YS/T 776-2011 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 776-2011: Aluminum-silicon masteralloy for titanium alloy
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 776-2011	159	Add to Cart	3 days	Aluminum-silicon masteralloy for titanium alloy	Valid

Similar standards

GB/T 2524   GB/T 3620.1   YS/T 744   YS/T 582   YS/T 577   YS/T 777   

Basic data

Standard ID: YS/T 776-2011 (YS/T776-2011)
Description (Translated English): Aluminum-silicon masteralloy for titanium alloy
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H64
Classification of International Standard: 77.150
Word Count Estimation: 6,619
Date of Issue: 2011-12-20
Date of Implementation: 2012-07-01
Regulation (derived from): ?MIIT Announcement 2011 No.43
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the requirements for titanium alloy with aluminum-silicon alloy middle, test methods, inspection rules, signs, packaging, transport, storage, quality certificate and contract (or order form) and so on. This standard applies to the middle of titanium with aluminum-silicon alloy.

YS/T 776-2011: Aluminum-silicon masteralloy for titanium alloy

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Aluminum-silicon masteralloy for titanium alloy ICS 77.150 H64 People's Republic of China Nonferrous Metals Industry Standard Aluminum and silicon alloy for titanium alloy 2011-12-20 release 2012-07-01 Implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the National Committee for Standardization of Nonferrous Metals (SAC/TC243). The drafting of this standard. Baotan Group Co., Ltd., Baoji Titanium Co., Ltd., Baotan Special Metal Co., Ltd., China Nonferrous Metals Is the industry standard measurement quality of the Institute. The main drafters of this standard. Feng Junning, Li Yanhong, Yin Shuxia, Chen Feng, Li Xianjun, Zhang Xianming, Liu Min. Aluminum and silicon alloy for titanium alloy

1 Scope

This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage and quality of aluminum-silicon master alloys for titanium alloys Books and contracts (or orders) and so on. This standard applies to aluminum alloy aluminum alloy.

2 requirements

2.1 grade, chip size specifications Product grade, chip size specifications should be consistent with the provisions of Table 1. Table 1 units are in millimeters Grade size Al-11Si (0.08 to 1.0) x (3 to 15) x (3 to 15) 2.2 Chemical composition The chemical composition of the product shall comply with the provisions of Table 2. Table 2% by mass /% Main element impurity element, no more than Al Si Fe CON Balance 8.0 to 13.0 0.30 0.20 0.20 0.05 2.3 chip size The product shall be supplied as a chip, and the chip size shall comply with the requirements of Table 1, allowing a small amount of sieve and sieve to be present, but the total More than 5.0% of the delivery volume. 2.4 High density inclusions There should be no high density inclusions in the product. 2.5 Appearance quality Product surface should be clean, no visible oil, oxide film and other metals, non-metallic inclusions.

3 test method

3.1 Chemical composition analysis by the supplier's current method, the arbitration analysis method by the supply and demand sides to determine. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 776-2011_English be delivered?

Answer: Upon your order, we will start to translate YS/T 776-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 776-2011_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 776-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.