SN/T 2005.5-2006 English PDFUS$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 2005.5-2006: Determination of polybrominated biphenyls and polybrominated diphenyl ethers in electrical and electromic equipment. Part 5: HPLC/MS-MS method Status: Valid
Basic dataStandard ID: SN/T 2005.5-2006 (SN/T2005.5-2006)Description (Translated English): Determination of polybrominated biphenyls and polybrominated diphenyl ethers in electrical and electromic equipment. Part 5: HPLC/MS-MS method Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: L04 Classification of International Standard: 31.020 Word Count Estimation: 8,850 Date of Issue: 2006-08-28 Date of Implementation: 2007-03-01 Regulation (derived from): ?National-accreditation-Science [2010] 50 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the electrical and electronic products, polybrominated biphenyls and polybrominated diphenyl ethers performance liquid chromatography tandem mass spectrometry (HPLC/MS-MS) method. This standard applies to electrical and electronic products, polybrominated biphenyls and polybrominated diphenyl ethers determination. SN/T 2005.5-2006: Determination of polybrominated biphenyls and polybrominated diphenyl ethers in electrical and electromic equipment. Part 5: HPLC/MS-MS method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Determination of polybrominated biphenyls and polybrominated diphenyl ethers in electrical and electromic equipment. Part 5. HPLC/MS-MS method Book of the People's Republic of China Entry and Exit Inspection and Quarantine Polybrominated biphenyls and polybrominated diphenyl ethers in electrical and electronic products Determination of Part 5. High Performance Liquid Chromatography Tandem Mass Spectrometry Released on.2006-08-28 2007-03-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordThis part is the fifth part of SN/T 2005. Appendix A of this part is a normative appendix, and Appendix B is an informative appendix. This part is proposed and managed by the National Certification and Accreditation Administration. This part is drafted by the Ningbo Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Shenzhen Entry-Exit Inspection and Quarantine The Bureau of Zhejiang Entry-Exit Inspection and Quarantine of the People's Republic of China participated in the drafting. The main drafters of this section. Shi Jun, Li Zuoqing, Yu Xuezhen, Yin Juyi, Li Lijun, Liu Li, Zhou Min. This section is the first industry standard for entry-exit inspection and quarantine. Polybrominated biphenyls and polybrominated diphenyl ethers in electrical and electronic products Determination of Part 5. High Performance Liquid Chromatography Tandem Mass Spectrometry1 ScopeThis part of SN/T 2005 specifies high performance liquid chromatography-tandem mass spectrometry for polybrominated biphenyls and polybrominated diphenyl ethers in electrical and electronic products. (HPLC/MS-MS) assay method. This section applies to the determination of polybrominated biphenyls and polybrominated diphenyl ethers in electrical and electronic products.2 Method summaryAfter ultrasonic extraction, the samples were analyzed by liquid chromatography-tandem mass spectrometry and quantified by external standard method.3 reagents and materialsUnless otherwise specified, the reagents used were of analytical grade and the water was distilled water. 3.1 Toluene. chromatographically pure. 3.2 Methanol. Chromatographically pure. 3.3 Isopropanol. chromatographically pure. 3.4 Polybrominated biphenyls standard solution. 3.5 Polybrominated diphenyl ethers (PBDEs) standard solution. 3.6 Preparation of standard solution Transfer the appropriate volume of standard solution of PBB and PBDE at a concentration of 50μg/mL, dilute with isopropyl alcohol, and configure to the desired concentration. Standard solution of degree.4 Instruments and equipment4.1 Liquid Chromatography-Tandr Mass Spectrometry (HPLC/MS-MS), APCI ion source. 4.2 Ultrasonic extractor. 4.3 Sample Crusher. 4.4 Centrifuge.5 sample preparationThe sample separated in the electrical and electronic products is cut into small pieces, and after liquid nitrogen is frozen, it is pulverized into a particle size of less than 1 mm by a sample pulverizer. Particles.6 Analysis steps6.1 Extraction of PBB狊 and PBDE狊 Accurately weigh 0.5g (accurate to 0.1mg) of the pulverized sample in a glass centrifuge tube, add 5.0mL of toluene (3.1), ultrasonic extraction After 12 min, it was filtered into a 5.0 mL volumetric flask and made up to volume with toluene (3.1). Pipette 100 μL of sample extract and dilute to the mobile phase to 1.0 mL, filtered through a 0.45 μm filter, and determined by HPLC/MS-MS. The method does not need to be purified, and the sample liquid can be purified by excessive impurities, and the extraction and purification methods are shown in Appendix A. ...... |
