YS/T 775.3-2011 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 775.3-2011: Methods for chemical analysis of lead anode slime. Part 3: Determination of arsenic content. Potassium bromate titrimetric method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 775.3-2011	159	Add to Cart	3 days	Methods for chemical analysis of lead anode slime. Part 3: Determination of arsenic content. Potassium bromate titrimetric method	Valid

Similar standards

GB/T 3884.2   GB/T 3884.1   YS/T 710.6   YS/T 775.2   YS/T 775.4   YS/T 775.1   

Basic data

Standard ID: YS/T 775.3-2011 (YS/T775.3-2011)
Description (Translated English): Methods for chemical analysis of lead anode slime. Part 3: Determination of arsenic content. Potassium bromate titrimetric method
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H13
Classification of International Standard: 77.120.01
Word Count Estimation: 6,638
Date of Issue: 2011-12-20
Date of Implementation: 2012-07-01
Regulation (derived from): ?MIIT Announcement 2011 No.43
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the method for the determination of arsenic content of lead anode mud. This section applies to the determination of arsenic content of lead anode mud. Measuring range: 1. 00% to 10. 00%.

YS/T 775.3-2011: Methods for chemical analysis of lead anode slime. Part 3: Determination of arsenic content. Potassium bromate titrimetric method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of lead anode slime.Part 3. Determination of arsenic content.Potassium bromate titrimetric method ICS 77.120.01 H13 People's Republic of China Nonferrous Metals Industry Standard Methods for chemical analysis of lead anodes Part 3. determination of arsenic content Potassium bromate titration Part 3. Determination ofarseniccontent- 2011-12-20 release 2012-07-01 Implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China

Foreword

YS/T 775-2011 "lead anode mud chemical analysis method" is divided into seven parts. - Part 1. Determination of lead content - Na2EDTA titration; Part 2. Determination of Bismuth Flame Atomic Absorption Spectrometry and Na2EDTA Titration; - Part 3. Determination of arsenic content - Potassium bromate titration; - Part 4. Determination of antimony content - Flame atomic absorption spectrometry and cerium sulphate titration; - Part 5. Determination of gold and silver; - Part 6. Determination of copper content - Iodometric method; Part 7. Determination of arsenic, copper and selenium - Inductively coupled plasma atomic emission spectrometric method. This section is part 3. This part is drafted in accordance with the rules given in GB/T 1.1-2009. The arbitration analysis of this part and the overlapping range of Part 7 is carried out using the method of this part. This part is the national nonferrous Metals Standardization Technical Committee (SAC/TC243). This part is responsible for drafting units. Shaanxi Dongling Smelting Co., Ltd. This part of the drafting unit. Beijing Nonferrous Metals Research Institute. This part participates in the drafting unit. Tongling Nonferrous Metals Group Holdings Co., Ltd., Hechi City South Nonferrous Smelting Co., Ltd., Tin Mine Mountain flash Star antimony industry limited liability company. The main drafters of this part. Yang Ping, Chen Yunhong, Li Qinmei, Fang Shuqin, Huang Mingshan, Wei Yongbao, Yang Ping, Long Xiaohui. Methods for chemical analysis of lead anodes Part 3. determination of arsenic content Potassium bromate titration

1 Scope

This part of YS/T 775 specifies the determination of arsenic in lead anodic mud. This part is applicable to the determination of arsenic in lead anode mud, the determination range is 1.00% ~ 10.00%.

2 method summary

Samples were dissolved in sulfuric acid, in hydrochloric acid medium, at 40 ℃ ~ 60 ℃, with methyl methyl blue - methyl orange as an indicator, first with cerium sulfate drop Determination of antimony, and then titration of potassium bromate standard titration of arsenic.

3 reagent

Unless otherwise stated, only the reagents identified as analytical reagents and distilled or deionized water or comparable purity were used in the analysis. 3.1 urea. 3.2 Hydrochloric acid (ρ1.19g/mL). 3.3 Sulfuric acid (ρ1.84g/mL). 3.4 Sulfuric acid (1 1). 3.5 methyl orange solution (2g/L). 3.6 times methyl blue solution (1g/L). 3.7 arsenic standard solution. Weigh 1.3203g arsenic trioxide (wAs2O3 ≥ 99.99%, pre-drying at 100 ℃ ~ 105 ℃ 1h, placed in Dryer, cooled to room temperature), placed in 250mL beaker, add 20mL sodium hydroxide solution (200g/L) dissolved to clear, add 100mL water, 10mL sulfuric acid (3.4), cooled to room temperature, into the 1000mL volumetric flask, diluted with water to the mark, mix. This solution 1mL containing 1mg arsenic. 3.8 Cerium Sulfate Solution. c [Ce (SO4) 2 · 4H2O] ≈0.05mol/L. Weigh 20 g of cerium sulfate [Ce (SO4) 2 · 4H2O] 1000mL beaker, add 300mL water, 100mL sulfuric acid (3.4) dissolved completely, cooling, into the 1000mL volumetric flask, with water dilute Release to the scale, mix. 3.9 standard solution of potassium bromate (cKBrO3 ≈ 0.007mol/L). 3.9.1 preparation. Weigh 1.2g potassium bromate in a 500mL beaker, add.200mL water dissolved completely, cooling, into the 2500mL capacity Bottle, diluted with water to the mark, mix. 3.9.2 Calibration. Remove four 10.00 mL of arsenic standard solution (3.7) in 250 mL Erlenmeyer flask, dilute with water to 100 mL, add 20 mL Hydrochloric acid (3.2), heated to 40 ℃ ~ 60 ℃, plus 2 drops of methyl orange solution (3.5) and 4 drops of methyl blue solution (3.6), with potassium bromate standard drops Set the solution titrated to blue and green, that is the end point. The volume difference of potassium bromate standard titration solution (3.9) consumed by parallel calibration does not exceed 0.10 mL. Follow the calibration to do blank test. Calculate the concentration of potassium bromate standard titration solution according to formula (1) Concentration. cKBrO3 = (V1-V0) x 74.923 (1) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 775.3-2011_English be delivered?

Answer: Upon your order, we will start to translate YS/T 775.3-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 775.3-2011_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 775.3-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.