YS/T 70-2015 English PDFUS$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 70-2015: Blister copper Status: Valid YS/T 70: Historical versions
Basic dataStandard ID: YS/T 70-2015 (YS/T70-2015)Description (Translated English): Blister copper Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: H62 Classification of International Standard: 77.150.30 Word Count Estimation: 7,740 Date of Issue: 2015-04-30 Date of Implementation: 2015-10-01 Older Standard (superseded by this standard): YS/T 70-2005 Quoted Standard: GB/T 8170; YS/T 521.1; YS/T 521.2; YS/T 521.3; YS/T 521.4; YS/T 521.5; YS/T 521.6 Regulation (derived from): Ministry of Industry and Information Technology Announcement (2015 No. 28) Issuing agency(ies): Ministry of Industry and Information Technology Summary: This Standard specifies the blister copper requirements, test methods, inspection rules, marking, packaging, transportation, storage and quality forecasts and single purchase order (or contract) content. This Standard applies to a converter or other methods of production of blister copper, copper fire refining for use. YS/T 70-2015: Blister copper---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Blister copper ICS 77.150.30 H62 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 70-2005 Thick copper 2015-04-30 released 2015-10-01 implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces YS/T 70-2005 "coarse copper", compared with YS/T 70-2005, the main changes are as follows. The contents of As, Pb, Ni and Zn in the three grades Cu99.40, Cu99.00 and Cu98.50 were relaxed. --- the original standard "each piece of coarse copper weight.200kg ~ 1200kg" to "400kg, 600kg, 800kg, 1000kg, 1200kg Five specifications ", and increased the size requirements and appearance of the schematic; --- increase with high gold and silver (Au ≥ 10g/t or Ag ≥ 500g/t) of the volume than the bit-like drilling method; The size of the dies-like particle size increased by 2mm standard sieve, delete the use of magnets to remove iron and iron mixed with the operating procedures; --- the original standard "coarse copper factory, should be accompanied by a small sample ingot" to "thick copper shipments, should promptly notify the demand side." This standard is proposed by the National Committee for Standardization of Nonferrous Metals (SAC/TC243). This standard is responsible for the drafting unit. Daye Nonferrous Metals Co., Ltd., Jiangxi Copper Co., Ltd., Yunnan Copper Co., Ltd. Ltd., Jinlong Copper Co., Ltd., Zhejiang Furun Group Co., Ltd., Yanggu Xiangguang Copper Co., Ltd. Division, Silver Nonferrous Metals Group Co., Ltd. The main drafters of this standard. Zhang Zilin, Hong Xiongwen, Liu Zhengming, Liu Changyong, Zhang Guanghua, Wu Zhiqing, Liao Jiazhang, Sheng Fang, Chen Yingwu, FENG Zhi-bing, WANG Cheng-guo, WANG Yu-bing, HUANG Hong-wei, YAN Hong, ZHAO Yin-ying, LI Cheng-zu, WANG Wei-dong, ZHOU Song-lin, YANG Li-you, HU Xin- Wei Dong. This standard replaced the previous version of the standard release. YS/T 70-1982, YS/T 70-1993, YS/T 70-2005. Thick copper1 ScopeThis standard specifies the requirements, test methods, inspection rules, marking, packaging, shipping, storage and quality forecasts and orders for blister copper (Or contract) content. This standard applies to the converter or other methods produced by the coarse copper, for the copper fire refining.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Representation and Judgment of Numerical Correction Rule and Limit Value of GB/T 8170 YS/T 521 (all parts) Methods for chemical analysis of coarse copper3 request3.1 Product Classification The crude copper is divided into four grades Cu99.40, Cu99.00, Cu98.50, Cu97.50 according to the chemical composition. 3.2 Chemical composition 3.2.1 The chemical composition of crude copper shall comply with the provisions of Table 1. Table 1 Chemical composition of crude copper Grade chemical composition/% Cu is not less than Impurity content, no more than As Sb Bi Pb Ni Zn Cu 99.40 99.40 0.10 0.03 0.01 0.10 0.10 0.05 Cu 99.00 99.00 0.15 0.10 0.02 0.15 0.20 0.10 Cu 98.50 98.50 0.20 0.15 0.04 0.20 0.30 0.15 Cu 97.50 97.50 0.34 0.30 0.08 0.40 - 3.2.2 coarse copper gold, silver content is not specified, but need to be analyzed by batch, reported the results of the analysis. If there are special circumstances, both by the supply and demand Negotiated. 3.3 Physical specifications 3.3.1 coarse copper for the quadrangular body, the outline of the figure shown in Figure 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 70-2015_English be delivered?Answer: Upon your order, we will start to translate YS/T 70-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 70-2015_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 70-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YS/T 70-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 70-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |