|
US$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
BB/T 0045-2021: Molded fiber product. Commerce packaging
Status: Valid BB/T 0045: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| BB/T 0045-2021 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Molded fiber product. Commerce packaging
| Valid |
BB/T 0045-2021
|
| BB/T 0045-2007 | English | 439 |
Add to Cart
|
3 days [Need to translate]
|
Pulp molding product. Commerce packaging
| Obsolete |
BB/T 0045-2007
|
PDF similar to BB/T 0045-2021
Basic data | Standard ID | BB/T 0045-2021 (BB/T0045-2021) | | Description (Translated English) | Molded fiber product. Commerce packaging | | Sector / Industry | Packaging Industry Standard (Recommended) | | Classification of Chinese Standard | A82 | | Word Count Estimation | 13,195 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | BB/T 0045-2021: Molded fiber product. Commerce packaging---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Pulp Molded Products Industrial Packaging)
ICS 55.040
CCSA82
People's Republic of China Packaging Industry Standard
Replaces BB/T 0045-2007
Pulp molding products industrial packaging
2022-02-01 Implementation
Published by the Ministry of Industry and Information Technology of the People's Republic of China
directory
Preface III
1 Scope 1
2 Normative references 1
3 Definition of terms 1
4 Product Category 2
5 Technical Requirements 3
6 Test method 6
7 Inspection Rules 8
8 Marking, packaging, transportation and storage 9
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document replaces BB/T 0045-2007 "Industrial Packaging of Pulp Molded Products". Compared with BB/T 0045-2007, except for the structure
In addition to adjustments and editorial changes, the main technical changes are as follows.
--- Changed the definition of pulp molded products (see 3.1, 3.1 of the.2007 edition);
--- Deleted the terms and definitions of key dimensions (see 3.2 of the.2007 edition);
---Added hot-pressing main mold, hot-pressing auxiliary mold, wet blank, front side, back side, cavity, wool, paste hanging, wrinkle, R angle camber, grid printing,
There are 13 terms and definitions for watermark and halo (see 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 3.10, 3.11, 3.12, 3.13,
3.14);
--- Changed the product classification method and content (see Chapter 4, Chapter 4 of the.2007 edition);
---Added foreign matter impurities, hanging pulp, wrinkles, rough R angle camber, bump points, grid printing, deformation, cutting, watermarking, halo, graphic icon
Record a total of 11 appearance requirements (see 5.1);
--- Changed the requirements for different color spots and cracks (see 5.1, 5.1.2 of the.2007 edition);
--- Changed the requirements for length tolerance, width tolerance, and height tolerance in the specifications and dimensions (see 5.2, 5.1.1 of the.2007 edition);
--- Increased the requirements for flatness and straightness in the specifications and dimensions (see 5.2);
--- Changed the requirements for quality tolerance, moisture content, and pressure resistance in physical and mechanical properties, and changed the requirements for water absorption to those for water resistance
(see 5.3, 5.2 of the.2007 edition);
--- Changed the requirements for chromatic aberration, moving chromatic aberration from appearance to physical and mechanical properties (see 5.3, 5.1.2 of the.2007 edition);
--- Changed the requirements for visual inspection (see 6.1.1, 6.2 of the.2007 edition);
---Added foreign matter impurities, concave and convex points, watermarks, paste hanging, wrinkles, rough R angle camber, grid printing, deformation, cutting, halo, graphic icon
Record a total of 11 appearance test methods (see 6.1.2, 6.1.3, 6.1.4, 6.1.5, 6.1.7);
--- Changed the test methods for the appearance of dissimilar color spots and cracking (see 6.1.3, 6.1.6, 6.2 of the.2007 edition);
--- Changed the test methods for length, width and height (see 6.2.1, 6.2.2, 6.3 of the.2007 edition);
--- Added test methods for flatness and straightness (see 6.2.3);
--- Changed the corresponding range of sample state adjustment and test in standard environment, only physical and mechanical properties test adopts
(see 6.3.1, 6.1 of the.2007 edition);
--- Changed the test methods for quality tolerance, water resistance, color difference, and pressure resistance (see 6.3.2, 6.3.4, 6.3.5, 6.3.6, 6.2,.2007 edition)
6.4, 6.6, 6.7);
--- Changed the content of the inspection rules (see Chapter 7, 7 of the.2007 edition);
--- Changed the requirements for marking, and changed storage to storage (see Chapter 8, Chapter 8 of the.2007 edition).
This document is proposed by China Packaging Federation.
This document is under the jurisdiction of the National Packaging Standardization Technical Committee (SAC/TC49).
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is drafted by. Yongfa (Henan) Molding Technology Development Co., Ltd., Guangzhou Huagong Huanyuan Green Packaging Technology Co., Ltd.,
Dongguan Huilin Packaging Co., Ltd., Yongfa (Jiangsu) Molding Packaging Technology Co., Ltd., Qingdao Yongfa Molding Co., Ltd., Longyan Green Olive
Environmental Science and Technology Co., Ltd.
The main drafters of this document. Chen Junzhong, Gong Jun, Wu Jiaoping, Mo Canliang, Liu Guiyou, Ai Yongzhong, Shen Chao, Zuo Huawei, Chen Yimei, Bin Dongming,
Zhang Lili, Jing Qinyang, Cui Xiaofeng, Liu Fujiao, Yang Xiaolong, Leng Feng, Zhao Zhanwei, Qiu Jianyang.
The previous versions of the documents replaced by this document are as follows.
---BB/T 0045-2007.
Pulp molding products industrial packaging
1 Scope
This document specifies the product classification, technical requirements and tests of pulp molded products for industrial packaging (hereinafter referred to as "pulp molded products").
Methods, inspection rules and marking, packaging, transportation and storage.
This document applies to the design, production and inspection of wet-formed pulp molded products for industrial packaging.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative reference in the text. Among them, the dated reference documents,
Only the edition corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document
document.
GB/T 191 Graphical signs of packaging, storage and transportation
GB/T 462 Determination of Moisture in Analysis Samples of Paper, Cardboard and Pulp
GB/T 1541-2013 Determination of dustiness of paper and cardboard
GB/T 2828.1-2012 Counting Sampling Inspection Procedures Part 1.Lot-by-Lot Inspection Sampling Retrieved by Acceptance Quality Limit (AQL)
plan
GB/T 4857.4-2008 Basic tests for packaging and transport packages - Part 4.Compression and stacking using a pressure testing machine
code test method
GB/T 10739 Standard atmospheric conditions for handling and testing of paper, paperboard and pulp samples
GB/T 12807-1991 Laboratory glass instrument indexing pipette
GB/T 19437 Spectral Measurement and Chromaticity Calculation of Printing Images in Printing Technology
GB/T 24635.3 Product Geometry Specifications (GPS) Coordinate Measuring Machines (CMM) Techniques for Determining Measurement Uncertainty
Part 3.Applying calibrated workpieces or standards
GB/T 34690.2-2017 Printing Technology Offset Printing Digital Process Control Part 2.Operating Environment
3 Definition of terms
The following terms and definitions apply to this document.
3.1
Pulp Molded Productsmoldedfiberproduct
The plant fiber is processed into the proposed structural shape using a mold, and the product is made by finishing and functional processing.
3.2
hot pressing main mold mainheatpressingmold
A mold for pressurizing and heating the wet blank (3.4) to impart the main specifications and quality characteristics of the pulp molded article (3.1).
3.3
A mold that pressurizes, heats and exhausts the wet blank (3.4), and is matched with the concave-convex of the hot-pressing main mold (3.2).
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of BB/T 0045-2021_English be delivered?Answer: Upon your order, we will start to translate BB/T 0045-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of BB/T 0045-2021_English with my colleagues?Answer: Yes. The purchased PDF of BB/T 0045-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version BB/T 0045-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version BB/T 0045-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|