SN/T 2672-2010 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 2672-2010: Textile raw materials fineness testing method (diameter). Micro projection
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 2672-2010	259	Add to Cart	3 days	Textile raw materials fineness testing method (diameter). Micro projection	Valid

Similar standards

GB/T 2543.1   GB/T 2910.10   GB/T 2910.1   SN/T 2558.14   SN/T 5694   SN/T 2671   

Basic data

Standard ID: SN/T 2672-2010 (SN/T2672-2010)
Description (Translated English): Textile raw materials fineness testing method (diameter). Micro projection
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: W04
Classification of International Standard: 59.060
Word Count Estimation: 10,170
Date of Issue: 2010-11-01
Date of Implementation: 2011-05-01
Quoted Standard: GB/T 6529; GB/T 8170; GB/T 10685-2007
Regulation (derived from): National Quality Inspection (2010) 582
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the fiber diameter was measured with a projection microscope test methods. This standard applies to imports of textile raw materials in the fiber cross section is circular or nearly circular fiber diameter measurements.

SN/T 2672-2010: Textile raw materials fineness testing method (diameter). Micro projection

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textile raw materials fineness testing method (diameter) .Micro projection People's Republic of China Entry-Exit Inspection and Quarantine Standards Test methods for textile raw materials fineness (diameter) Microscopic projector law Textilerawmaterialsfinenesstestingmethod (diameter) - Microprojection Issued on. 2010-11-01 2011-05-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard. Yanxiang Gang, Jiang winding, Yang Xiuli, Tang Jin, Li Wei. Test methods for textile raw materials fineness (diameter) Microscopic projector law

1 Scope

This standard specifies the test method for determining the fiber diameter with a projection microscope. This standard applies to the import and export of textile raw materials in the fiber cross section is circular or approximately circular fiber diameter measurements.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 6529 Textiles Standard conditioning and testing atmosphere GB/T 8170 repair value expressed about the rules and limit values and judgment GB/T 10685-2007 Test method for wool fiber diameter projection microscopy

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 The average diameter averagediameter The average cross-section of circular or approximately circular fiber longitudinal projection width. 3.2 Laboratory sample laboratorysample According to the provisions taken from the lot sample product unit or part of the material, as a source of the test sample. 3.3 Test samples testsample Samples taken from the lot sample or laboratory sample for a test project, should be representative, and a foot into a test specimen Enough amount. 3.4 Test specimens testspecimen Drawn from the test sample in a sample for testing. 3.5 Multi-point method morepointsmethod The test sample is thoroughly mixed tile is uniform thickness of the fibrous layer, substantially uniform distribution from 16 regions, from the random fiber layer Front and back portions 32 points sample approach. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 2672-2010_English be delivered?

Answer: Upon your order, we will start to translate SN/T 2672-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 2672-2010_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 2672-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.