YS/T 707-2009 English PDF

US$319.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 707-2009: Methods for chemical analysis of ferronickel carbonyl powder. Determination of nickel content. Dimethylglyoxime gravimetric method

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 707-2009	319	Add to Cart	3 days	Methods for chemical analysis of ferronickel carbonyl powder. Determination of nickel content. Dimethylglyoxime gravimetric method

Similar standards

GB/T 3884.2   GB/T 3884.1   YS/T 710.6   YS/T 710.2   YS/T 710.3   YS/T 710.1   

Basic data

Standard ID: YS/T 707-2009 (YS/T707-2009)
Description (Translated English): Methods for chemical analysis of ferronickel carbonyl powder. Determination of nickel content. Dimethylglyoxime gravimetric method
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H13
Classification of International Standard: 77.120.40
Word Count Estimation: 9,983
Date of Issue: 2009-12-04
Date of Implementation: 2010-06-01
Adopted Standard: ISO 6352-1985, MOD
Regulation (derived from): MIIT [2009] No. 66
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the nickel carbonyl iron powder Determination of nickel content. This standard applies to nickel carbonyl iron powder Determination of nickel content. Measuring range: 15% ~ 80%.

YS/T 707-2009: Methods for chemical analysis of ferronickel carbonyl powder. Determination of nickel content. Dimethylglyoxime gravimetric method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of ferronickel carbonyl powder.Determination of nickel content.Dimethylglyoxime gravimetric method ICS 77.120.40 H13 People's Republic of China Nonferrous Metals Industry Standard Nickel carbonyl iron powder chemical analysis Determination of the amount of nickel dimethylglyoxime gravimetric method (ISO 6352. 1985 (1) Ferronickel-Determinationofnickelcontent- Dimethylglyoximegravimetricmethod, MOD) Posted 2009-12-04 2010-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This revised standard adopts ISO 6352. 1985 (1) "Determination of nickel content of nickel-iron dimethylglyoxime gravimetric method." And ISO 6352. 1985 compared to (1), this standard has the following main changes. --- Measurement range from 15% to 60% adjusted to 15% to 80%; --- Specimen sample weight by the 3.9 ~ 4.1g adjusted to 1.000g; --- Canceled Appendix A, determination of mixed nickel content in the filtrate and text merge atomic absorption spectrometry. --- Supplementary terms of quality assurance and control, increasing the repeatability limit. The Standard Appendix A and Appendix B is an informative annex. This standard by the National Standardization Technical Committee of non-ferrous metals and centralized. This standard by the Jinchuan Group Ltd. is responsible for drafting. This standard by the Beijing General Research Institute of Mining and Metallurgy, Beijing Nonferrous Metal Research Institute participated in the drafting. The main drafters. Zhang Zhi hair, dry Yong, Lv Qingcheng, Lin Hsiu-ying, Li Xia, tiger rainbow, in force, Tangshu Fang, Liu. Nickel carbonyl iron powder chemical analysis Determination of the amount of nickel dimethylglyoxime gravimetric method

1 Scope

This standard specifies the method for determination of nickel carbonyl iron powder of nickel content This standard is applicable to the determination of nickel carbonyl iron powder in the amount of nickel. Measuring range. 15% to 80%.

2 Method summary

Mixed acid sample with hydrochloric acid nitric acid, perchloric acid decomposition of ammonia in the medium, nickel dimethylglyoxime to form a red precipitate of nickel dimethylglyoxime. After mixing a precipitate was dissolved acid secondary precipitates were filtered, washed at 150 ℃ electric heated blast drying oven to Constant weight to calculate the amount of nickel. The filtrate was mixed in the amount of nickel were corrected using atomic absorption spectrometry.

3 Reagents

Unless otherwise specified, the reagents were analytical reagent, which is a distilled water or equivalent purity water. 3.1 ammonium hydrogen fluoride. 3.2 acetic acid (1 + 1). 3.3 hydrochloride (ρ1.19g/mL). Hydrochloride 3.4 (1 + 9). Nitrate 3.5 (ρ1.42g/mL). 3.6 nitric acid (1 + 1). 3.7 perchloric acid (ρ1.67g/mL). 3.8 Ammonia (ρ0.90g/mL). 3.9 dimethylglyoxime in ethanol (10g/L), filtered use. 3.10 tartaric acid solution (500g/L), filtered to use. 3.11 mixed acid. hydrochloric acid, nitric acid, water volume ratio 2.1.3. 3.12 Nickel standard solution. Weighed 0.1000g of nickel (Ni mass fraction ≥99.95%), placed in a beaker of 400mL, 20mL of nitric acid was added (3.6), cover On the surface of the dish, low dissolved to a small volume, after cooling water flushed face and Beibi pan, heat to dissolve the salts, cooled to room temperature shifted 1000mL volumetric flask, diluted with water to the mark. This solution 1mL containing 0.1mg nickel.

4 Instrument

4.1 atomic absorption spectrometer (with a nickel hollow cathode lamp). Under optimum working conditions for those who can reach the following indicators can be used. --- Sensitivity. basically the same test solution and measurement solution, features copper concentration should not exceed 0.09μg/mL. --- Precision. standard solution with the highest concentration of 10 times the absorbance measurements, the standard deviation should not exceed the average absorbance of 1.0%; The lowest concentration of standard solution used (instead of "zero" standard solution) absorbance measured 10 times, and the standard deviation should not exceed the maximum concentration 0.5% of the mean absorbance of the standard solution. --- Linear curve. The curve is divided into five sections according to concentration, absorbance difference between the absorbance difference between the highest and the lowest segment of the segment Ratio of not less than 0.80. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 707-2009_English be delivered?

Answer: Upon your order, we will start to translate YS/T 707-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 707-2009_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 707-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.