YS/T 809-2025 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 809-2025	RFQ	ASK	3 days	Copper and copper alloy special-shaped belts for connectors	Valid
YS/T 809-2012	259	Add to Cart	3 days	Copper and copper alloy special-shaped strip for socket connector	Valid

Basic data

Standard ID: YS/T 809-2025 (YS/T809-2025)
Description (Translated English): Copper and copper alloy special-shaped belts for connectors
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H62
Classification of International Standard: 77.150.30
Date of Issue: 2025-04-10
Date of Implementation: 2025-11-01
Older Standard (superseded by this standard): YS/T 809-2012
Issuing agency(ies): Ministry of Industry and Information Technology

YS/T 809-2012: Copper and copper alloy special-shaped strip for socket connector

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Copper and copper alloy special-shaped strip for socket connector ICS 77.150.30 H62 People's Republic of China Nonferrous Metals Industry Standard Connector with copper and copper alloy Shaped Issued on. 2012-11-07 2013-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard was drafted. Beijing Hengtai Golden Eagle Copper Co., Ltd. Copper Copper Chifeng Beijing. The main drafters of this standard. Mo Zhijun, Liu Jianmin. Connector with copper and copper alloy Shaped

1 Scope

This standard specifies requirements for connectors with copper and copper alloy strip shaped, test methods, inspection rules and signs, packaging, transportation, storage, quality The amount of the certificate and contract (or purchase order) content. This standard applies to the processing of electronic connectors industry with copper and copper alloy shaped belt.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. RT Test Method. Test Part 1 GB/T 228.1-2010 metal material tensile GB/T 351 metal material resistivity measurement method GB/T 4340.1 metallic materials - Vickers hardness test - Part 1. Test methods GB/T 5121 (all parts) of copper and copper alloys - GB/T 5231 Wrought copper and copper alloy chemical composition and shape of the product GB/T 8888 heavy non-ferrous metal processing products, packaging, labeling, transportation and storage GB/T 23606 copper embrittlement test methods GB/T 26303.3 copper and copper alloy processing material Dimensions detection methods - Part 3. plate and strip YS/T 478 copper and copper alloy conductivity eddy current testing method YS/T 482 copper and copper alloy analysis photoemission spectroscopy

3 Requirements

3.1 Categories 3.1.1 grade, status, specifications Shaped with grades, status, and shall conform to the specifications in Table 1. Shaped cross-sectional shape with commonly shown in Figure 1. Table grades, status and specifications 1 shaped belt Grade status The total width W mm Thick edge thickness T mm Thin edge thickness t mm Thin edge width C mm A thick edge width mm Bevel angle θ (°) T1, T2, TU1, TU2, TP1, TP2, TAg0.03, TAg0.1 1/4 hard (H01), Semi-hard (H02), Hard (H04) 30 ~ 160 0.3 ~ 2.5 0.8 ~ 3 ~ 3 ~ 400 1205 ~ 45 H62, H65, H70, QSn6.5-0.1 1/4 hard (H01), Semi-hard (H02), Hard (H04) 20 100 0.8 ~ 2.5 ~ 2.0 ~ 0.3 ~ 405 ~ 3 400 ~ 45 TFe0.1 semi-hard (H02) 20 ~ 100 0.8 ~ 2.5 0.3 ~ 2.0 3 ~ 40 5 ~ 40 0 ~ 45 Note. The buyer has other brands, when the state requirements, negotiated by the supply and demand sides. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 809-2025_English be delivered?

Answer: Upon your order, we will start to translate YS/T 809-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 809-2025_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 809-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 809-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 809-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.