SN/T 2002-2013 English PDFUS$319.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 2002-2013: Determination of certain hazardous substances in electrical and electronic equipment. Conformity assessment Status: Valid SN/T 2002: Historical versions
Basic dataStandard ID: SN/T 2002-2013 (SN/T2002-2013)Description (Translated English): Determination of certain hazardous substances in electrical and electronic equipment. Conformity assessment Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: L04;G04 Classification of International Standard: 71.040; 31.020 Word Count Estimation: 12,140 Older Standard (superseded by this standard): SN/T 2002-2006 Quoted Standard: SN/T 2000-2013; SN/T 2001.1 Regulation (derived from): National quality recognition (2013) 569 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the implementation of hazardous substances in electrical and electronic products conformity assessment procedures and technical requirements. This standard applies to the design of rated voltage not exceeding 1000V, 1500V DC does n SN/T 2002-2013: Determination of certain hazardous substances in electrical and electronic equipment. Conformity assessment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Determination of certain hazardous substances in electrical and electronic equipment. Conformity assessment People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 2002-2006 Detecting electrical and electronic products for hazardous substances Conformity Assessment Issued on. 2013-11-06 2014-06-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard SN/T 2002-2006 "electrical and electronic products for hazardous substances detected conformity assessment." This standard compared with SN/T 2002-2006, in addition to editorial changes outside the main technical changes are as follows. --- Revised introduction (see Introduction, 2006 edition of the Introduction); --- Modify the scope of application (see Chapter 1, Chapter 1 of the 2006 edition); --- Modify the normative references and the introductory phrase of terms and definitions (see Chapter 2, Chapter 3, 2006 edition of Chapter 2, Chapter 3); --- Increasing the term "Electronic and Electrical Products" and "hazardous substances" (see 3.1, 3.3); --- The full text of the "relevant provisions" to "requirements", and modify the definition (see 3.2,2006 version 3.1); --- Modify the term "conformity assessment" is defined (see 3.4,2006 version 3.2); --- Increasing the term "Declaration of Conformity" (see 3.7); --- Modify the definition of the term "material declaration" (see 3.8,2006 version 3.5); --- Modify the "limited" is defined (see 3.10,2006 version 3.9), delete the term "exemption limit" (see the 2006 version 3.10); --- Increasing the term "limited exemptions" (see 3.11), to delete the term "conditional exemptions" (see 2006 version 3.8); --- Amend the definition of "full exemption Project" (see 3.12,2006 version 3.7); --- Amend the definition of "exempt unit" (see 3.13,2006 version 3.6); --- Increasing the term "limited exemption unit," "fully exempt unit" (see 3.14,3.15) --- The full text of "documents" to "technical document" and modify the definition (see version 3.5,4.4,2006 4.4,5.4); --- Will "evaluate the effectiveness of supporting documents" section is incorporated into the corresponding provisions of the "technical document" and revised the requirements (see 4.4, 2006 edition of 4.4.1,4.4.2,4.4.3); --- Add "Declaration of Conformity", "certification" as a technical document (see 4.4); --- Modify the "Conformity Assessment Flow Chart" (see Fig. 1, 2006 edition of the FIG. 1); --- Modified "cell division" and content "disposition classification" (see 5.2,5.3,2006 version 5.2, 5.3); --- The "proof of the validity of the evaluation" to "assess the effectiveness of technical information documents" (see 5.4,2006 version 5.4); --- In "conformity assessment procedures" added "test" requirement (see 5.5); --- The "limit of determination test items," "limited exemptions limit of determination", "full exemption limit of determination project," "detection Evaluation units "into the" evaluation of the detection unit "(see the edition of 5.6,2006 5.5,5.6,5.7,5.8.1); --- Revised "exemption unit evaluation" of content (see 5.7,2006 version 5.8.2); --- The "evaluation of the whole" to "product conformity assessment" (see 5.8,2006 version 5.9); --- Modify the "Conclusions terms" format (see 7.2,2006 version 7.2); --- Deleted Appendix A (2006 edition Appendix A), to increase the "Reference" (see "References"). This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard is drafted by. People's Republic of China Guangdong CIQ. Participated in the drafting of this standard. People's Republic of China Exit Inspection and Quarantine, Ningbo, Shenzhen, People's Republic of China Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Zhejiang People's Republic of China, People's Republic of China State Shanghai CIQ. The main drafters of this standard. Shaw before, how heavy Hui, Zhou Min, Chen Jianguo, Liu Zhihong, Xu Beibei, Wuliao blue, Zheng Jianguo, Dicui Ping, Liu Yingfeng, Huang Li Na, Li Jianguo, Wei Wenfeng. This standard replaces the standards previously issued as follows. --- SN/T 2002-2006.IntroductionWith the number of domestic and limit the use of hazardous substances in electrical and electronic products in the laws and regulations promulgated and implemented, electrical and electronic production Product manufacturers, suppliers, buyers, testing organizations and government regulators have put forward for related products comply with hazardous substances Evaluation requirements. A wide range of electrical and electronic products, material complexity, conformity assessment process need to organize a number of technical documents, on which the relevant information into the Line collation, analysis and judgment. To ensure the consistency of conformity assessment results, the need for clear, uniform, workable technical standards as guide. This standard specifies the implementation of conformity assessment procedures, defined the technical requirements for all aspects of the evaluator can handle and regulate accordingly Evaluation of information from technical documents, the final product obtained was evaluated for compliance with the requirements of the conclusions. Detecting electrical and electronic products for hazardous substances Conformity Assessment1 ScopeThis standard specifies the implementation of electrical and electronic goods and hazardous substances conformity assessment procedures and technical requirements. This standard applies to the design rated voltage not exceeding 1000V, 1500V DC does not exceed the electrical and electronic products. Said apparatus Components, parts, components, materials are also applicable to this standard.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. SN/T 2000-2013 General electrical and electronic equipment to detect hazardous substances SN/T 2001.1 electrical and electronic equipment to detect mechanical split hazardous substances - Part 1. General requirements3 Terms and DefinitionsSN/T 2000-2013, SN/T 2001.1 and define the following terms and definitions apply to this document. For ease of use, the following Repeat lists SN/T 2000-2013, SN/T 2001.1 Some terms and definitions. 3.1 Electronic and Electrical Products electricalandelectronicequipment Normal work needs to rely on current or electromagnetic fields, for the completion of at least one specific function, and equipment for the generation, transmission and measurement These currents and magnetic fields. [SN/T 2000-2013, Definition 3.1] 3.2 Requirements specifiedrequirement Express needs or expectations. NOTE. If regulations, standards and technical specifications and other documents explicitly require the use of restriction of hazardous substances in electrical and electronic products. [SN/T 2000-2013, the definition 3.2] 3.3 Toxic and hazardous substances hazardoussubstances Restrict ingredients used in electrical and electronic products, according to requirements. [SN/T 2000-2013, the definition 3.3] 3.4 Conformity Assessment conformityassessment Requirements to confirm the content of hazardous substances in electrical and electronic products are satisfied. [SN/T 2000-2013, the definition 3.5] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 2002-2013_English be delivered?Answer: Upon your order, we will start to translate SN/T 2002-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 2002-2013_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 2002-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 2002-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 2002-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
