SN/T 4134-2015 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 4134-2015: Test method for outsole blooming Status: Valid
Basic dataStandard ID: SN/T 4134-2015 (SN/T4134-2015)Description (Translated English): Test method for outsole blooming Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: Y78 Classification of International Standard: 61.060 Word Count Estimation: 6,664 Date of Issue: 2015-02-09 Date of Implementation: 2015-09-01 Quoted Standard: GB/T 7762-2014 Regulation (derived from): State-Quality-Inspection-Accreditation [2015] 59 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the test methods for the use of ozone aging and temperature salt water immersion method to detect the sole blooming. This standard applies to rubber soles blooming tests. SN/T 4134-2015: Test method for outsole blooming---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Test method for outsole blooming People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard Sole frost test method Released on.2015-02-09 2015-09-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed and managed by the National Certification and Accreditation Administration. This standard was drafted. Fujian Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this standard. Tang Zhenhua, Xu Meiji, Lin Wei, Chen Shaohua, Lin Zhiyong, Xu Jingfang, Song Lingqi. Sole frost test method1 ScopeThis standard specifies the test method for detecting the frosting of soles by ozone aging and temperature-resistant salt water immersion method. This standard applies to the test of rubber sole frosting.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 7762-2014 Vulcanized rubber or thermoplastic rubber resistance to ozone cracking static tensile test3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Frosting blooming The phenomenon in which the liquid or solid compounding agent in the compound migrates from the inside to the surface.4 Principle4.1 Ozone aging method Under the ozone environment, the surface of the rubber sole will accelerate the aging, so that unstable substances in the rubber with potential blooming phenomenon will accelerate the tour. Leaving (migration) precipitates and blooming occurs. 4.2 Temperature-resistant salt water immersion method Soak the rubber sole in salt water for a certain period of time, then place it in high and low temperature for a certain period of time, and change it by temperature change. Stabilize the solubility of the substance and observe whether or not the blooming phenomenon and the degree of blooming are evaluated to evaluate the blooming performance.5 Instruments and materials5.1 Ozone aging test chamber 5.1.1 Ozone generator According to 5.2, 5.3, and 5.4 of GB/T 7762-2014, equipped with ozone generating and adjusting and measuring ozone concentration, from ozone The ozone-containing air from the generator is heated in a heat exchanger and then input into the test chamber. 5.1.2 Test chamber The test chamber should be sealed, the temperature control range is 20 ° C ~ 100 ° C, the relative humidity control range is 30% ~ 95%, and can be constant ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 4134-2015_English be delivered?Answer: Upon your order, we will start to translate SN/T 4134-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 4134-2015_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 4134-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |