|
US$919.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
CJ/T 152-2016: Light gauge stainless steel press-fittings and grooving fittings
Status: Valid CJ/T 152: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| CJ/T 152-2016 | English | 919 |
Add to Cart
|
6 days [Need to translate]
|
Light gauge stainless steel press-fittings and grooving fittings
| Valid |
CJ/T 152-2016
|
| CJ/T 152-2010 | English | RFQ |
ASK
|
6 days [Need to translate]
|
Light gauge stainless steel press-fittings and grooving-fittings
| Obsolete |
CJ/T 152-2010
|
| CJ/T 152-2001 | English | 879 |
Add to Cart
|
6 days [Need to translate]
|
Stainless steel press-fittings
| Obsolete |
CJ/T 152-2001
|
PDF similar to CJ/T 152-2016
Basic data | Standard ID | CJ/T 152-2016 (CJ/T152-2016) | | Description (Translated English) | Light gauge stainless steel press-fittings and grooving fittings | | Sector / Industry | Urban Construction Industry Standard (Recommended) | | Classification of Chinese Standard | P42 | | Classification of International Standard | 91.140.60 | | Word Count Estimation | 40,420 | | Date of Issue | 2016-12-15 | | Date of Implementation | 2017-06-01 | | Older Standard (superseded by this standard) | CJ/T 152-2010 | | Quoted Standard | GB/T 191; GB/T 223.11; GB/T 223.16; GB/T 223.25; GB/T 223.28; GB/T 223.37; GB/T 223.40; GB/T 223.60; GB/T 223.62; GB/T 223.68; GB/T 1804-2000; GB/T 2100; GB/T 2828.1; GB/T 3098.1-2010; GB/T 3098.2-2015; GB/T 3098.6; GB/T 3098.10; GB/T 3098.15; GB/T 3280 | | Regulation (derived from) | Ministry of Housing and Urban - Rural Development Notice No.1396 of 2016 | | Issuing agency(ies) | Ministry of Housing and Urban-Rural Development of the People's Republic of China | | Summary | This standard specifies the classification and marking of veneer and grooved pipe fittings, structural type and dimensions, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to the nominal pressure of not more than 1.6 MPa, nominal size is not greater than DN300, for the transmission of domestic water (cold water, hot water), drinking water, medical air off, compressed air, emotional gas, gas, fuel and other thin Bi stainless steel pipe fittings with the design, manufacture and acceptance. | CJ/T 152-2016: Light gauge stainless steel press-fittings and grooving fittings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Light gauge stainless steel press-fittings and grooving fittings
ICS 91.140.60
P42
People's Republic of China urban construction industry standards
Replacing CJ/T 152-2010
Thin-walled stainless steel compression and grooved pipe fittings
2016-12-15 release
2017-06-01 Implementation
Ministry of Housing and Urban-Rural Development, People's Republic of China released
Directory
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 classification and marking 2
5 structure type and size 4
6 Requirements 9
7 Test methods 11
Inspection rules 17
9 logo, packaging, transportation and storage 18
Appendix A (Normative) D-type pipe structure type and basic size requirements 20
Appendix B (Normative) S-type pipe structure type and basic size requirements 26
Appendix C (Normative) Grooved pipe structure type and basic size requirements 32
Appendix D (Normative) Pipe fittings and fittings with the outline dimensions 35
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is a revision of CJ/T 152-2010 "thin-walled stainless steel compression and grooved pipe fittings," compared with CJ/T 152-2010,
The main technical changes are as follows.
--- Modify the steel uniform number code, grade and increase the applicable conditions;
--- Increased the nominal size of pressure pipe fittings series;
--- Increased the structure and size of the compression fittings;
--- Increased gas application of the technical requirements and test methods;
--- Increased the color of drinking water and gas pipelines logo requirements;
--- Modify the technical requirements, test methods and other technical content.
This standard proposed by the Ministry of Housing and Urban Standard and Design Institute.
This standard by the Ministry of Housing and Urban Water Supply and Drainage Standardization Technical Committee building centralized.
This standard was drafted. Jiangsu Jinyang Huijia Pipeline System Co., Ltd., Zhejiang Zheng Kang Industrial Co., Ltd., Zhejiang Zhongjie management
Co., Ltd., Zhejiang Fulante Co., Ltd., Zhejiang is with the Tube Co., Ltd., Anhui tube benefits of new materials Technology Co., Ltd., Vickers (Shanghai)
Fluid Technology Co., Ltd., Suzhou Bao Di Pipe Co., Ltd., Guangzhou Meiya Co., Ltd., Zhejiang Li Xing Fluid Machinery Co., Ltd., Anhui
Jinwei Pipe Co., Ltd., China Architectural Design Institute Co., Ltd., China Construction Metal Structure Association Water Supply and Drainage Equipment Branch, China Construction Equipment Co., Ltd.
Decoration Materials Association, Fujian Housing Construction Co., Ltd., Fujian Poly-Construction Development Co., Ltd..
The main drafters of this standard. Yuan Xuefeng, Zhao Li, Cao Yong, Xu Gang, Hu Dajun, Hu Guodong, Shen string, Huang Jiancong, Zhang Yu, Tang Huanmiao, Yang Sanlong,
Zhu Xiangyong, Zhao Jintian, Yu Dongxu, Gao Shenghua, Xiang Binglin, Wei Shengli, Chen Renquan, Huang Jinqiao, Chen Heng.
This standard replaces the standards previously issued as follows.
--- CJ/T 152-2001;
--- CJ/T 152-2010.
Thin-walled stainless steel compression and grooved pipe fittings
1 Scope
This standard specifies the classification and marking of thin-walled stainless steel compression and grooved pipe fittings, structure type and size, requirements, test methods, seized
Rules, marking, packaging, transportation and storage.
This standard applies to the nominal pressure of not more than 1.6MPa, the nominal size of not more than DN300, used to transport domestic water (cold water, hot water),
Drinking water, medical gases, compressed air, inert gas, gas, oil and other thin-walled stainless steel pipe fittings design, manufacture and acceptance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 223.11 steel and alloy chromium content - Visual titration or potentiometric titration
Methods for chemical analysis of iron, steel and alloy - The chromochrome acid photometric method for the determination of titanium content
Methods for chemical analysis of iron, steel and alloy The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.28 Methods for chemical analysis of iron, steel and alloy a-benzoin oxime gravimetric method for the determination of molybdenum content
GB/T 223.37 Methods for Chemical Analysis of Iron, Steel and Alloy Distillation - Indophenol Blue Photometric Method for the Determination of Nitrogen Content
GB/T 223.40 Steel and alloy - Determination of niobium content - Chlorosulphonol S spectrophotometric method
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy - The butyl acetate extraction spectrophotometric method for the determination of phosphorus content
GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium periodate (potassium) photometric method for the determination of manganese content
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium iodate titration method after combustion in tube furnace for the determination of sulfur content
GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without tolerance
GB/T 2100 stainless steel castings technical conditions
GB/T 2828.1 Sampling procedures for inspection - Part 1. Batch inspection sampling plan by acceptance quality limit (AQL)
Mechanical properties of fasteners - Bolts, screws and studs GB/T
Mechanical properties of fasteners nuts
GB/T 3098.6 mechanical properties of fasteners stainless steel bolts, screws and studs
GB/T 3098.10 mechanical properties of fasteners made of non-ferrous metals bolts, screws, studs and nuts
GB/T 3098.15 mechanical properties of fasteners stainless steel nuts
GB/T 3280 stainless steel cold-rolled steel sheet and strip
Corrosion of metals and alloys - Test method for intergranular corrosion of stainless steels GB/T 4334-2008
GB/T 7306.1 55 ° sealing pipe thread - Part 1. Cylindrical internal thread and tapered male thread
GB/T 10125-2012 artificial atmosphere corrosion test salt spray test
GB/T 11170 stainless steel content of multiple elements Determination of spark discharge atomic emission spectrometry (conventional method)
GB/T 17219 drinking water distribution equipment and protective materials safety evaluation criteria
GB/T 19228.3 stainless steel compression pipe fittings - Part 3. O-ring rubber seals
GB/T.20123 Steel - Determination of total carbon and sulfur content High frequency induction furnace combustion infrared absorption method (conventional method)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of CJ/T 152-2016_English be delivered?Answer: Upon your order, we will start to translate CJ/T 152-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of CJ/T 152-2016_English with my colleagues?Answer: Yes. The purchased PDF of CJ/T 152-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version CJ/T 152-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version CJ/T 152-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|