YS/T 775.2-2011 English PDF

US$239.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 775.2-2011: Methods for chemical analysis of lead anode slime. Part 2: Determination of bismuth content. Flame atomic absorption spectrophotometry and Na2EDTA titrimetric method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 775.2-2011	239	Add to Cart	3 days	Methods for chemical analysis of lead anode slime. Part 2: Determination of bismuth content. Flame atomic absorption spectrophotometry and Na2EDTA titrimetric method	Valid

Similar standards

GB/T 3884.2   GB/T 3884.1   YS/T 710.6   YS/T 775.3   YS/T 775.4   YS/T 775.1   

Basic data

Standard ID: YS/T 775.2-2011 (YS/T775.2-2011)
Description (Translated English): Methods for chemical analysis of lead anode slime. Part 2: Determination of bismuth content. Flame atomic absorption spectrophotometry and Na2EDTA titrimetric method
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H13
Classification of International Standard: 77.120.01
Word Count Estimation: 9,977
Date of Issue: 2011-12-20
Date of Implementation: 2012-07-01
Regulation (derived from): ?MIIT Announcement 2011 No.43
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the determination of the amount of bismuth lead anode mud. This standard applies to the determination of the amount of bismuth lead anode mud. Measuring range: 5. 00%-13. 00%.

YS/T 775.2-2011: Methods for chemical analysis of lead anode slime. Part 2: Determination of bismuth content. Flame atomic absorption spectrophotometry and Na2EDTA titrimetric method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of lead anode slime.Part 2. Determination of bismuth content.Flame atomic absorption spectrophotometry and Na2EDTA titrimetric method ICS 77.120.01 H13 People's Republic of China Nonferrous Metals Industry Standard Methods for chemical analysis of lead anodes Part 2. determination of bismuth content Flame Atomic Absorption Spectrometry and Na2EDTA Titration Part 2. Determination ofbismuthcontent- 2011-12-20 release 2012-07-01 Implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China

Foreword

YS/T 775-2011 "lead anode mud chemical analysis method" is divided into seven parts. - Part 1. Determination of lead content - Na2EDTA titration; Part 2. Determination of Bismuth Flame Atomic Absorption Spectrometry and Na2EDTA Titration; - Part 3. Determination of arsenic content - Potassium bromate titration; - Part 4. Determination of antimony content - Flame atomic absorption spectrometry and cerium sulphate titration; - Part 5. Determination of gold and silver; - Part 6. Determination of copper content - Iodometric method; Part 7. Determination of arsenic, copper and selenium - Inductively coupled plasma atomic emission spectrometric method. This section is part 2. This part is drafted in accordance with the rules given in GB/T 1.1-2009. The arbitration analysis of this part of the overlapping content range adopts the method II. This part is the national nonferrous Metals Standardization Technical Committee (SAC/TC243). This part is responsible for drafting units. Shaanxi Dongling Smelting Co., Ltd. This part of the drafting unit. Beijing Mining and Metallurgy Research Institute, Shaanxi Dongling Smelting Co., Ltd. This part participates in the drafting unit. Zhongjin Lingnan Nonferrous Metals Co., Ltd. Shaoguan Smelter, China Metallurgical Huludao Metal Group Company, Zhuzhou Smelter Refining Group Co., Ltd., Henan Yuguang Gold Lead Co., Ltd. Method a main drafters. Chen Diangeng, Yuan Yuxia, Wang Haoying, Che Hongfang, Luo Dani, Gu Li. Method two main drafters. Yan Hui, Li Xue, Luo Lan, Liu Jihong, Duan Yue, Guo Jun, Zhang Ying, Chen Diangeng, Zhang Wei, Xu Lijun. Methods for chemical analysis of lead anodes Part 2. determination of bismuth content Method A Flame Atomic Absorption Spectrometry

1 Scope

This method specifies the determination method of the amount of bismuth in lead anode mud. The method is suitable for the determination of bismuth in lead anode mud, and the determination range is 5.00% ~ 13.00%.

2 method summary

The sample was decomposed with a mixed acid of hydrochloric acid and nitric acid, and tartaric acid was added to the antimony. In the hydrochloric acid medium, at the atomic absorption spectrometer wavelength 223.1 nm, the absorbance of bismuth was measured using an air-acetylene flame.

3 reagent

Unless otherwise stated, only the reagents identified as analytical reagents and distilled or deionized water or comparable purity were used in the analysis. 3.1 Hydrochloric acid (ρ = 1.19 g/mL). 3.2 nitric acid (ρ = 1.42 g/mL). 3.3 Hydrochloric acid (1 19). 3.4 nitric acid (1 1). 3.5 nitric acid (1 25). 3.6 mixed acid. hydrochloric acid nitric acid (3 1). 3.7 tartaric acid solution (200 g/L). 3.8 bismuth standard storage solution. Weigh 1.0000g metal bismuth (wBi ≥ 99.99%), placed in 250mL beaker, add 50mL nitric acid (3.4), low temperature heating to dissolve completely, boil nitrogen removal of the oxide, cooling, with nitric acid (3.5) washing dish and cup wall, into the 1000mL Capacity bottle, diluted with water to the mark, mix. This solution 1mL containing 1mg bismuth. 3.9 Bismuth standard solution. Remove 20.00mL bismuth standard storage solution (3.8) In a.200mL volumetric flask, add 40mL hydrochloric acid (3.1), 10mL tartaric acid solution (3.7), diluted with water to the mark, mix. This solution 1mL containing 100μg bismuth.

4 instruments

Atomic absorption spectrometer, with bismuth hollow cathode lamp. In the best working conditions of the instrument, where to achieve the following indicators can be used. Sensitivity. bismuth characteristic concentration should not be greater than 0.20μg/mL. Precision. 10 times the standard solution with the highest concentration of 10 absorbance, the standard deviation should not exceed 1.0% of the average absorbance, with the most Low concentration of standard solution (not "zero" concentration solution) measured 10 times the absorbance, the standard deviation does not exceed the maximum concentration of standard solution average suction 0.5% of the luminosity. The linearity of the working curve. the working curve is divided into five segments according to the concentration, and the ratio of the absorbance value of the highest section to the minimum absorbance difference should not ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 775.2-2011_English be delivered?

Answer: Upon your order, we will start to translate YS/T 775.2-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 775.2-2011_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 775.2-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.