SN/T 1730.8-2014 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 1730.8-2014: Safety performance test for export fireworks and firecrackers - Part 8: Product dose
Status: Valid

SN/T 1730.8: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 1730.8-2014	159	Add to Cart	3 days	Safety performance test for export fireworks and firecrackers - Part 8: Product dose	Valid
SN/T 1730.8-2006	199	Add to Cart	2 days	Export fireworks safety performance test methods - Part 8: Products dose detection	Obsolete

Similar standards

GB/T 3634.2   GB/T 3634.1   SN/T 1732.20   SN/T 1730.9   SN/T 1730.10   

Basic data

Standard ID: SN/T 1730.8-2014 (SN/T1730.8-2014)
Description (Translated English): Safety performance test for export fireworks and firecrackers - Part 8: Product dose
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: G89
Classification of International Standard: 71.100.30
Word Count Estimation: 6,641
Date of Issue: 12/1/2014
Date of Implementation: 5/1/2015
Older Standard (superseded by this standard): SN/T 1730.8-2006
Regulation (derived from): State-Quality-Inspection-accreditation [2014] 614
Issuing agency(ies): General Administration of Customs

SN/T 1730.8-2006: Export fireworks safety performance test methods - Part 8: Products dose detection

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Export fireworks safety performance test methods - Part 8. Products dose detection People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard Export fireworks and firecrackers safety performance test method Part 8. Product Dosage Testing Released on.2006-01-26 Implementation of.2006-08-16 People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued

Foreword

SN/T 1730 "Safety Performance Test Method for Export Fireworks and Firecrackers" is divided into. --- Part 1. General; --- Part 2. 75 ° C thermal stability test; --- Part 3. Low temperature stability test; ---Part 4. Anti-vibration test; --- Part 5. Drop test; --- Part 6. Explosion test; --- Part 7. Packaging identification; --- Part 8. Product drug testing; --- Part 9. Aphorism label inspection; --- Part 10. Use safety performance test. This part is part 8 of the SN/T 1730. This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Jiangxi Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this section. Wu Jinsong, Gui Jiaxiang, Lu Zhong, He Xiaohua, Li Dedian, Zeng Shaohua. This section is the first industry standard for entry-exit inspection and quarantine. Export fireworks and firecrackers safety performance test method Part 8. Product Dosage Testing

1 Scope

This part of SN/T 1730 specifies the method for testing the amount of individual products exported to fireworks and firecrackers. This section applies to the detection of the amount of export fireworks and firecrackers.

2 Normative references

The terms in the following documents become the provisions of this section by reference to this part of SN/T 1730. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section. SN/T 1725 export fireworks and firecracker terminology BS7114.1988 Test method for fireworks

3 Terms and definitions

The terms and definitions established by SN/T 1725 apply to this part of SN/T 1730.

4 Security

When dissecting small samples, wear protective gloves and a protective mask. The front of the head should be covered with tempered transparent glass and installed firmly. Remote anatomical devices should be used for large sample anatomy.

5 Detection methods

5.1 General products The samples were dissected one by one, and the fuses and debris were removed. When the single sample contains more than 1g, the balance is weighed with a balance of 0.1g; For a single sample containing 1.0 g or less, the balance was weighed with a balance of 0.001 g. 5.2 Special products 5.2.1 Paper Fire Hat Fireworks Optional 10 short paragraphs, each including a fireworks that remain intact after testing, then cut them off the reel and set the small sections Dry in a vacuum desiccator for 24h, take out a small section, weigh immediately (accuracy is 0.0001g), place the small section in a beaker of water, soak about 1h, take a small section from the beaker, gently wash off the paper layer and all the drugs with water, taking care not to lose the paper fiber. Put all the paper away After drying in a vacuum desiccator for 24 h, the paper was taken out and immediately weighed (accuracy was 0.0001 g). 5.2.2 Plastic Capsule Paper Fire Hat Fireworks Optional 10 short paragraphs, each with a fireworks that remain intact after testing, cut them off the circle, saying their quality, precision It is 0.0001 g. Cut each small section along the center of the fireworks with a sharp scalpel and place them in a beaker of 100 mL capacity. 20mL of nitric acid solution (1+1), insert into the magnetic stirrer, cover the beaker and stir for 30min, take out a small section, wash it with distilled water and wash it off. To check if the medicine is clean, if not washed, wash it off with water. 5.2.3 Plastic cup type fire hat fireworks Optional 10 short paragraphs, each with a fireworks that remain intact after testing, cut them down, say their quality, accuracy is ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 1730.8-2014_English be delivered?

Answer: Upon your order, we will start to translate SN/T 1730.8-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 1730.8-2014_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 1730.8-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version SN/T 1730.8-2014?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1730.8-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.