SN/T 2129-2008 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 2129-2008	199	Add to Cart	2 days	Test method of pull-out force of upper bands from sole of slippers or sandals shoes for export	Obsolete

Similar standards

QB/T 2673   QB/T 2881   HG/T 2876   SN/T 4776   SN/T 4450   SN/T 4134   

Basic data

Standard ID: SN/T 2129-2008 (SN/T2129-2008)
Description (Translated English): Test method of pull-out force of upper bands from sole of slippers or sandals shoes for export
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: Y78
Classification of International Standard: 61.060
Word Count Estimation: 4,454
Date of Issue: 2008-09-04
Date of Implementation: 2009-03-16
Regulation (derived from): Industry standard filing Notice No. 11 of 2008
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the manufacturing process of cold sticky drag, sandals Bangdai pullout force test methods. This standard applies to cold sticky manufacturing process drag, sandals Bangdai pullout force test.

SN/T 2129-2008: Test method of pull-out force of upper bands from sole of slippers or sandals shoes for export

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method of pull-out force of upper bands from sole of slippers or sandals shoes for export Exit inspection and quarantine industry standard book People's Republic of China Export drag, sandals Bangdai pull force test methods Posted 2008-09-04 2009-03-16 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Beijing Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Fujian Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard. Zhou Zhengyu, Wang A positive, Min Bao dry, Hsu Li Kong, Wang, Chang Yu-mei. This standard is the first release of the entry-exit inspection and quarantine industry standards. Export drag, sandals Bangdai pull force test methods

1 Scope

This standard specifies the drag, sandals cold bonding process manufacturing Bangdai pull force test. This standard applies to cold bonding process manufacturing drag, sandals Bangdai pull force test.

2 Terms and definitions

The following terms and definitions apply to this standard. 2.1 The method according to the provisions of the shoe sole parts Bangdai required when pulled from the force.

3 devices

Tensile testing machine. Maximum load is not more than 500N, the minimum resolution value is not more than 1N, the moving speed of 100mm/min ± 5mm/min, And can record the maximum breaking force indicating device.

4 Sample

4.1 Number of specimens Double-doubles. 4.2 Sample Preparation The whole shoe samples to be tested Bangdai cut from the middle. 4.3 Sample adjustment Before the test specimens in the standard ambient temperature of 23 ℃ ± 2 ℃ conditions are adjusted at least 4h.

5 test procedure

5.1 The test shall be at standard ambient temperature of 23 ℃ ± 2 ℃ conditions. 5.2 adjustment test machine zero, set tensile testing machine fixture moving speed of 100mm/min. 5.3 Rally up and down with the holder, the whole shoes are fixed on both sides of the cut corresponding Bangdai. 5.4 Rally start until Bangdai separate sole or sole Bangdai or damage, record the maximum load value, in Newtons (N), to the nearest Bit integer. 5.5 Sample How Bangdai each Bangdai have to be tested.

6 Test Results

6.1 The results of a single test sample. Test sample how Bangdai the lowest pull force test results-oriented test sample. 6.2 Test result. two pairs of shoes for each individual test sample results are expressed, or should the sole Bangdai damage, should be notes. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 2129-2008_English be delivered?

Answer: Upon your order, we will start to translate SN/T 2129-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 2129-2008_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 2129-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.