SN/T 4752-2017 English PDFUS$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 4752-2017: Textile for import and export--Method for quantitative analysis of polyester fiber mixture textiles--Melted microscope projection method Status: Valid
Basic dataStandard ID: SN/T 4752-2017 (SN/T4752-2017)Description (Translated English): Textile for import and export--Method for quantitative analysis of polyester fiber mixture textiles--Melted microscope projection method Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: W55 Word Count Estimation: 14,161 Date of Issue: 2017-05-12 Date of Implementation: 2017-12-01 Regulation (derived from): National Quality Inspection (2017) 228 Issuing agency(ies): General Administration of Customs SN/T 4752-2017: Textile for import and export--Method for quantitative analysis of polyester fiber mixture textiles--Melted microscope projection method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Import and export textiles - Polyester fiber quantitative analysis method Melting/microscopic projection method) People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard Quantitative analysis method for import and export textile polyester fiber Released on.2017-05-12 2017-12-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is under the jurisdiction of the National Certification and Accreditation Administration. This standard was drafted. Guangdong Inspection and Quarantine Technology Center, Wuyi University. The main drafters of this standard. Zhang Xiaoli, Wu Yingzhu, Liang Guan, Huang Haimin, Huang Meilin, Li Konglan, Xie Xiaobo. Quantitative analysis method for import and export textile polyester fiber1 ScopeThis standard specifies the use of a microprojector method in a molten state to contain polyparaphenylene in a blend of non-polyester fibers that have been removed. Two or three of ethylene glycol diester (PET), polytrimethylene terephthalate (PTT) and polybutylene terephthalate (PBT) A quantitative analysis method. This standard applies to the quantitative analysis of textiles and their products containing polyester fibers.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. For dated references, only dated The version applies to this document. For undated references, the latest edition (including all amendments) applies to this document. FZ/T 01057.6 Textile fibre identification test methods - Part 6 melting point method FZ/T 30003-2009 Yield analysis method for cotton-cotton blended products - microprojection3 PrincipleAccording to polyethylene terephthalate (PET), polytrimethylene terephthalate (PTT) and polybutylene terephthalate (PBT) difference in melting point, after melting one or two fibers, the change in the number of fibers and the cross section are measured by microprojector analysis. Product, thus calculating the corresponding percentage content.4 reagentsThe reagents were of analytical grade unless otherwise stated. 4.1 Fire cotton glue. 4.2 Glycerin.5 Instruments and equipment5.1 Micro-melting point instrument. Temperature requirements. the highest temperature is up to 300 ° C, the accuracy is ± 1 ° C, and the magnification is 50 times to.200 times. 5.2 Microprojector. Magnification.200 times to 500 times. 5.3 Haber slicer. 5.4 Blades. 5.5 Wool fiber bundles. 5.6 Slides. 5.7 Cover slips. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 4752-2017_English be delivered?Answer: Upon your order, we will start to translate SN/T 4752-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 4752-2017_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 4752-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |