluation, certification decision. To meet the certification requirements, the issuance of the certificates. The existence of Unqualified conclusion, the certification body shall not be approved for Certification, certification terminated. 6.4 Time frame for certification The certification body shall limit certification to make clear that all sectors, and to ensure that related work by Time required to complete the Authentication Client shall actively cooperate in certification activities. Under normal circumstances, Since receiving certification from the commission to the authentication certificate issued by the client within 90 days. 7-up inspection Certified after supervision means supervision of certification bodies for certified products and their manufacturers implemented. Recognized The certification body should be combined with the production of enterprise management and the actual situation in the implementing rules explicitly eligible for certification Specific Requirements Oversight Options Post card. Follow-up examination after 7.1 certified Follow-up inspection principles 7.1.1 Follow-up inspection The certification body should be based on the production and enterprise management, the certified product and its production enterprises Effective implementation of the industry follow-up inspection to verify the manufacturer's ability to continue to comply with the certification of quality assurance Requirements to ensure that certified products meet standard requirements and maintain consistent type test sample Sex. After follow-up examination should be certified in the production of normal production, preference without prior notice Way to check is carried out side. For non-continuous production of products, the certification shall be the principal certification Structure submit production plans, to facilitate follow-up examination after granting the certificate effectively. Tracking check the contents 7.1.2 Follow-up inspection The certification body shall "compulsory product certification and implementation rules factory quality assurance ability to Seeking "combining physical security protection product features to develop follow-up inspection Follow-up inspection requirements of a particular content, And be clear in certification implementation details. 7.2 production site sample or to check 7.2.1 Principles Production site sample to detect or check shall cover all certified products unit. After taking the production site or to check sample embodiment up inspection, certification Clients, producers, production companies should cooperate. 7.2.2 Content The certification body shall establish certification implementation rules in the production site sample detection or seizure Check the content and requirements. As manufacturers have "mandatory product certification rules and testing resources company Use requirements "Other certification results and testing conditions for certification in accordance with requirements of the standard, the certification body Can be used to detect the company resources to implement detection (detection or witness), and recognize the correlation results; As the company does not have the above test conditions, the sample should be sent to the designated laboratory. CB Structure should be clearly detected the use of company resources to implement the detection of specific implementing regulations in certification Requirements and procedures. 7.3 Market sampling test or inspection 7.3.1 Principles Market sampling test or examination should cover a certain percentage of the certified product. Take market sampling test or examination embodiment supervision of certified clients, producers, Production enterprises and should be confirmed with samples taken from the market. 7.3.2 Content The certification body should be a clear market sampling test or check the contents of the authentication implementation details And requirements. 7.4 Frequency and time of follow-up inspection The certification body should be classified on the basis of the company management on the different categories of company With the supervision of certified different frequencies to determine a reasonable time supervision, specific principles should be certified real Shi Conditions to be clear. 7.5 up inspection records The certification body shall record the whole process of follow-up inspection and archive retained to ensure recognition Certification process and results traceable. After 7.6 certified evaluation of inspection results CB certified for follow-up examination after sample detection/inspection findings and relevant information Material/information comprehensive evaluation by the evaluation, can continue to maintain certification, the use of certified Flag; evaluation is not adopted, the certification body should be made to logout/suspend/withdraw certification depending on the situation Processing certificates, and to the public.

8 Certification

8.1 certificate is valid The certificate is valid for 5 years within the validity period, the validity of the certificate dependent on certification After inspection agency inspection. Certificate expiry, the need to continue to use, should be the principal certification certification card Before the expiry of validity of the book commissioned for certification within 90 days. The last time the certificate is valid up inspection The results of the supervision of qualified certification body shall issue a new certificate directly after receiving the certification commission. 8.2 Certificate Content Certificate content should follow the "compulsory product certification regulations," Article XXI to begging. Change 8.3 Certification/expansion Follow-up, when other matters involving certification, product features or certification body hair When students change, the need to expand the client or authentication certificates have been obtained in the range of products covered , The principal certification certification bodies should change/extension commission, change/expansion machine certified After prior approval before implementation. The certification body should be under the premise of risk control, certification implementing rules explicitly change/expansion Exhibition requirements, and change/extend the content document review, inspection and/or inspection (where applicable), After evaluation by only approve the change/extension. 8.4 certificate cancellation, suspension and revocation Cancellation of certificates, suspension and revocation based on "compulsory product certification regulations," and "Compulsory Certification cancellation, suspension, revocation implementing rules" and certification bodies relevant Regulations. The certification body shall determine does not meet the certification requirements and the scope of product categories, and take Be announced in an appropriate manner to be canceled, suspended, revoked certificates. 8.5 Use of certificates Use of the certificates shall comply with the "Regulations for Compulsory Product Certification" requirements.

9 certification mark

Certification mark of the management, use should follow the "Compulsory Certification Mark," the Claim. 9.1 Shape Flag Certified security entity protection products should be safe to use class (S) certification mark, Shape As shown below. 9.2 Requirements You can use national unity printed standard specification mark, may also be molded printing. Use standard certification mark size No. 2-5 No. As the use of molding, printing, should Indicate the manufacture code. Certification mark shall be applied on a prominent position in the housing body products. 10 charges Certification fees by the certification bodies and laboratories accordance with national compulsory product certification The fees prescribed fee. The certification body shall be in accordance with national mandatory product certification fees on initial plant trial Investigation, follow-up inspection to review the number of man-days fee standards, reasonably determine the specific charges man-days number. 11 certification responsibilities Certification bodies and their certification decision made by its personnel should be responsible for certification results. The laboratory shall be responsible for test results and test reports. The certification body and respond appointed factory inspectors responsible for factory inspection. Certification principal responsible for the authenticity of its commissioned information and samples submitted legitimacy. 12 Certification Rules The certification body should be based on the principles and implementation of the requirements of this rule, the development of scientific, reasonable and operable Implementing Rules for certification. Certification Rules shall remain in the national commission for the record announced solid Shi certification implementation rules shall include at least the following. (1) certification process and deadlines; (2) authentication mode selection and related requirements; (3) the production of enterprise management requirements; (4) Data for Certification and requirements; (5) Initial factory inspection requirements; (6) the type test requirements; (7) Follow-up inspection requirements; (8) the use of company resources to implement detection test requirements; (9) Certification change (including standard version) requirements; (10) on the basis of fees and requirements; (11) and technical disputes, complaints related processes and deadlines. attachment1. Physical security protection products compulsory certification application unit No. Product Name cell division

1 security safes

Vault 1. special features, such as investment style security safes, wall embedded anti-theft insurance, Firearms and ammunition Private security safes and ATM machines can not be classified as a special safe in the same unit; 2. The product is not different security levels as a unit; 3. The material structure of different products is not available as a unit; 4. Different types of non-door body as a unit; 5. The use of different lock category (mechanical locks, electronic locks) products not be used as a unit.

2 security safes

1. Special Features safe box, such as a safe investment in anti-theft, anti-theft security wall embedded Box can not be classified as the same unit; 2. The product is not different security levels as a unit; 3. The material structure of different products is not available as a unit; 4. Different types of non-door body as a unit; 5. The use of different lock category (mechanical locks, electronic locks) products not be used as a unit. Annex 2. Physical security protection products in accordance with the compulsory certification standards and test items Product certification according to the standard test items corresponding to the standard terms and conditions Theft Insurance Anti-theft protection Insurance cabinet Product classification and labeling GB 10409 GA 374 Article 4 GB 10409 General requirements Article 5.1 of GB 10409 Structural requirements of Article 5.2 of GB 10409 Mechanical lock requirements of Article 5.3 of GB 10409 Electronic lock requirements GB 10409 Clause 5.4 Power GB 10409 Article 5.5 Additional device GB 10409 5.6 Anti-sabotage requires 5.7 GB 10409 Environmental testing GB 10409 section 5.4.9 Article Static test GB 374 Article 5.8.1 Firearms bomb Private medicine Anti-theft protection Insurance cabinet Product sorting, grading and marking GA 1051 GB 1051 Article 4 General requirements GB 1051 section 5.1 Structural requirements of Article 5.2 of GB 1051 Anti-sabotage requirements of Article 5.3 of GB 1051 Mechanical lock requirements GB 1051 5.4.1 GB 1051 electronic lock requirement 5.4.2, 5.4.3 Power GB 1051 Article 5.5.10 Article Safety requirements GB 1051 Article 5.5.11 Article Static test GB 1051 Article 5.5.12 Article Environmental testing GB 1051 Article 5.5.13 Article ATM machine Theft prevention Vault Product classification and labeling GB 10409 GB/T 18789 GA 374 Article 4 GB 10409 General requirements GB/T 18789 4.1.3 Structural requirements GB/T 18789 Section 4.3 Anti-sabotage requirements GB/T 18789 4.6 Mechanical lock requirements of Article 5.3 of GB 10409 Electronic lock requirements GB 10409 Clause 5.4 Power GB 10409 Article 5.5 Environmental testing GB 10409 section 5.4.9 Article Static test GB 374 Article 5.8.1

2 security safes

Product classification and labeling GA 166 GA 374 GA 166 Article 4 General requirements Article 5.1 of GA 166 GA 166 construction requirements of Article 5.2 GA 166 electronic lock requirements of Article 5.3 Mechanical locks requires GA 166 Section 5.4 Anti-damage claim GA 166 Article 5.5 Environmental testing GB 374 5.7.1 Article Static test GB 374 Article 5.8.1

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of CNCA C19-02-2014_English be delivered?

Answer: Upon your order, we will start to translate CNCA C19-02-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of CNCA C19-02-2014_English with my colleagues?

Answer: Yes. The purchased PDF of CNCA C19-02-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.