SN/T 0822-2011 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 0822-2011	399	Add to Cart	3 days	Rules for the inspection of drill collars and square-hexagon kellys for import and export	Obsolete
SN/T 0822-1999	359	Add to Cart	3 days	Rules for the inspection of drill collars and square and hexagon kellys for import and export	Obsolete

Similar standards

SY/T 5164   SY/T 5324   SY 0007   

Basic data

Standard ID: SN/T 0822-2011 (SN/T0822-2011)
Description (Translated English): Rules for the inspection of drill collars and square-hexagon kellys for import and export
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: E92
Word Count Estimation: 10,162
Date of Issue: 2011-09-30
Date of Implementation: 2012-04-01
Older Standard (superseded by this standard): SN/T 0822-1999
Quoted Standard: API SPEC 5D; API SPEC 7
Regulation (derived from): National-Quality-Inspection-accreditation (2011) 492; Industry Standard Filing Announcement 2012 No.4 (Total No.148)
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the import and export of oil drilling boat, square and hexagonal kellys sampling, test items, decision rules face test methods and inspection results. This standard applies to the import and export of petroleum drill collar, square and hexagonal drill, butt -type drill pipe joints, drill stem test match with rotating joints and shoulder joints.

SN/T 0822-2011: Rules for the inspection of drill collars and square-hexagon kellys for import and export

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of drill collars and square-hexagon kellys for import and export People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 0822-1999 Import and export of drill collars, drill pipe inspection procedures Issued on. 2011-09-09 2012-04-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This standard reference APISpec5D and APISpec7 standard part of the main requirements, quality characteristics and indicators clear Quantization. Instead of the standard SN/T 0822-1999. This standard compared with SN/T 0822-1999, in addition to editorial changes, the main technical change Of the following. --- Increasing the test item selection (see 5.5); --- Delete other items test (see 1999 edition 5.5); --- Remove the defective batch export pipe disposal requirements (see the 1999 edition 6.2); --- Modify the processing of nonconforming product (see 6.2 and 6.3 in 1999). This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. Xinjiang People's Republic of China Entry-Exit Inspection and Quarantine of Hebei People's Republic of China Bureau, People's Republic of China Guangdong Entry Inspection and Quarantine Bureau. Drafters of this standard. the new chapter, Yang Zhong, birch, leather whole army, Zhangzhen Kun. This standard replaces the standards previously issued as follows. --- SN/T 0822-1999. Import and export of drill collars, drill pipe inspection procedures

1 Scope

This standard specifies the import and export of drill collars, square and hexagonal kellys sampling, test items, test methods and test results judgment Set rules. This standard applies to the import and export of drill collars, square and hexagonal rod, welded type tool joints, drill string with the shoulder joints and with a rotary table Test joints.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. APISpec5D drill Specification APISpec7 rotary drilling equipment

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Inspection Lot (referred batch) inspectionlot For the implementation of sampling and collection of bulk products. Each batch should be the same contract, the same dimensions, the same grade of steel and heat treatment system Degree, the same manufacturer with the arrival of a number of drill collars or kelly (hereinafter referred to as tubes) components. 3.2 Unit product unitproduct The need for the implementation of sampling basic unit of division. In this standard, that is, each of the tubes to be tested. 3.3 Substandard disqualification (nonconformity) Quality characteristics of the tube does not comply with the provisions referred to fail. Substandard quality characteristics represented by the importance of the quality of the tube, or by mass Characteristics do not meet the severity classified. 3.4 Nonconforming reject (product) There is more than one failure of the tube called unqualified. 3.5 A class failed Adisqualification A very important quality characteristics of the tube does not comply, or quality characteristics of the tube very non-compliant, called A category failed. 3.6 Class B failed Bdisqualification Important quality characteristics of the tube does not comply, the quality characteristics of the tube or serious non-compliance, called Class B failed. 3.7 Class C unqualified Cdisqualification General quality characteristics of the tube does not comply, or quality characteristics of the tube minor non-compliance, called class C failed. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 0822-2011_English be delivered?

Answer: Upon your order, we will start to translate SN/T 0822-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 0822-2011_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 0822-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version SN/T 0822-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 0822-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.