SN/T 0481.8-2010 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 0481.8-2010: Methods for inspection of bauxite for export. Part 8: Determination of sulfur content. High frequency combustion-infrared absorption method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 0481.8-2010	259	Add to Cart	3 days	Methods for inspection of bauxite for export. Part 8: Determination of sulfur content. High frequency combustion-infrared absorption method	Valid

Similar standards

SN/T 3321.2   SN/T 3321.1   SN/T 0481.7   SN/T 0481.5   SN/T 0481.11   SN/T 0481.10   

Basic data

Standard ID: SN/T 0481.8-2010 (SN/T0481.8-2010)
Description (Translated English): Methods for inspection of bauxite for export. Part 8: Determination of sulfur content. High frequency combustion-infrared absorption method
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: D54
Word Count Estimation: 10,135
Date of Issue: 2010-11-01
Date of Implementation: 2011-05-01
Quoted Standard: GB/T 2009; JJG 395
Regulation (derived from): National Quality Inspection (2010) 582
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the full export bauxite frequency combustion of sulfur content Infrared absorption method. This standard applies to exports of bauxite Determination of total sulfur, Measuring range: 0. 007% to 0. 10%.

SN/T 0481.8-2010: Methods for inspection of bauxite for export. Part 8: Determination of sulfur content. High frequency combustion-infrared absorption method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for inspection of bauxite for export Part 8. Determination of sulfur content High frequency combustion-infrared absorption method People's Republic of China Entry-Exit Inspection and Quarantine Standards Export bauxite test methods Part 8. High-frequency combustion - infrared absorption method Determination of sulfur content Part 8. Determinationofsulfurcontent-Highfrequency Issued on. 2010-11-01 2011-05-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

SN/T 0481 "Test Method export bauxite" series of standards are divided into the following sections. --- Part 1. mandelic acid with concealed titanium aluminum oxide content of EDTA; --- Part 2. molybdenum blue photometric method for determination of silicon dioxide; --- Part 3. sulfosalicylic acid spectrophotometric determination of the amount of ferric oxide; --- Part 4. Direct determination with EDTA calcium oxide and magnesium oxide content; --- Part 5. combustion - neutralization method for the determination of sulfur content; --- Part 6. Rapid Determination of bulk density bauxite; --- Part 7. Determination of ferric oxide, titanium oxide, silicon dioxide, calcium oxide spectrometry inductively coupled plasma atomic emission, MgO content; --- Part 8. High Frequency Burning - Determination of sulfur content infrared absorption method; --- Part 9. 1,10 phenanthroline photometric method for the determination of free iron. This section SN/T Section 80481 of. This section drafted in accordance with the rules of GB/T 1.1-2009, SN/T 1831-2006 given. Please note that some of the content of this section may involve patents. This part of the release mechanism does not assume the responsibility to identify these patents. This section proposed and managed by the National Certification and Accreditation Administration Committee. This section was drafted by. People's Republic of China Shandong Entry-Exit-Entry Inspection and Shanxi People's Republic of China Quarantine Bureau. The main drafters of this section. Ding Shibing, Qu Xiaoxia, Yang Xiaobing Liu juvenile, Zhou Zhongxin. The first part of the Department of Inspection and Quarantine issued by industry standards. Export bauxite test methods Part 8. High-frequency combustion - infrared absorption method Determination of sulfur content

1 Scope

SN/T 0481 provisions of this part of the export bauxite total sulfur content in the high-frequency combustion - infrared absorption spectrometry. This section applies to the determination of export bauxite total sulfur content in measuring range. 0.007% to 0.10%.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2009 bauxite bulk sampling and sample preparation method JJG395 Dingtan fixed sulfur analyzer

3 Method summary

After the sample pre-burning, high-frequency induction furnace in an oxygen stream of heated combustion generates sulfur dioxide from the oxygen contained in the infrared analyzer to measure Room to absorb specific wavelengths of infrared energy absorption signal is proportional to its concentration. According to the change in energy receiving detector, compared to a standard Substance Determination of sulfur content.

4 Reagents and materials

Unless otherwise indicated in the analysis using only recognized as analytical grade reagents and distilled water or equivalent purity. 4.1 Magnesium perchlorate. water, particle size of 0.7mm ~ 1.2mm. 4.2 Alkali Asbestos. granular. 4.3 tungsten particles. a sulfur content of less than 0.0005%, a particle size of 0.2mm ~ 1.2mm. 4.4 tin particles. a sulfur content of less than 0.0005%, a particle size of 0.2mm ~ 1.2mm. 4.5 tin capsules. diameter 6mm, height 18mm, the volume of 0.4mL. 4.6 iron flux. sulfur content of less than 0.0005%, a particle size of 0.8mm ~ 1.68mm. 4.7 Potassium. fines content of greater than 99.9%, dried at 105 ℃ 2h, cool in a desiccator. 4.8 sulfur standard solution (0.80mg/mL). Weigh potassium sulphate (4.7) 2.175g (accurate to 0.0001g), dissolved in distilled water and transferred to 500mL volumetric flask, dilute to the mark. 4.9 Oxygen. than 99.5% purity. 4.10 Power gas. nitrogen, purity greater than 99.5%.

5 Instruments

5.1 high-frequency combustion - infrared carbon and sulfur analyzer. JJG395 of compliance. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 0481.8-2010_English be delivered?

Answer: Upon your order, we will start to translate SN/T 0481.8-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 0481.8-2010_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 0481.8-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.