SN/T 1730.10-2014 English PDFUS$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 1730.10-2014: Safety performance test for export fireworks and firecrackers - Part 10: Safety performance for use Status: Valid SN/T 1730.10: Historical versions
Basic dataStandard ID: SN/T 1730.10-2014 (SN/T1730.10-2014)Description (Translated English): Safety performance test for export fireworks and firecrackers - Part 10: Safety performance for use Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: G89 Classification of International Standard: 71.100.30 Word Count Estimation: 6,626 Date of Issue: 12/1/2014 Date of Implementation: 5/1/2015 Older Standard (superseded by this standard): SN/T 1730.10-2006 Regulation (derived from): State-Quality-Inspection-accreditation [2014] 614 Issuing agency(ies): General Administration of Customs SN/T 1730.10-2006: Export fireworks safety performance test methods - Part 10: Use safety performance test---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Export fireworks safety performance test methods - Part 10. Use safety performance test People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard Export fireworks and firecrackers safety performance test method Part 10. Use safety performance test Released on.2006-01-26 Implementation of.2006-08-16 People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordSN/T 1730 "Safety Performance Test Method for Export Fireworks and Firecrackers" is divided into. --- Part 1. General; --- Part 2. 75 ° C thermal stability test; --- Part 3. Low temperature stability test; ---Part 4. Anti-vibration test; --- Part 5. Drop test; --- Part 6. Explosion test; --- Part 7. Packaging identification; --- Part 8. Product drug testing; --- Part 9. Aphorism label inspection; --- Part 10. Use safety performance test. This part is the 10th part of SN/T 1730. This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Jiangxi Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this section. Wu Jinsong, Liu Jieguang, Gui Jiaxiang, He Xiaohua, Lu Zhong, Zeng Shaohua. This section is the first industry standard for entry-exit inspection and quarantine. Export fireworks and firecrackers safety performance test method Part 10. Use safety performance test1 ScopeThis part of SN/T 1730 specifies the technical requirements and inspections for the safety performance of export fireworks and firecrackers (Class B, C, D). method. This section applies to the inspection of the safety performance of export fireworks and firecrackers (Class B, C, D).2 Normative referencesThe terms in the following documents become the provisions of this section by reference to this part of SN/T 1730. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section. SN/T 1725 export fireworks and firecracker terminology3 noun termsThe terms and definitions established by SN/T 1725 apply to this part of SN/T 1730.4 Technical requirements4.1 Parts The technical requirements of the components are shown in Table 1. Table 1 Component technical requirements Component technical requirements Base Fireworks fixed on the ground, the height of the tube is more than three times the outer diameter, the base should be installed. The product shall not be placed on a slope that is 12° from the horizontal. Add 50g weight to the main body that is hanging down, and hold the base for 1min without falling off. Fire line The ignition location of the ignition lead should be clearly marked. The ignition device of the fireworks and combination fireworks shall have a guarding device. The ignition lead should be able to lift the weight of the following specified mass for 1 min without falling off. a) If the quality of the product is < 10g, 10g of heavy objects shall be lifted; b) 10g ≤ product quality < 50g, should lift the weight of the product twice the weight; c) If the product quality is ≥ 50g, 100g of heavy objects should be lifted. If the inner diameter of a single firecracker is >5mm, it is not allowed to use a three-spreading solid primer as the bottom plug. Hanging wire using the hanging line of fireworks products, the length of the hanging wire is more than 50cm, should be able to add 50g weight on the main body to hang for 1min without falling off. All parts Hold the main body horizontally, from 400mm high, to the hardwood board with a thickness of 30mm or more, and repeat it three times. The various parts should not crack or fall off. 4.2 discharge performance The technical requirements for discharge performance are shown in Table 2. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1730.10-2014_English be delivered?Answer: Upon your order, we will start to translate SN/T 1730.10-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1730.10-2014_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1730.10-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 1730.10-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1730.10-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
