SN/T 1732.20-2016 English PDFUS$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 1732.20-2016: Pyrotechnic composition used for fireworks and firecracker--Part 20: Determination of strontium content--Flame atomic absorption spectroscopy Status: Valid
Basic dataStandard ID: SN/T 1732.20-2016 (SN/T1732.20-2016)Description (Translated English): Pyrotechnic composition used for fireworks and firecracker--Part 20: Determination of strontium content--Flame atomic absorption spectroscopy Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: G89 Word Count Estimation: 10,193 Date of Issue: 2016-12-12 Date of Implementation: 2017-07-01 Regulation (derived from): State-Quality-Inspection-Accredidation (2016) No.590 Issuing agency(ies): General Administration of Customs SN/T 1732.20-2016: Pyrotechnic composition used for fireworks and firecracker--Part 20: Determination of strontium content--Flame atomic absorption spectroscopy---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Pyrotechnic composition used for fireworks and firecracker--Part 20. Determination of strontium content--Flame atomic absorption spectroscopy China's entry-exit inspection and quarantine industry standards Fireworks, fireworks, pyrotechnics Part 20. Determination of antimony content Flame Atomic Absorption Part 20. Determinationofstrontiumcontent- Published on.2016-12-12 2017-07-01 Implementation China The State Administration of Quality Supervision, Inspection and Quarantine issued ForewordSN/T 1732 "Fireworks for fireworks and firecrackers" is divided into 20 parts. --- Part 1. Determination of antimony content; --- Part 2. Determination of dichromate content; --- Part 3. Determination of zinc content; --- Part 4. Determination of copper content; --- Part 5. Determination of titanium content; --- Part 6. Determination of antimony content; --- Part 7. Determination of lead content; --- Part 8. Determination of sodium content; ---Part 9. Determination of magnesium content; --- Part 10. Determination of sulfur content; --- Part 11. Determination of potassium content; --- Part 12. Determination of red phosphorus content; --- Part 13. Determination of boric acid content; --- Part 14. Qualitative detection methods for dextrins; --- Part 15. Testing methods for polyvinyl chloride; --- Part 16. Determination of picric acid - High performance liquid chromatography; --- Part 17 . Determination of hexachlorobenzene by gas chromatography ; --- Part 18. Methods for the detection of chlorinated paraffins; --- Part 19 . Determination of gallic acid by high performance liquid chromatography ; --- Part 20. Determination of antimony content - Flame atomic absorption method. This section is Part 20 of SN/T 1732. This section was drafted in accordance with the rules of GB/T 1.1-2009. This part is proposed and managed by the National Certification and Accreditation Regulatory Commission. This section was drafted by. Guangxi Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China and Jiangxi Entry-Exit Inspection Inspection Epidemic Bureau. The main drafters of this section. Shang Jie, Yan Chun, Liu Xiuhong, Zou Yanhua, Xiao Huanxin. Fireworks, fireworks, pyrotechnics Part 20. Determination of antimony content Flame Atomic Absorption Warning. The personnel using this section should have practical experience in regular laboratory work. This section does not indicate all possible security issues. It is the user's responsibility to adopt appropriate safety and health measures and to ensure compliance with the conditions set by the relevant national laws. This section deals with fireworks Pharmacy is a flammable and explosive dangerous goods. The following are the most important safety technical regulations. a) The preparation of the sample should be carried out under conditions with safety precautions; b) The preparation and storage of the sample shall not exceed the conditions allowed by the safety protection; c) The sample should be dried in a safe explosion-proof drying oven. Its drying temperature should not exceed 55°C.1 ScopeThis part of SN/T 1732 specifies flame atomic absorption spectrometry for the determination of antimony in pyrotechnic compositions for fireworks and firecrackers. This section applies to flame atomic absorption spectrometry for the determination of pyrotechnic compositions of fireworks. Measurement range. yttrium content (with yttrium mass Score) is greater than 0.5%.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 6682 Analysis Laboratory Water Specifications and Test Methods GB/T 8170 Representation and Determination of Numerical Rounding Rules and Limit Values GB/T 15813-1995 Firecracker and Firecracker Forming Agent Sample Separation and Smashing3 PrincipleAfter appropriate pretreatment of the sample, it was filtered to constant volume. The sample solution is injected into the flammable air-acetylene flame to form a helium ground state in a high-temperature flame. The 553.6nm characteristic line emitted by the sub-half hollow cathode lamp selectively absorbs, and its absorbance value is proportional to the mass concentration of helium.4 ReagentsUnless otherwise stated, only analytically pure reagents and at least Grade 3 water specified in GB/T 6682 were used in the analysis. 4.1 Ethanol. 4.2 Acetone. 4.3 nitric acid, superior grade pure. 4.4 Nitric acid solution (15). 4.5 Nitric acid solution (1 99). 4.6 Acetic acid. 4.7 Barium nitrate, spectrally pure. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1732.20-2016_English be delivered?Answer: Upon your order, we will start to translate SN/T 1732.20-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1732.20-2016_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1732.20-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |