SN/T 4115-2015 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 4115-2015: Determination of sulfur compounds in natural gas. Gas chromatography and sulfur chemiluminescence deterctor Status: Valid
Basic dataStandard ID: SN/T 4115-2015 (SN/T4115-2015)Description (Translated English): Determination of sulfur compounds in natural gas. Gas chromatography and sulfur chemiluminescence deterctor Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: E24 Classification of International Standard: 75.060 Word Count Estimation: 6,663 Date of Issue: 2015-02-09 Date of Implementation: 2015-09-01 Quoted Standard: GB/T 13609 Adopted Standard: ASTM D6504-2008, NEQ Regulation (derived from): State-Quality-Inspection-Accreditation [2015] 59 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the sulfide in natural gas by Gas Chromatography - Sulfur Chemiluminescence Detector Method. This standard applies to the determination of sulfide in natural gas, sulfide detection range: 0.01 mg/m ~ 1 000 mg/m. SN/T 4115-2015: Determination of sulfur compounds in natural gas. Gas chromatography and sulfur chemiluminescence deterctor---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Determination of sulfur compounds in natural gas.Gas chromatography and sulfur chemiluminescence deterctor People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard Analytical method for sulfide in natural gas Gas chromatography-sulfur chemiluminescence detector Released on.2015-02-09 2015-09-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard refers to ASTM D5504-08 "Standard Test Method for Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Sulfur Luminescence The technical content of the Detector Act was drafted. This standard is proposed and managed by the National Certification and Accreditation Administration. This standard was drafted. Hainan Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this standard. Wang Yuhua, Wang Junhua, Zhang Yi, Huang Hongxing, Zhao Yajuan. Analytical method for sulfide in natural gas Gas chromatography-sulfur chemiluminescence detector1 ScopeThis standard specifies the gas chromatography-sulfur chemiluminescence detector method for sulfides in natural gas. This standard is applicable to the determination of sulfide in natural gas. The detection range of sulfide is 0.01mg/m3~1000mg/m3.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 13609 Natural Gas Sampling Guidelines3 Method summaryThe samples were measured using a gas chromatograph with a sulfur chemiluminescence detector under certain chromatographic conditions. By retention time Determination of sulfides; quantification by external standard method.4 reagents and materialsThe reagents used in this method were of analytical grade unless otherwise stated. 4.1 Carrier gas High purity nitrogen or helium, purity ≥99.999%, remove moisture, hydrocarbons, oxygen. 4.2 Hydrogen High purity hydrogen, purity ≥99.999%. 4.3 Air Zero-grade air. 4.4 Oxygen High purity oxygen, purity ≥99.75%. 4.5 compressed gas standard Purchase certified compressed gas standards. 4.6 Preparation of mixed standards 4.6.1 The following sulfur compounds are recommended for use in the same mixed standard. hydrogen sulfide (H2S), carbonyl sulfide (COS), methyl mercaptan (CH3SH). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 4115-2015_English be delivered?Answer: Upon your order, we will start to translate SN/T 4115-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 4115-2015_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 4115-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |