SN/T 4711-2016 English PDF
Basic dataStandard ID: SN/T 4711-2016 (SN/T4711-2016)Description (Translated English): Guide for standardization of inspection and quarantine informationization Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: A00 Word Count Estimation: 14,168 Date of Issue: 2016-12-12 Date of Implementation: 2017-07-01 Regulation (derived from): State-Quality-Inspection-Accredidation (2016) No.590 Issuing agency(ies): General Administration of Customs SN/T 4711-2016: Guide for standardization of inspection and quarantine informationization---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Inspection and quarantine information standardization work guide) People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard Inspection and Quarantine Informationization Standardization Work Guide Released on December 12,.2016 2017-07-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ContentForeword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Basic Principles 2 5 Organization and responsibilities 2 6 Standard system (repair) and dynamic maintenance 4 7 Standard implementation 8ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed and managed by the National Certification and Accreditation Administration. This standard was drafted. Tianjin Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Information Center of the General Administration of Quality Supervision, Inspection and Quarantine. The main drafters of this standard. Wang Mei, Xu Ning, Fu Wenxin, Sun Yuyou, Xu Shenglin, Kong Bo. Inspection and Quarantine Informationization Standardization Work Guide1 ScopeThis standard specifies the general requirements, organization and responsibilities, standard system (revision) and dynamic maintenance of the inspection and quarantine informationization standardization work. And standard implementation and other content. This standard applies to the management of inspection and quarantine information standards and the formulation and implementation of information standards.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1.1 Standardization Work Guidelines Part 1. Standard Structure and Compilation "Administrative Measures for Entry-Exit Inspection and Quarantine Standards" and "Working Standards for the Entry and Exit Inspection and Quarantine Industry Standard System (Repair)" (National Certification and Approval) Supervisory Committee Document [2012] No. 85)3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Standard standard In order to achieve the best order within a certain range, it is formulated by consensus and approved by recognized institutions for common use and reuse. A normative document. [GB/T.20000.1-2009, definition 2.3.2] 3.2 Normative document A document that defines rules, guidelines, or specified characteristics for various activities or their outcomes. [GB/T.20000.1-2009, definition 2.3.1] Note. “Regulatory documents” are generic terms for documents such as standards, technical specifications, procedures and regulations. 3.3 Regulatory regulation A binding legal document adopted by the authority. [GB/T.20000.1-2009, definition 2.3.6] 3.4 Dynamic maintenance dynamicmaintenance According to the standardization requirements of inspection and quarantine informationization, the collection and processing of relevant data are continuously carried out according to the prescribed principles for specific industry standards. And processing (such as data additions, deletions, and modifications) and incorporating the results into the standard and published process in a timely manner. 3.5 Standard compliance test standardconformancetesting A test activity that measures the degree of conformance between a product's performance metrics and the performance metrics specified in the relevant national or industry standards. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 4711-2016_English be delivered?Answer: Upon your order, we will start to translate SN/T 4711-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 4711-2016_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 4711-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
