|
US$789.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
CJ/T 326-2010: Plastics inspection chambers for sewerage in municipal engineering
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| CJ/T 326-2010 | English | 789 |
Add to Cart
|
6 days [Need to translate]
|
Plastics inspection chambers for sewerage in municipal engineering
| Valid |
CJ/T 326-2010
|
PDF similar to CJ/T 326-2010
Basic data | Standard ID | CJ/T 326-2010 (CJ/T326-2010) | | Description (Translated English) | Plastics inspection chambers for sewerage in municipal engineering | | Sector / Industry | Urban Construction Industry Standard (Recommended) | | Classification of Chinese Standard | P41 | | Classification of International Standard | 91.140.80 | | Word Count Estimation | 32,362 | | Date of Issue | 2010-03-15 | | Date of Implementation | 2010-08-01 | | Quoted Standard | GB/T 1033.1; GB/T 1040.1; GB/T 1040.2; GB/T 3682; GB/T 6284; GB/T 8804.3; GB/T 8806; GB/T 9341; GB/T 9647; GB/T 14152; GB 15558.1-2003; GB/T 17037.1; GB/T 17391; GB/T 18173.3; GB/T 18251; GB/T 18742.1; GB/T 18742.2; GB/T 19472.1; GB/T 19472.2; GB/T 21873; GB/T 23858; GB 50010; GB 50014; GB 50204; CJ/T 233-2006 | | Adopted Standard | prEN 13598-2-2009, NEQ | | Regulation (derived from) | Bulletin of the Ministry of Housing and Urban No. 515; industry standard filing Notice 2010 No. 5 (No. 125 overall) | | Issuing agency(ies) | Ministry of Housing and Urban-Rural Development of the People's Republic of China | | Summary | This standard specifies the municipal drainage with plastic manhole classification and marking, materials, requirements, test methods, inspection rules, marking, labeling, manual, transport and storage. This standard applies to a maximum depth of 7m, long-term water temperature below 40��C, the production of polyethylene and polypropylene plastic manhole. | CJ/T 326-2010: Plastics inspection chambers for sewerage in municipal engineering---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics inspection chambers for sewerage in municipal engineering
Book People's Republic of China urban construction industry standards
Municipal drainage plastic inspection wells
2010-03-15 released
2010-08-01 implementation
Ministry of Housing and Urban-Rural Development, People's Republic of China released
Foreword
This standard reference to the European standard prEN13598.2..2009 "non-pressure buried underground drainage plastic pipe system - unplasticized polyvinyl chloride
(PVC-U), Polypropylene (PP) and Polyethylene (PE) Part 2. Specifications for manholes and manholes for traffic lots and buried installations ".
This standard and the European standard prEN13598.2..2009 "non-pressure buried underground drainage plastic pipe system - unplasticized polyvinyl chloride (PVC-
U), Polypropylene (PP) and Polyethylene (PE) Part 2. Specification of Manhole and Wells for Traffic Locations and Buried Installations
Degree is not equivalent, the main differences are as follows.
--- The maximum depth of the standard inspection well 7m, EN13598.2 maximum depth of 6m;
--- The standard inspection wells do not include raw materials used hard PVC (PVC-U).
This standard Appendix A is informative, Appendix B, Appendix C, Appendix D, Appendix E is a normative appendix.
This standard proposed by the Ministry of Housing and Urban Standard and Design Institute.
This standard by the Ministry of Housing and Urban Water Supply and Drainage Products Standard Technical Committee.
This standard is drafted by. Southwest China Municipal Engineering Design and Research Institute, Sichuan Tianxin Plastic Pipe Co., Ltd.
Participated in the drafting of this standard. Sichuan University, Shanghai Keda Municipal Transportation Design Institute, Shanghai Building Materials Co., Ltd., Fortune, Changzhou hippoplasty
Plastic Co., Ltd., Zhejiang Double-ring Plastic Valve Co., Ltd., Jinde Management Group Co., Ltd., Chengdu, the United States Wo Electrical Technology Co., Ltd. real.
The main drafters of this standard. Luo Wanshen, Zhao Yuanqing, Dai Xing, Cheng Li, Wang Guiheng, Xiao Jun, Xu Minghua, Zhou Minhong, Duan Lian,
Dai Dingchang, Ma Zhongju, Ge Qiyu, Zhou Bai Xing, Zhao Qing Zeng, Wang Shiliang, Zhang Yingzhong.
This standard is released for the first time.
Municipal drainage plastic inspection wells
1 Scope
This standard specifies the classification and marking of plastic inspection wells for municipal drainage, raw materials, requirements, test methods, inspection rules, signs, standard
Sign, instruction manual, shipping and storage.
This standard applies to the maximum depth of 7m, long-term water temperature below 40 ℃, made of polyethylene and polypropylene plastic inspection wells.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. All dated references, which are subsequently owned
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to reach an agreement based on this standard research
Whether you can use the latest versions of these files. For undated references, the latest version applies to this standard.
GB/T 1033.1 Determination of plastic non-foam density - Part 1. Immersion, liquid pyknometer and titration
GB/T 1040.1 Plastics - Determination of tensile properties - Part 1. General
GB/T 1040.2 Determination of tensile properties of plastics - Part 2. Test conditions for molding and extrusion of plastics
GB/T 3682 Thermoplastics melt mass flow rate and melt volume flow rate determination
GB/T 6284 chemical products - Determination of moisture in the general method of dry weight loss method
GB/T 8804.3 thermoplastic plastic pipe tensile properties - Part 3. Polyolefin pipe
Plastics piping systems - Determination of dimensions of plastic parts
GB/T 9341 Plastics Determination of bending properties
Thermoplastics pipe rings - Determination of ring stiffness
Test method for resistance to external shock of thermoplastic pipe GB/T 14152
Buried polyethylene (PE) piping systems for gas - Part 1. Pipes
GB/T 17037.1 Preparation of thermoplastic material injection molded test specimens - Part 1. General principles and multi-purpose test specimens and strips
Preparation
Test method for thermal stability of polyethylene pipe and fittings
GB/T 18173.3 Polymer waterproofing materials - Part 3 Water swelling rubber
GB/T 18251 Polyolefin pipes, fittings and mixed materials Determination of pigment or carbon black dispersion
GB/T 18742.1 Polypropylene piping systems for hot and cold water - Part 1. General
Polypropylene piping systems for hot and cold water GB/T 18742.2 Part 2. Pipe
GB/T 19472.1 Buried polyethylene (PE) structure wall pipe system Part 1. Polyethylene double wall corrugated pipe
GB/T 19472.2 Buried polyethylene (PE) structural wall pipe system Part II. Polyethylene winding structure wall pipe
GB/T 21873 rubber seal to the drain pipe and sewer pipe interface seal material specifications
GB/T 23858 inspection covers
GB 50010 Design code for concrete structures
GB 50014 outdoor drainage design specifications
Acceptance code for construction quality of concrete structures GB 50204
CJ/T 233-2006 plastic drainage wells for construction inspection wells
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of CJ/T 326-2010_English be delivered?Answer: Upon your order, we will start to translate CJ/T 326-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of CJ/T 326-2010_English with my colleagues?Answer: Yes. The purchased PDF of CJ/T 326-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|