YS/T 897-2024 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 897-2024	RFQ	ASK	3 days	(Chemical analysis method for high purity niobium - Determination of trace element content - Glow discharge mass spectrometry)	Valid
YS/T 897-2013	239	Add to Cart	3 days	Methods for chemical analysis of high purity niobium. Determination of trace impurity element content. Glow discharge mass spectrometry	Obsolete

Basic data

Standard ID: YS/T 897-2024 (YS/T897-2024)
Description (Translated English): (Chemical analysis method for high purity niobium - Determination of trace element content - Glow discharge mass spectrometry)
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H14
Classification of International Standard: 77.120.99
Date of Issue: 2024-10-24
Date of Implementation: 2025-05-01
Older Standard (superseded by this standard): YS/T 897-2013
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the method for determining the content of trace elements in high-purity niobium by glow discharge mass spectrometry. This standard is applicable to the determination of trace element content in high-purity niobium, with a determination range of 0.050mg/kg to 10mg/kg for sulfur, chlorine, and mercury, 0.001mg/kg to 100mg/kg for tungsten and molybdenum, 0.001mg/kg to 300mg/kg for tantalum, and 0.001mg/kg to 50mg/kg for other elements.

YS/T 897-2013: Methods for chemical analysis of high purity niobium. Determination of trace impurity element content. Glow discharge mass spectrometry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of high purity niobium. Determination of trace impurity element content. Glow discharge mass spectrometry ICS 77.120.99 H63 People's Republic of China Nonferrous Metals Industry Standard Methods for chemical analysis of high purity niobium Determination of trace elements Glow Discharge Mass Spectrometry Issued on. 2013-10-17 2014-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard was drafted. Beijing Nonferrous Metal Research Institute, Jinchuan Group Co., Ltd., Dongfang Electric Group Emei Semiconductor Material Limited. The main drafters of this standard. LI Yan-fen, Li Po City, Liu Ying, Sun Zeming, Tong Jian, Li Jidong, Zang Muwen, Li Na, Chengzi Hui, Zhangjiang Feng, Qiu Ping, Qinfang Lin, Wen-ying, Wang Panfeng. Methods for chemical analysis of high purity niobium Determination of trace elements Glow Discharge Mass Spectrometry

1 Scope

This standard specifies the method for determination of trace elements in high purity niobium, the determination of elements in Table 1. This standard applies to the determination of trace elements in high purity niobium. In addition to tantalum, molybdenum, tungsten, outside the range of measurement of the elements 1.0μg/kg ~ 5000μg/kg, the range of measurement of tantalum 1.0μg/kg ~ 300000μg/kg, molybdenum and tungsten measurement range of 1.0μg/kg ~ 100000μg/kg.

2 principle of the method

Sample as the cathode glow discharge, and the surface thereof is sputtered atoms from the sample into the plasma in the glow discharge, is ionized and then Import mass spectrometer for measurement. In each element isotope mass number punishable by default scan points and the integration time of the corresponding peak integration, the Area of peak intensity is obtained. In the absence of a standard sample, according to the instrument computer software "typical relative sensitivity factor" calculated automatically The mass fraction of the elements; when the standard sample is required by the sample in the same assay conditions, the ion source structure and the test conditions Under the standard sample was determined by independent relative sensitivity factor, the application of the relative sensitivity factor to calculate the mass fraction of the elements. Element content measured in mass fraction w (X) dollars, according to equation (1). w (X) = RSF (X/Nb) · IX · ANb INb · AX · W (Nb) (1) Where. w (X) --- analyte concentration, in micrograms per kilogram (μg/kg); RSF (X/Nb) --- correction coefficient of the element X and Nb measured glow discharge under specified conditions; Isotope peak intensity IX --- tested element X, cps; ANb --- Nb isotopic abundance of elements; Isotope peak intensity INb --- Nb elements, cps; AX --- analyte X isotopic abundance; Definition mass fraction w (Nb) --- Nb is 1.00 × 109μg/kg.

3 Reagents and materials

Unless otherwise indicated, the reagents used in the analysis are excellent pure; water used as a water. 3.1 ethanol. 3.2 Argon (φ≥99.999%). 3.3 Hydrofluoric acid (19). 3.4 niobium standard sample, measured elements mass fraction of 50μg/kg ~ 500μg/kg. 3.5 niobium blank samples, measured element quality requirements over the sample under test scores below 10 times.

4 Instrument

4.1 high resolution glow discharge mass spectrometer, under the resolution mode resolution of up to 3000 to 4000, high-resolution mode resolution ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 897-2024_English be delivered?

Answer: Upon your order, we will start to translate YS/T 897-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 897-2024_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 897-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 897-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 897-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.