|
US$2719.00 ยท In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email.
CAM-C14-01-2014: China Compulsory Certification Implementation Detailed-Rules - Equipment for crop protection
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| CAM-C14-01-2014 | English | 2719 |
Add to Cart
|
10 days [Need to translate]
|
China Compulsory Certification Implementation Detailed-Rules - Equipment for crop protection
| |
CAM-C14-01-2014
|
Standard similar to CAM-C14-01-2014 CAB 1022 CAB 1023 CAM-14C-01 Basic data | Standard ID | CAM-C14-01-2014 (CAM-C14-01-2014) | | Description (Translated English) | China Compulsory Certification Implementation Detailed-Rules - Equipment for crop protection | | Sector / Industry | Chinese Industry Standard | | Word Count Estimation | 68,689 | | Date of Issue | 9/1/2014 | | Date of Implementation | 9/1/2014 | CAM-C14-01-2014: China Compulsory Certification Implementation Detailed-Rules - Equipment for crop protection
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
CAM-C14-01.2014
Mandatory product certification implementation rules
Plant protection machinery
September 1, 2014 release
September 1, 2014 implementation
Beijing Oriental Keim Quality Certification Center
Plant protection machinery compulsory certification implementation rules
table of Contents
1. Introduction 3
2. Terms and Definitions .. 3
3. Manufacturer Category Principle 5
4. Select the authentication mode 6
5. certification application unit 6
6. Certification Process and Time Frame .6
6.1 Certification Process 6
6.2 Time frame for certification 7
7. certified certification requirements before 7
7.1 Certification commissioned 7
8 7.2 Type tests
7.3 Initial factory inspection (factory quality assurance ability and product consistency check) ..10
7.4 Evaluation of certification results and approval ..11
8. up inspection certification requirements .11
Supervision and frequency selection mode after 8.1 certified .11
Requirements 8.2 certified follow-up inspection 12
8.3 Production site sampling inspection requirements 12
8.4 production site and/or market sampling and testing requirements .13
After 8.5 up inspection to check the number of man-days ..13
8.6 up inspection and approval of the results of the evaluation .13
9. The use of company resources to implement detection testing requirements .14
10. Certification ..14
10.1 validity of the certificate .14
10.2 certificates 14
15 10.3 Certificate of Change
Extended 10.4 certificates 15
10.5 narrowed the scope of certification 16
10.6 suspend certificates, revocation, cancellation and recovery .16
Plant protection machinery compulsory certification implementation rules
Use certificates 10.7 19
10.8 ODM Certification ..19
11. A certification mark ..19
According to claim 19 and 12. The charge
13. and technical disputes, complaints and appeals process and time requirements associated ..19
13.1 Dispute ..20
13.2 Complaints .20
13.3 Appeals ..20
Information ..21 Annex 1 delegate authentication to be submitted
Annex 2 plant protection products and machinery 3C certification of safety-critical parts list 24
Annex 3 Compulsory Certification Factory Quality Assurance Ability ..26
Annex 4 main technical specifications and verification methods ..33
Annex 5-1 product inspection items, methods and qualified indicators - Knapsack Sprayer Duster 36
Annex 5-2 product inspection items, methods and qualified indicators - Knapsack Power Sprayer 37
Annex 5-3 product inspection items, methods and qualified indicators - knapsack sprayer .40
Annex 5-4 product inspection items, methods and qualified indicators - Knapsack Sprayer 42
Annex 5-5 product inspection items, methods and indicators qualified - compression sprayer .43
Annex 5-6 product inspection items, methods and qualified indicators - pedal sprayer .46
Annex 5-7 product inspection items, methods and qualified indicators - smoke machine 47
Annex 5-8 product inspection items, methods and qualified indicators - power sprayer ..50
Annex 5-9 product inspection items, methods and qualified indicators - sprayer spray rod .53
Annex 5-10 product inspection items, methods and qualified indicators - wind Sprayer 55
Annex 5-11 product inspection items, methods and qualified indicators - Pneumatic electric ultra low volume sprayer ..57
Annex 5-12 self-propelled machinery and plant protection products supplementary inspection items, methods and qualified indicators .59
Annex 6 necessary production and testing equipment .61
Annex 7 plant protection machinery key parts and materials .64
Annex 8 key production processes .64
Plant protection machinery compulsory certification implementation rules
1 Introduction
Plant protection machinery compulsory certification implementation details (hereinafter referred to as the Regulations) is based on "compulsory production
Product certification and implementation rules agricultural products "(CNCA -C14-01.2014) (hereinafter referred to as the Implementing Rules) and
Requirements "production enterprise management, authentication mode selection and determination" (CNCA -00C-003) and other rules
Preparation, implementation rules as supporting documents. CB spirit of safeguarding the effectiveness of product certification, product promotion
Quality, service certification and certification risk control principles formulated and promulgated the Regulations of the certification.
The implementation details of the applicable range of products, based on certification as described in rule execution, and in accordance with recognized national certification
Can Regulatory Commission (hereinafter referred to as CNCA ) published catalog to define, catalog real adjustment announcement
Shi adjustment.
Certification Body in accordance with implementing rules, the establishment of production enterprise management system, combined with production enterprises classification,
Clear crop protection mandatory product certification implementation requirements.
2. Terms and Definitions
2.1 Initial factory inspection
The implementation details of the initial inspection of the factory machinery plant protection products, including product consistency checks and
Quality assurance ability in two parts. The evaluation of the conformity of production control in order to ensure production of plant protection
Mechanical protection and for consistency certification body approved products.
2.2 Production enterprise management
The implementation details of the alleged production of enterprise management, refers for the same categories of products manufacturing enterprises, recognize
Certification authorities to ensure the quality of enterprises according to their production capacity, integrity and law-abiding state and quality of the products produced, etc.
Quality-related information in a comprehensive evaluation of the production companies are classified, and thus the production of different types of enterprises
Industry products produced in the implementation of differentiated management certification mode selection and certified after supervision, in order to achieve control
System certification risk, improve the quality and efficiency of the certification activities to ensure that certified products continue to meet the requirements for certification purposes
Mark.
2.3 Basic authentication mode
Basic authentication mode refers to the production of corporate integrity self-discipline, effective management, stable production as the prerequisite to ensure
Security products continue to meet the mandatory requirements of certification standards as the goal, based on product characteristics and risks inherent in the enterprise P
Certification of the basic elements of the combination over the production process using the determined.
Plant protection machinery compulsory certification implementation rules
2.4 Authentication Mode
Authentication mode is the certification body for products produced by the company selected and determined by the specific embodiments identified
Acronym Syndrome mode.
To effectively control certification risk, improve compliance certification results continued to strengthen monitoring requirements, certification bodies
According to their own production companies classified management of the actual situation of not using basic authentication mode of implementation of certification
Authenticated by the risks that may cause the occurrence does not meet the assessment on the basis of the basic authentication mode by
Choose a combination of increasing the level of authentication required elements.
2.5 Production Enterprise (production sites, factories)
The company refers to the field on the final certified products manufacturing, assembly and/or testing and certification mark of
The present implementation details Unless otherwise specified, production sites, factories refer to production enterprises.
Note. The implementation of the rules in the "processing premises" that is present within the definition of place.
2.6 factory inspection
Factory quality assurance ability to evaluate product consistency and product standards and compliance activities conducted
Moving factory inspection ranging product range and place boundaries.
NOTE. The product range is the place boundaries Certification means quality and product certification related sites, departments.
Activities and processes; when manufacturing certified products involves a number of places, the boundaries of the plant premises should be inspected at least package
Including routine tests, applied on the product nameplate and CCC mark places where the link should be to the rest of the place, if necessary
(Such as key processes) for further examination, ie extended inspections.
2.7 Written verification
On the basis of documentary evidence submitted by the validation of the product/system failure over the effectiveness of corrective actions taken
Away.
2.8 Experimental Verification
Prototype based on the test results, the product failed verification process effectiveness of corrective actions taken, if necessary,
Test items should also include verification associated with the project failed.
2.9 site verification
Based on the results of on-site inspection to verify the unqualified/nonconformity corrective action taken by the effectiveness of the process.
2.10 does not meet the general
Accidental, fact slightly Failure to factory quality management system appears.
2.11 major nonconformity
Plant protection machinery compulsory certification implementation rules
Factory quality management system systemic, regional or serious consequences of failure of facts, including not available
The basic production conditions, product consistency check failed, the product key project site inspection failed, repeat
The key process of influencing products quality control problems, leading to accidents due to product defects or product exists
And other security risks.
3. The manufacturer classification principles
3.1 The certification body will production enterprises into A, B, C, D four categories, principles of classification are shown in Table 1;
Table 1. Manufacturer principles of classification
Classification principles
A meet at least the following conditions, the company can be rated as Class A.
1) The initial factory inspection, the last two years follow-up inspection after inspection found no serious nonconformity, and generally does not meet the entry each year
More than two;
2) After nearly two years of follow-up inspection found no detection of nonconformity, national, provincial quality supervision, compulsory recognition
Card checks and other conclusions are "qualified";
3) through quality management system certification;
4) No information relates to unfavorable manufacturing companies and certified product quality responsibility.
B In addition to Class A, Class C, Class D other manufacturers. No quality information for the first time the certified manufacturer.
C of the following problems arise when the company was adjusted to Classification Category C.
1) The initial factory inspection, follow-up inspection after inspection conclusion judged to be "field-proven" in;
2) Follow-up inspection test results as non-critical items unqualified;
3) media exposure of product quality (such as energy efficiency, performance, etc.) there is a problem, and the Department of corporate responsibility, but does not involve suspend, withdraw
Pin certificates;
4) according to manufacturer and product certification related to quality information comprehensive evaluation concluded that the need to adjust for the class C.
D one of the following problems arise when the company was adjusted to Classification Class D.
1) The initial factory inspection, follow-up inspection after inspection conclusions determined as "no-go" of;
2) Follow-up inspection test results for key items unqualified;
3) unjustified refusal CB supervision and inspection and/or sampling;
4) media exposure and the Department of corporate responsibility, a greater impact on product safety can be directly suspended, revoked certificates;
Plant protection machinery compulsory certification implementation rules
5) national, provincial quality supervision, mandatory product certification checks and other conclusions as "unqualified";
6) can not meet the other requirements of compulsory product certification has been suspended, revoked certificates.
3.2 certification bodies to collect, collate and quality certified products and produce various kinds of information about the business, and accordingly
Production enterprises to classify enterprise classification to implement dynamic management. First evaluation once a year, and according to the situation
Timely evaluation certification clients, producers, production companies should cooperate.
3.3 manufacturers classification (category) shall be in accordance with the order of the DCBA stepwise increase, according to ABCD
Order or cross-level progressive decline.
4. Select the authentication mode
Basic authentication mode. Type test + corporate quality assurance and product consistency check + Follow-up inspection
Follow-up examination.
Authentication mode has the following four.
1) basic authentication scheme
2) basic authentication mode production site sample testing or inspection
3) basic authentication scheme or market sampling inspection
4) Basic Authentication mode production site sample testing or inspection or sampling inspection market
Specific certification model based on business classification result of the determination of the monitoring programs implemented.
5. Certification application unit
Partition authentication unit in accordance with certification and implementing rules to implement the specific division basis in accordance with the Regulations in Annex 1
Executed. If the producer/manufacturer of different places or different processing may not be classified as the same unit.
6. Certification Process and Time Frame
6.1 Certification Process
Certification process include. certification commission, acceptance and review of data, fees, program planning, and type testing
Initial factory inspection, evaluation of certification results and approval of certification decision making and follow-up inspection and other links.
Plant protection machinery compulsory certification implementation rules
6.2 Time frame for certification
Time frame for certification means the number of days from the date of signing of the contract until the certificate issuance of the certificates actually happened,
Including application processing time, type testing, factory inspection time, evaluation of certification results and approval time
Room authentication certificates, etc. In general, the authentication time shall not exceed 90 days.
Application processing time is usually 3 days.
When type testing takes 30 days (due to detection of non-conformities, corrective actions and retest
Rooms are not counted), calculated from the receipt of the samples and testing fees.
Factory inspection report for 10 days, the inspectors complete the inspection and receive from the factory to submit
Effective date failed corrective action reports from the calculations.
Evaluating certification results and approving the certificates shall normally not exceed 12 days.
Overseas Certification Program Certification Certification in accordance with the contract execution time frame.
Authentication client, the producer (manufacturer), the manufacturer certification implementation should be actively cooperate
And assistance. Because of certification clients, producers, production companies to complete their own reasons overdue certification activities guide
Caused by authentication timeout, not counted in the time of certification.
7. A certified pre-certification requirements
7.1 Certification commission
7.1.1 certification commission proposed and accepted
Books, paper prepared in accordance with the requirements of the application materials, to provide the necessary information to enterprise information and product certification bodies.
Certification Body in accordance with the relevant requirements of the material for review, and timely notice of acceptance or not accept, or request
Re-certification clients apply for certification after rectification.
7.1.2 Application Information
Certification commission on certification provided by the client information and technical materials in accordance with Annex 1 of these Rules.
After receipt of a valid certification bodies certification commission data, in accordance with the relevant requirements of the accreditation commission materials
Notice compliance audit, the audit results to the data issued by the authentication of the client. If the information does not meet the requirements shall be notified
Certification complements principal.
Certification information provided to deal with the principal responsible for the authenticity.
Plant protection machinery compulsory certification implementation rules
The certification body Certification Certification information provided by the client to manage, save, and confidential and righteousness
Services.
7.1.3 entertained case
One of the following circumstances shall not be accepted.
1) does not comply with national industrial policies;
2) Registration papers certified clients, producers, production enterprises, the business scope covering not recognize
Certified products; lack of legal proof material;
3) to ODM/OEM commissioned certification, did not provide valid ODM agreement, power of attorney and former
Starting copies of certificates (including manufacturers, processing plants and the original certificate holder);
4) the case of other laws and regulations can not be accepted
7.2 Type tests
7.2.1 Type test program
The need for type test certification commission, and the data provided by the client certification after passing the examination,
The certification body should develop type test program, and notifies the client authentication type testing program includes delivery (pumping)
Requirements and the number of test samples, testing standards, test items, and laboratory information and other information specific type
Type test program to determine the following requirements.
a) feeding (pumping) like the principle of
According to the rules of cell division to implement the provisions of Annex 1, select a size for each unit. If the product unit
Products covered by self-propelled, self propelled the product required, the unit other models and select a station. Type
It did not pass the test of the product, re-apply for certification, type test sample taken way.
b) sample request
The certification body in accordance with Annex 2 of the Implementing Rules "Machinery plant protection products 3C certification and safety critical parts Details
Table "Selecting the type test prototype, designated generally the same unit to be certified work pressure, volume, high speed,
Complex product type testing and product certification requires written notification to the principal and the designated test
Room, a written notice should be clearly plant protection machinery manufacturer, model specifications, work pressure and other necessary technology products
specification.
c) the number of samples
Plant protection machinery compulsory certification implementation rules
Normally the number of samples of each type of station 1. Production site sampling, product sampling base piggyback
Not less than 10, no less than the other two products.
d) inspection items and requirements
Project type testing, test methods, qualification indicators see Annex 5 of the Implementing Rules.
Implementation 7.2.2 type testing
Requires acceptance prototype designated laboratories and certification bodies should implement type test. When the test sample
When the machine authenticity doubt, inform the certification body.
Designated laboratories shall present Rules Annex 2 verification test prototype's technical specifications. The results showed that the verification
Prototype and key parts inspection schedule inconsistencies, is a sample delivery problems requiring companies to deliver the samples.
7.2.3 Type test report
Format designated laboratories shall be issued by the certification body inspection reports laboratory and related workers
Deal with them to make content type test report and test conclusions correctness.
7.2.4 type test
7.2.4.1 Test Conclusions
No nonconformity or nonconformities exist after rectification and verification of qualified, type test through, otherwise type
Test is not passed.
7.2.4.2 authentication
Product Verification nonconformity is done by designated laboratories, the authentication mode is determined according to the following conditions.
1) when verified by written materials to correct the effect of non-conformance, verification shall be made in writing;
2) When the verification by the corrective effect of non-conformance tests can and should use experimental verification.
7.2.4.3 verification time
Unqualified items, the company should take corrective action. Written verification, the manufacturer should be 1
Completed within months of rectification, confirmed in writing and submitted material; using experimental verification, the manufacturer shall be 3 months
To complete the rectification within the application and test verification. Client authentication is not within the specified time to complete and submit evidence of rectification
It shall make a written explanation. Not without justification in three months to complete the rectification, according to the type of test does not pass at
Management.
Plant protection machinery compulsory certification implementation rules
7.3 Initial factory inspection (factory quali...
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of CAM-C14-01-2014_English be delivered?Answer: Upon your order, we will start to translate CAM-C14-01-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of CAM-C14-01-2014_English with my colleagues?Answer: Yes. The purchased PDF of CAM-C14-01-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|