YS/T 1115.11-2016 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 1115.11-2016: Methods for chemical analysis of copper ores and tailings—Part 11: Determination of molybdenum content—Thiocyanate spectrophotometric method Status: Valid
Basic dataStandard ID: YS/T 1115.11-2016 (YS/T1115.11-2016)Description (Translated English): Methods for chemical analysis of copper ores and tailings��Part 11: Determination of molybdenum content��Thiocyanate spectrophotometric method Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: D42 Classification of International Standard: 73.060 Word Count Estimation: 6,642 Date of Issue: 2016-07-11 Date of Implementation: 2017-01-01 Regulation (derived from): Notice of the Ministry of Industry and Information Technology (2016 No. 37) Issuing agency(ies): Ministry of Industry and Information Technology Summary: This standard specifies the method for determining the amount of molybdenum in copper ore and tailings. YS/T 1115.11-2016: Methods for chemical analysis of copper ores and tailings—Part 11: Determination of molybdenum content—Thiocyanate spectrophotometric method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Methods for chemical analysis of copper ores and tailings-Part 11. Determination of molybdenum content-Thiocyanate spectrophotometric method ICS 73.060 D42 People's Republic of China non-ferrous metal industry standards Copper ores and tailings - Chemical analysis methods Part 11. Determination of molybdenum content Thiocyanate spectrophotometry Methods for chemical analysis of copperores and tailings Part 11.Determinationofmolybdenumcontent 2016-07-11 released 2017-01-01 implementation Ministry of Industry and Information Technology of the People's Republic of China ForewordYS/T 1115 "Copper ore and tailings chemical analysis method" is divided into the following 14 sections. --- Part 1. Determination of copper content by flame atomic absorption spectrometry; --- Part 2. Determination of lead content by flame atomic absorption spectrometry; --- Part 3. Determination of zinc content by flame atomic absorption spectrometry; --- Part 4. Determination of nickel content by flame atomic absorption spectrometry; --- Part 5. Determination of cobalt content by flame atomic absorption spectrometry; --- Part 6. Determination of cadmium content by flame atomic absorption spectrometry; --- Part 7. Determination of manganese content by flame atomic absorption spectrometry; --- Part 8. Determination of magnesium content by flame atomic absorption spectrometry; --- Part 9. Determination of sulfur content by high-frequency infrared absorption and combustion - potassium iodate titration; --- Part 10. Determination of phosphorus content molybdenum blue spectrophotometry; --- Part 11. Determination of molybdenum content thiocyanate spectrophotometry; --- Part 12. Determination of copper, lead, zinc, nickel, cobalt, cadmium, magnesium and manganese content; Inductively coupled plasma atomic emission spectrometry; --- Part 13. Determination of fluorine content ion selective electrode method and ion chromatography; --- Part 14. Determination of arsenic hydride generation atomic fluorescence spectrometry and potassium bromate titration. This section is YS/T 1115 part 11. This section drafted in accordance with GB/T 1.1-2009 given rules. This part of the National Non-ferrous Metal Standardization Technical Committee (SAC/TC243) centralized. The main drafting units in this section. Beijing Mining and Metallurgy Research Institute, Zijin Mining Group Co., Ltd., Zhejiang Fu Ye Group Co., Ltd.. This section participates in the drafting unit. Beijing Nonferrous Metal Research Institute, Xiamen Zijin Mining and Metallurgical Technology Co., Ltd., China Nonferrous Guilin Mineral Quality Research Institute Co., Ltd., Zhongtiaoshan Nonferrous Metals Group Co., Ltd. The main drafters of this section. Li Min, Yang Chunlin, Lin Cuifang, Chen Zhuhai, Xia Zhenzhu, Liao Jiazhang, Xu Min, Tong Ling, Zhang Yuan, Qiao Xiaofang, Wang Xiaoxia, Wang Li, Zhang Yu. Copper ores and tailings - Chemical analysis methods Part 11. Determination of molybdenum content Thiocyanate spectrophotometry1 ScopeYS/T 1115 provisions of this part of the copper ore and tailings Determination of molybdenum content. This section applies to the determination of molybdenum content of copper ore and tailings. The measurement range of 0.0030% ~ 0.040%.2 method summaryThe sample was dissolved with sodium carbonate-sodium peroxide, leached with water and filtered to separate the molybdenum from most of the elements such as copper, iron, lead, zinc, silver and calcium. In sulfuric acid medium, the copper salt as a catalyst, with thiourea molybdenum reduction pentavalent, molybdenum and thiocyanate to generate orange-red complex, in the spectrophotometric Absorbance was measured at a wavelength of 460 nm and molybdenum content was calculated using the working curve.3 reagentUnless otherwise noted, only reagents identified as analytical grade were used in the analysis, all of which used distilled or deionized water or equivalent purity Water. 3.1 anhydrous sodium carbonate. 3.2 Sodium peroxide. 3.3 Sulfuric acid (p = 1.84 g/mL). 3.4 Sulfuric acid (1 1). 3.5 Sulfuric acid copper sulfate mixed solution Weigh 0.2g copper sulfate (CuSO4 · 5H2O) dissolved in 1L sulfuric acid (3.4). Thiourea solution (50 g/L). 3.7 potassium thiocyanate solution (200g/L). 3.8 Sodium hydroxide solution (200 g/L). 3.9 Sodium hydroxide solution (20 g/L). 3.10 molybdenum standard storage solution Weigh 1.5003g molybdenum trioxide (mass fraction ≥ 99.99%, pre-fired in a 500 ° C muffle furnace 20min and cooled to room temperature in a desiccator), placed in 250mL beaker, 20mL sodium hydroxide solution (3.8), dissolved by heating All, remove, cool to room temperature, transferred to 1000mL plastic volumetric flask, diluted with sodium hydroxide solution (3.9) to the mark, mix well. This solution 1mL contains 1mg molybdenum. 3.11 molybdenum standard solution Pipette 10.00mL molybdenum standard stock solution (3.10) in 1000mL plastic volumetric flask, with sodium hydroxide solution (3.9) diluted to the mark, mix well. 1 mL of this solution contains 10 μg of molybdenum. 3.12 phenolphthalein ethanol solution (10g/L).4 instrumentsSpectrophotometer. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 1115.11-2016_English be delivered?Answer: Upon your order, we will start to translate YS/T 1115.11-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 1115.11-2016_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 1115.11-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
