HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

CJ/T 184-2012 English PDF

US$759.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
CJ/T 184-2012: Stainless steel-plastic laminated pipe and fitting
Status: Valid

CJ/T 184: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
CJ/T 184-2012English759 Add to Cart 5 days [Need to translate] Stainless steel-plastic laminated pipe and fitting Valid CJ/T 184-2012
CJ/T 184-2003English639 Add to Cart 5 days [Need to translate] Stainless steel-plastic composite pipes Obsolete CJ/T 184-2003

PDF similar to CJ/T 184-2012


Standard similar to CJ/T 184-2012

GB/T 41494   CJ/T 244   CFDA155   CJ/T 186   CJ/T 192   CJJ 184   

Basic data

Standard ID CJ/T 184-2012 (CJ/T184-2012)
Description (Translated English) Stainless steel-plastic laminated pipe and fitting
Sector / Industry Urban Construction Industry Standard (Recommended)
Classification of Chinese Standard P42
Classification of International Standard 91.140.60
Word Count Estimation 29,234
Older Standard (superseded by this standard) CJ/T 184-2003
Quoted Standard GB/T 2828.1-2003; GB/T 2918; GB/T 3682; GB/T 4239; GB/T 6111; GB/T 7307; GB/T 8805; GB/T 8806; GB/T 9647; GB/T 10002.1; GB/T 13663; GB/T 15558.1; GB/T 15820; GB/T 18474; GB/T 18742.2; GB/T 18991; GB/T 19473.2; GB/T 20007.1; CJ/T 175
Regulation (derived from) Ministry of Housing and Urban Notice No. 1285; industry standard filing Notice 2012 No. 4 (No. 148 overall)
Issuing agency(ies) Ministry of Housing and Urban-Rural Development of the People's Republic of China
Summary This standard specifies the stainless steel lined composite pipes and fittings terminology, symbols and abbreviations, classification and nomenclature, conditions, requirements, test methods, inspection rules and signs, packaging, transportation and stora

CJ/T 184-2012: Stainless steel-plastic laminated pipe and fitting

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Stainless steel-plastic laminated pipe and fitting ICS 91.140.60 P42 People's Republic of China urban construction industry standards Replacing CJ/T 184-2003 Stainless steel lined plastic composite pipe and fittings Posted on.2012-02-08 2012-08-01 implementation Ministry of Housing and Urban-Rural Development, People's Republic of China released Directory Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and Definitions, Symbols and Abbreviations 1 3.1 Terms and definitions 2 3.2 Symbols and Abbreviations 2 4 Categories 3 4.1 pipe classification 3 4.2 pipe classification 4 5 conditions of use 4 5.1 prestressed composite stainless steel lined plastic composite pipe system conditions of use 4 5.2 bonded composite stainless steel lined plastic composite pipe system conditions of use 4 6 Requirements 5 6.1 Prestressed composite structure of stainless steel lined with plastic pipe and fittings requirements 5 6.2 adhesive composite structure of stainless steel lined plastic composite pipe requirements 8 7 Test Method 8 7.1 Prestressed composite structure of stainless steel lined with plastic composite pipe and tube test method 8 7.2 bonded composite structure of stainless steel lined plastic composite pipe test method 9 8 Inspection rules 9 8.1 Batch 9 8.2 factory inspection 10 8.3 type test 10 9 logo, packaging, transportation and storage 11 9.1 mark 11 9.2 Packaging 11 9.3 Transportation 11 9.4 Storage 11 Appendix A (Informative) stainless steel lined plastic composite pipe system for hot melt socket connection pipe fittings basic types and structure size 12 Appendix B (Normative) Bonded stainless steel composite plastic composite pipe composite pipe classification, requirements, test methods and factory inspection Rule 16 Appendix C (Normative) Pipe ring average peel strength test method 21 Appendix D (Normative) Vacuum Decompression Test Method 24

Foreword

This standard is written in accordance with the rules given in GB/T 1.1-2009. This standard is CJ/T 184-2003 "stainless steel plastic composite pipe" amendment. Compare with CJ/T 184-2003 main technical content The changes are as follows. --- Added terms and definitions, symbols and abbreviations (see Chapter 3), conditions of use (see Chapter 5). --- Increasing the prestressed composite structure of stainless steel plastic composite pipe and pipe fittings (see 4.1, 4.2), and the connection (see 4.2), Requirements (see 6.1), test methods (see 7.1), inspection rules (see 8.2.2.1, 8.2.2.3) made clear. --- Increased stainless steel lined plastic composite pipe system for hot melt socket connection pipe basic types and structural dimensions (see Appendix A). --- Modify the logo, packaging, transportation and storage and other regulatory requirements (see Chapter 9,.2003 edition of 7). --- Modify the adhesive composite structure of stainless steel lined plastic composite pipe classification (see Appendix B,.2003 edition 3.1). --- Remove the hot and cold cycle test methods (see.2003 edition of Appendix B), pressure cycle test method (see the.2003 edition of the attached C). This standard proposed by the Ministry of Housing and Urban Standard and Design Institute. This standard by the Ministry of Housing and Urban Water Supply and Drainage Products Standardization Technical Committee. This standard is drafted by. Beijing Aerospace Caesar International Investment Management Co., Ltd. Participated in the drafting of this standard. National Chemical Building Materials Testing Center, Beijing Aerospace Caesar System Technology Co., Ltd.. The main drafters of this standard. Jia Zhihua, Wei Ruoqi, Liu Xudong, in Asia, Zhang Nan, Wang Tingting. This standard replaces the standards previously issued. This standard was first released in.2003 and was first revised in.2012. Stainless steel lined plastic composite pipe and fittings

1 Scope

This standard specifies the terms and definitions stainless steel Lv plastic composite pipe and fittings, symbols and abbreviations, classification and naming, conditions of use, to Requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to hot and cold water supply pipes, including industrial and civil hot and cold water, heating, central air conditioning and drinking water and other stainless steel lined with plastic composite pipeline. Taking into account the material's chemical resistance and heat resistance conditions, can be used for a variety of chemical fluids and gas delivery stainless steel lined plastic composite pipe Road system.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2828.1-2003 Sampling procedures for sampling inspection - Part 1. batch acceptance inspection by acceptance quality limit (AQL) sampling plan GB/T 2918 plastic sample conditioning and testing of the standard environment GB/T 3682 Thermoplastics melt mass flow rate and melt volume flow rate determination GB/T 4239 stainless steel and heat-resistant steel cold-rolled strip Thermoplastics pipes for the conveyance of fluids - Pressure resistance test methods GB/T 7307 55 ° non-sealed pipe thread GB/T 8805 rigid plastic pipe bending measurement Plastics piping systems - Determination of dimensions of plastic parts GB/T 9647 plastic pipe resistance to external load test methods GB/T 10002.1 water supply with rigid polyvinyl chloride (PVC-U) pipe GB/T 13663 high-density polyethylene pipe for water supply GB/T 15558.1 Buried polyethylene pipe for gas GB/T 15820 polyethylene pressure pipe and pipe fittings connected pull-pull test GB/T 18474 cross-linked polyethylene (PE-X) pipe and tube cross-linked degree of test methods Polypropylene piping systems for hot and cold water GB/T 18742.2 Part 2. Pipe GB/T 18991 hot and cold water systems with thermoplastic pipes and fittings GB/T 19473.2 Polybutylene (PB) piping systems for hot and cold water use - Part 2. Tubing GB/T.20007.1 acrylonitrile - butadiene - styrene (ABS) pressure piping systems - Part 1. Pipe CJ/T 175 Heat-Resistant Polyethylene (PE-RT) Piping System for Hot and Cold Water 3 Terms and definitions, symbols and abbreviations This standard uses the following terms and definitions, symbols and abbreviations.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of CJ/T 184-2012_English be delivered?

Answer: Upon your order, we will start to translate CJ/T 184-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of CJ/T 184-2012_English with my colleagues?

Answer: Yes. The purchased PDF of CJ/T 184-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version CJ/T 184-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version CJ/T 184-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.