SN/T 1824-2006 English PDF
Basic dataStandard ID: SN/T 1824-2006 (SN/T1824-2006)Description (Translated English): Rules for the rrandom inspection on the import and export mechanical and electrical commodities which are not subject to the compulsory inspection by the commodity inspection authorities Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: A00 Classification of International Standard: 01.120 Word Count Estimation: 9,960 Date of Issue: 2006-11-10 Date of Implementation: 2007-05-16 Quoted Standard: GB/T 2829; GB/T 15239; SN/T 0002 Regulation (derived from): Chinese industry standards for record 2007 of 3 (total of 87) Issuing agency(ies): General Administration of Customs Summary: This standard specifies requirements for heterogeneous test must be approved import and export commodities inspection of import and export of electromechanical products except for a random inspection of the job requirements. This standard applies must be approved import and export commodity inspection authorities electromechanical products import and export of goods outside a random inspection. SN/T 1824-2006: Rules for the rrandom inspection on the import and export mechanical and electrical commodities which are not subject to the compulsory inspection by the commodity inspection authorities---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rules for the rrandom inspection on the import and export mechanical and electrical commodities which are not subject to the compulsory inspection by the commodity inspection authorities Book of the People's Republic of China Entry and Exit Inspection and Quarantine Other than import and export commodities that must be inspected by the commodity inspection agency Import and export mechanical and electrical commodity inspection and inspection specifications Released on.2006-11-10 2007-05-16 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordAppendix A of this standard is a normative appendix, and Appendix B is an informative appendix. This standard is proposed and managed by the National Certification and Accreditation Administration. This standard was drafted. Jilin Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Fujian Entry and Exit Inspection of the People's Republic of China Epidemic situation. The main drafters of this standard. Li Cheng, Wei Yuyou, Sun Yan, Lin Biao. This standard is the first industry standard for entry-exit inspection and quarantine. Other than import and export commodities that must be inspected by the commodity inspection agency Import and export mechanical and electrical commodity inspection and inspection specifications1 ScopeThis standard stipulates the import and export of electromechanical products other than import and export commodities that must be inspected by the commodity inspection authorities (hereinafter referred to as “external catalogue electromechanical” Goods") The work requirements for spot checks. This standard is applicable to the spot check and inspection of import and export electromechanical commodities other than import and export commodities that must be inspected by the commodity inspection authorities.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB/T 2829 Cycle Inspection Counting Sampling Procedures and Tables (Applicable to Inspection of Process Stability) GB/T 15239 isolated batch counting sampling inspection procedure and sampling table Basic requirements for the preparation of SN/T 0002 import and export electromechanical commodity inspection procedures Implementation Regulations of the Import and Export Commodity Inspection Law (State Council Order No. 447) Re-inspection Measures for Import and Export Commodities (Order No. 77 of the General Administration of Quality Supervision, Inspection and Quarantine)3 Terms and definitionsGB/T 2829, GB/T 15239, SN/T 0002 established and the following terms and definitions apply to this standard. 3.1 To determine the suitability of a particular type of product, to take samples from it, to determine, inspect, test or measure one or more characteristics of the sample, and Specify activities that require comparison. 3.2 In order to carry out the inspection and inspection, the collection of the same brand and the same specifications of the import and export of electromechanical products produced by the same producer, Jane Called the batch.4 spot check inspection plans and plans4.1 The General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China shall determine, adjust and publish the types of regional and import and export electromechanical products that are subject to random inspection and inspection each year. Formulate and issue an annual spot check and inspection plan. 4.2 The special agency designated by the General Administration of Quality Supervision, Inspection and Quarantine shall formulate the “Import and Export Inspection and Inspection Plan for Import and Export of Electromechanical Products” according to the types of commodities (below) Referred to as "spot inspection and inspection program"). 4.3 The inspection and quarantine institutions directly under the Ministry of Quality Supervision, Inspection and Quarantine shall, in accordance with the random inspection and inspection plan and the random inspection and inspection plan, The actual implementation of relevant import and export commodities in the region, formulate specific implementation plans (hereinafter referred to as “implementation plan”), and report to the national quality supervision and inspection The General Administration of Plague is on record. See Appendix A for how to develop an implementation plan. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1824-2006_English be delivered?Answer: Upon your order, we will start to translate SN/T 1824-2006_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1824-2006_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1824-2006_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
